On 26/04/2022 07:26, Vyacheslav Bocharov wrote:
Signed-off-by: Vyacheslav Bocharov <ad...@lexina.in>
---
doc/board/amlogic/jethub-j100.rst | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/doc/board/amlogic/jethub-j100.rst
b/doc/board/amlogic/jethub-j100.rst
index d54519aaef..8081569bba 100644
--- a/doc/board/amlogic/jethub-j100.rst
+++ b/doc/board/amlogic/jethub-j100.rst
@@ -3,27 +3,31 @@
U-Boot for JetHub J100
=======================
-JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation
-controller manufactured by JetHome with the following specifications:
+JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a series of home
+automation controller manufactured by JetHome with the following
+specifications:
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- - 512Mb/1GB DDR3
- - 8/16GB eMMC flash
+ - 512MB/1GB DDR3 or 2GB DDR4 SDRAM
+ - 8/16/32GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE
- 802.11a/b/g/n/ac, Bluetooth 4.2.
- - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output
- power and Zigbee 3.0 support.
+ - WiFi / Bluetooth one from:
+ - AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2
+ - RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0
+ - Amlogic W155S1 WiFi5 IEEE 802.11a/b/g/n/ac, Bluetooth 5.2
- 2 x gpio LEDS
- GPIO user Button
+ - DC source with a voltage of 9 to 56 V / Passive POE
+ - DIN Rail Mounting case
+Basic version also has:
+ - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output
+ power and Zigbee 3.0 support.
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- - DC source with a voltage of 9 to 56 V / Passive POE
- - DIN Rail Mounting case
U-Boot compilation
------------------
Reviewed-by: Neil Armstrong <narmstr...@baylibre.com>
