Loongson 1C is a cost-effective SOC chip for industrial control and the Internet of Things. The Loongson 1C includes a floating-point processing unit, supports multiple types of memory, and supports high-capacity MLC NAND Flash. Loongson 1C provides developers with a wealth of peripheral interfaces and on-chip modules, including Camera controller, USB OTG and USB HOST interfaces, AC97/I2S controller, LCD controller, SPI interface, UART interface, etc., providing sufficient computing power and multi-application connectivity.
Some highlights of this SoC are: - Single core LS232, MIPS32 instruction set compatible, main frequency 300MHZ - 16KB data cache and 16KB instruction cache - 64 bit float unit, hardware division - 8/16 bit SDRAM controller, 45 ~ 133MHz - 8/16 bit SRAM, NAND - I2S/AC97, LCD, MAC, USB, OTG, SPI, I2C, PWM, CAN, SDIO, ADC - 12 UARTs See Techinical Reference Manual for details: https://www.loongson.cn/ introduce base support for the ls1c300 SoC. - debug UART2 - serial console - clock - watchdog - sysreset - many uarts Signed-off-by: Du Huanpeng <d...@hodcarrier.org> --- arch/mips/Kconfig | 25 +++ arch/mips/Makefile | 1 + arch/mips/dts/Makefile | 1 + arch/mips/dts/loongson32-ls1c300b.dtsi | 138 +++++++++++++++++ arch/mips/dts/ls1c300-eval.dts | 27 ++++ arch/mips/mach-lsmips/Kconfig | 77 ++++++++++ arch/mips/mach-lsmips/Makefile | 6 + arch/mips/mach-lsmips/cpu.c | 24 +++ arch/mips/mach-lsmips/include/mach/serial.h | 16 ++ arch/mips/mach-lsmips/ls1c300/Makefile | 6 + arch/mips/mach-lsmips/ls1c300/gpio.c | 60 ++++++++ arch/mips/mach-lsmips/ls1c300/init.c | 60 ++++++++ arch/mips/mach-lsmips/ls1c300/lowlevel_init.S | 123 +++++++++++++++ arch/mips/mach-lsmips/ls1c300/ls1c300.h | 52 +++++++ arch/mips/mach-lsmips/ls1c300/serial.c | 112 ++++++++++++++ arch/mips/mach-lsmips/spl.c | 47 ++++++ board/loongson/ls1c300-eval/Kconfig | 12 ++ board/loongson/ls1c300-eval/MAINTAINERS | 7 + board/loongson/ls1c300-eval/Makefile | 3 + board/loongson/ls1c300-eval/board.c | 20 +++ configs/ls1c300_defconfig | 65 ++++++++ drivers/clk/Makefile | 1 + drivers/clk/lsmips/Makefile | 3 + drivers/clk/lsmips/clk-ls1c300.c | 145 ++++++++++++++++++ drivers/watchdog/Kconfig | 8 + drivers/watchdog/Makefile | 1 + drivers/watchdog/lsmips_wdt.c | 126 +++++++++++++++ include/configs/ls1c300.h | 61 ++++++++ include/dt-bindings/clock/ls1c300-clk.h | 48 ++++++ 29 files changed, 1275 insertions(+) create mode 100644 arch/mips/dts/loongson32-ls1c300b.dtsi create mode 100644 arch/mips/dts/ls1c300-eval.dts create mode 100644 arch/mips/mach-lsmips/Kconfig create mode 100644 arch/mips/mach-lsmips/Makefile create mode 100644 arch/mips/mach-lsmips/cpu.c create mode 100644 arch/mips/mach-lsmips/include/mach/serial.h create mode 100644 arch/mips/mach-lsmips/ls1c300/Makefile create mode 100644 arch/mips/mach-lsmips/ls1c300/gpio.c create mode 100644 arch/mips/mach-lsmips/ls1c300/init.c create mode 100644 arch/mips/mach-lsmips/ls1c300/lowlevel_init.S create mode 100644 arch/mips/mach-lsmips/ls1c300/ls1c300.h create mode 100644 arch/mips/mach-lsmips/ls1c300/serial.c create mode 100644 arch/mips/mach-lsmips/spl.c create mode 100644 board/loongson/ls1c300-eval/Kconfig create mode 100644 board/loongson/ls1c300-eval/MAINTAINERS create mode 100644 board/loongson/ls1c300-eval/Makefile create mode 100644 board/loongson/ls1c300-eval/board.c create mode 100644 configs/ls1c300_defconfig create mode 100644 drivers/clk/lsmips/Makefile create mode 100644 drivers/clk/lsmips/clk-ls1c300.c create mode 100644 drivers/watchdog/lsmips_wdt.c create mode 100644 include/configs/ls1c300.h create mode 100644 include/dt-bindings/clock/ls1c300-clk.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 28234aa0bb..d95868ef4b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -93,6 +93,30 @@ config ARCH_MTMIPS select SUPPORTS_LITTLE_ENDIAN select SUPPORT_SPL +config ARCH_LSMIPS + bool "Support Loongson MIPS platforms" + select CLK + imply CMD_DM + select DISPLAY_CPUINFO + select DM + imply DM_ETH + imply DM_GPIO + select DM_RESET + select DM_SERIAL + select PINCTRL + select PINMUX + select PINCONF + select RESET_LSMIPS + imply DM_SPI + imply DM_SPI_FLASH + select OF_CONTROL + select ROM_EXCEPTION_VECTORS + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 + select SUPPORTS_LITTLE_ENDIAN + select SYSRESET + select SUPPORT_SPL + config ARCH_JZ47XX bool "Support Ingenic JZ47xx" select SUPPORT_SPL @@ -174,6 +198,7 @@ source "arch/mips/mach-bmips/Kconfig" source "arch/mips/mach-jz47xx/Kconfig" source "arch/mips/mach-pic32/Kconfig" source "arch/mips/mach-mtmips/Kconfig" +source "arch/mips/mach-lsmips/Kconfig" source "arch/mips/mach-octeon/Kconfig" if MIPS diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 6502aebd29..e944502497 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -16,6 +16,7 @@ machine-$(CONFIG_ARCH_BMIPS) += bmips machine-$(CONFIG_ARCH_JZ47XX) += jz47xx machine-$(CONFIG_MACH_PIC32) += pic32 machine-$(CONFIG_ARCH_MTMIPS) += mtmips +machine-$(CONFIG_ARCH_LSMIPS) += lsmips machine-$(CONFIG_ARCH_MSCC) += mscc machine-${CONFIG_ARCH_OCTEON} += octeon diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile index 95144b24dc..915acfd573 100644 --- a/arch/mips/dts/Makefile +++ b/arch/mips/dts/Makefile @@ -19,6 +19,7 @@ dtb-$(CONFIG_BOARD_MT7620_MT7530_RFB) += mediatek,mt7620-mt7530-rfb.dtb dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb dtb-$(CONFIG_BOARD_GARDENA_SMART_GATEWAY_MT7688) += gardena-smart-gateway-mt7688.dtb dtb-$(CONFIG_BOARD_LINKIT_SMART_7688) += linkit-smart-7688.dtb +dtb-$(CONFIG_BOARD_LS1C300) += ls1c300-eval.dtb dtb-$(CONFIG_TARGET_OCTEON_EBB7304) += mrvl,octeon-ebb7304.dtb dtb-$(CONFIG_TARGET_OCTEON_NIC23) += mrvl,octeon-nic23.dtb dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb diff --git a/arch/mips/dts/loongson32-ls1c300b.dtsi b/arch/mips/dts/loongson32-ls1c300b.dtsi new file mode 100644 index 0000000000..a574495301 --- /dev/null +++ b/arch/mips/dts/loongson32-ls1c300b.dtsi @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/clock/ls1c300-clk.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "loongson,ls1c300-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + reg = <0>; + compatible = "loongson,gs232", "mips,mips4Kc"; + clocks = <&acc CLK_CPU>; + }; + }; + + xtal: oscillator@0 { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + // TODO: add more device. + + acc: clock-controller@1fe78030 { + compatible = "loongson,ls1c300-clk"; + clocks = <&xtal>; + #clock-cells = <1>; + reg = <0x1fe78030 0x8>, <0x1fe7c010 0x4>; + u-boot,dm-pre-reloc; + }; + + uart0: serial@1fe40000 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART0>; + reg = <0x1fe40000 0x100>; + reg-shift = <0>; + }; + + uart1: serial@1fe44000 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART1>; + reg = <0x1fe44000 0x100>; + reg-shift = <0>; + }; + + uart2: serial@bfe48000 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART2>; + reg = <0xbfe48000 0x100>; + reg-shift = <0>; + }; + + uart3: serial@1fe4c000 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART3>; + reg = <0x1fe4c000 0x100>; + reg-shift = <0>; + }; + + uart4: serial@1fe4c400 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART4>; + reg = <0x1fe4c400 0x100>; + reg-shift = <0>; + }; + + uart5: serial@1fe4c500 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART5>; + reg = <0x1fe4c500 0x100>; + reg-shift = <0>; + }; + + uart6: serial@1fe4c600 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART6>; + reg = <0x1fe4c600 0x100>; + reg-shift = <0>; + }; + + uart7: serial@1fe4c700 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART7>; + reg = <0x1fe4c700 0x100>; + reg-shift = <0>; + }; + + uart8: serial@1fe4c800 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART8>; + reg = <0x1fe4c800 0x100>; + reg-shift = <0>; + }; + + uart9: serial@1fe4c900 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART9>; + reg = <0x1fe4c900 0x100>; + reg-shift = <0>; + }; + + uart10: serial@1fe4ca00 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART10>; + reg = <0x1fe4ca00 0x100>; + reg-shift = <0>; + }; + + uart11: serial@1fe4cb00 { + compatible = "ns16550a"; + clocks = <&acc CLK_UART11>; + reg = <0x1fe4cb00 0x100>; + reg-shift = <0>; + }; + + wdt: watchdog@1fe5c060 { + compatible = "loongson,ls1c300-wdt"; + clocks = <&acc CLK_WDT>; + reg = <0x1fe5c060 0x10>; + }; + + reset-controller { + compatible = "wdt-reboot"; + wdt = <&wdt>; + }; + + }; +}; diff --git a/arch/mips/dts/ls1c300-eval.dts b/arch/mips/dts/ls1c300-eval.dts new file mode 100644 index 0000000000..5bf1ec0985 --- /dev/null +++ b/arch/mips/dts/ls1c300-eval.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Du Huanpeng <d...@hodcarrier.org> + */ + +/dts-v1/; + +#include "loongson32-ls1c300b.dtsi" + +/ { + compatible = "lsmips,ls1c300-soc"; + model = "ls1c300-eval"; + + aliases { + console = &uart2; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart2; + }; +}; + +&uart2 { + status = "okay"; +}; + diff --git a/arch/mips/mach-lsmips/Kconfig b/arch/mips/mach-lsmips/Kconfig new file mode 100644 index 0000000000..cb679875a7 --- /dev/null +++ b/arch/mips/mach-lsmips/Kconfig @@ -0,0 +1,77 @@ +menu "Loongson MIPS platforms" + depends on ARCH_LSMIPS + +config SYS_MALLOC_F_LEN + default 0x1000 + +config SYS_SOC + default "ls1c300" if SOC_LS1C300 + +config SYS_DCACHE_SIZE + default 16384 + +config SYS_DCACHE_LINE_SIZE + default 32 + +config SYS_ICACHE_SIZE + default 16384 + +config SYS_ICACHE_LINE_SIZE + default 32 + +config SYS_TEXT_BASE + default 0xbfc00000 if !SPL + default 0x80200000 if SPL + +config SPL_TEXT_BASE + default 0xbfc00000 + +config SPL_PAYLOAD + default "u-boot-lzma.img" if SPL_LZMA + +config BUILD_TARGET + default "u-boot-with-spl.bin" if SPL + +choice + prompt "Loongson MIPS SoC select" + +config SOC_LS1C300 + bool "LS1C300" + select MIPS_L1_CACHE_SHIFT_5 + select PINCTRL_LS1C300 + select CLK_CCF + select SPL_SEPARATE_BSS if SPL + select SPL_INIT_STACK_WITHOUT_MALLOC_F if SPL + select SPL_LOADER_SUPPORT if SPL + select SPL_OF_CONTROL if SPL_DM + select SPL_SIMPLE_BUS if SPL_DM + select SPL_DM_SERIAL if SPL_DM + select SPL_CLK if SPL_DM && SPL_SERIAL + select SPL_SYSRESET if SPL_DM + select SPL_OF_LIBFDT if SPL_OF_CONTROL + help + This supports Loongson LS1C300 + +endchoice + +choice + prompt "Board select" + +config BOARD_LS1C300 + bool "Loongson LS1C300 Eval" + depends on SOC_LS1C300 + help + ls1c300-eval board has a LS1C300 SoC with 64MiB of SDRAM + and 512KiB of flash (SPI NOR) and additional NAND storage. + +endchoice + +config CONS_PIN_SELECT + int "pin group used in uart" + default 0 + help + Select pin group connected to UART for your board. + +source "board/loongson/ls1c300-eval/Kconfig" + +endmenu diff --git a/arch/mips/mach-lsmips/Makefile b/arch/mips/mach-lsmips/Makefile new file mode 100644 index 0000000000..654143a5f7 --- /dev/null +++ b/arch/mips/mach-lsmips/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y += cpu.o +obj-$(CONFIG_SPL_BUILD) += spl.o + +obj-$(CONFIG_SOC_LS1C300) += ls1c300/ diff --git a/arch/mips/mach-lsmips/cpu.c b/arch/mips/mach-lsmips/cpu.c new file mode 100644 index 0000000000..00513253e8 --- /dev/null +++ b/arch/mips/mach-lsmips/cpu.c @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Stefan Roese <s...@denx.de> + */ + +#include <common.h> +#include <init.h> +#include <malloc.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/sizes.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ +#ifdef CONFIG_SKIP_LOWLEVEL_INIT + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_256M); +#else + gd->ram_size = SZ_64M; +#endif + + return 0; +} diff --git a/arch/mips/mach-lsmips/include/mach/serial.h b/arch/mips/mach-lsmips/include/mach/serial.h new file mode 100644 index 0000000000..4da1cb434c --- /dev/null +++ b/arch/mips/mach-lsmips/include/mach/serial.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: Gao Weijie <weijie....@mediatek.com> + * + * Copyright (C) 2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#ifndef __LSMIPS_SERIAL_H_ +#define __LSMIPS_SERIAL_H_ + +void lsmips_spl_serial_init(void); +int gpio_set_alternate(int gpio, int func); + +#endif /* __LSMIPS_SERIAL_H_ */ diff --git a/arch/mips/mach-lsmips/ls1c300/Makefile b/arch/mips/mach-lsmips/ls1c300/Makefile new file mode 100644 index 0000000000..d30069e67e --- /dev/null +++ b/arch/mips/mach-lsmips/ls1c300/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += lowlevel_init.o +obj-y += init.o +obj-y += gpio.o +obj-$(CONFIG_SPL_BUILD) += serial.o diff --git a/arch/mips/mach-lsmips/ls1c300/gpio.c b/arch/mips/mach-lsmips/ls1c300/gpio.c new file mode 100644 index 0000000000..cca91aed93 --- /dev/null +++ b/arch/mips/mach-lsmips/ls1c300/gpio.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#include <linux/errno.h> +#include <linux/bitops.h> +#include <asm/bitops.h> +#include <asm/io.h> + +#define CBUS_FIRST0 0xbfd011c0 +#define CBUS_SECOND0 0xbfd011d0 +#define CBUS_THIRD0 0xbfd011e0 +#define CBUS_FOURTHT0 0xbfd011f0 +#define CBUS_FIFTHT0 0xbfd01200 + +#define CBUS_FIRST1 0xbfd011c4 +#define CBUS_SECOND1 0xbfd011d4 +#define CBUS_THIRD1 0xbfd011e4 +#define CBUS_FOURTHT1 0xbfd011f4 +#define CBUS_FIFTHT1 0xbfd01204 + +#define CBUS_FIRST2 0xbfd011c8 +#define CBUS_SECOND2 0xbfd011d8 +#define CBUS_THIRD2 0xbfd011e8 +#define CBUS_FOURTHT2 0xbfd011f8 +#define CBUS_FIFTHT2 0xbfd01208 + +#define CBUS_FIRST3 0xbfd011cc +#define CBUS_SECOND3 0xbfd011dc +#define CBUS_THIRD3 0xbfd011ec +#define CBUS_FOURTHT3 0xbfd011fc +#define CBUS_FIFTHT3 0xbfd0120c + +int gpio_set_alternate(int gpio, int func) +{ + volatile void __iomem *addr; + int i; + + if (gpio < 0 || gpio > 104) + return -ENODEV; + if (func < 0) + return -EINVAL; + + if (func) { + i = func - 1; + addr = (void *)CBUS_FIRST0 + i * 16; + set_bit(gpio, addr); + } else { + /* GPIO, clear CBUS 1 ~ 5 */ + i = 5; + } + + while (i--) { + addr = (void *)CBUS_FIRST0 + 16 * i; + clear_bit(gpio, addr); + } + + return 0; +} diff --git a/arch/mips/mach-lsmips/ls1c300/init.c b/arch/mips/mach-lsmips/ls1c300/init.c new file mode 100644 index 0000000000..457beeedca --- /dev/null +++ b/arch/mips/mach-lsmips/ls1c300/init.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: Gao Weijie <weijie....@mediatek.com> + * + * based on: arch/mips/mach-mtmips/mt7628/init.c + * Copyright (C) 2020-2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <dm/uclass.h> +#include <dt-bindings/clock/ls1c300-clk.h> +#include <linux/io.h> +#include <linux/sizes.h> +#include "ls1c300.h" + +DECLARE_GLOBAL_DATA_PTR; + +int print_cpuinfo(void) +{ + struct udevice *udev; + struct clk clk; + int ret; + ulong xtal; + char buf[SZ_32]; + + printf("CPU: Loongson ls1c300b\n"); + + ret = uclass_get_device_by_driver(UCLASS_CLK, DM_DRIVER_GET(ls1c300_clk), &udev); + + if (ret) { + printf("error: clock driver not found.\n"); + return 0; + } + + clk.dev = udev; + + clk.id = CLK_XTAL; + xtal = clk_get_rate(&clk); + + clk.id = CLK_CPU_THROT; + gd->cpu_clk = clk_get_rate(&clk); + + clk.id = CLK_SDRAM; + gd->mem_clk = clk_get_rate(&clk); + + printf("Clock: CPU: %sMHz, ", strmhz(buf, gd->cpu_clk)); + printf("SDRAM: %sMHz, ", strmhz(buf, gd->mem_clk)); + printf("XTAL: %sMHz\n", strmhz(buf, xtal)); + + return 0; +} + +ulong notrace get_tbclk(void) +{ + return gd->cpu_clk; +} diff --git a/arch/mips/mach-lsmips/ls1c300/lowlevel_init.S b/arch/mips/mach-lsmips/ls1c300/lowlevel_init.S new file mode 100644 index 0000000000..f9e2f94e83 --- /dev/null +++ b/arch/mips/mach-lsmips/ls1c300/lowlevel_init.S @@ -0,0 +1,123 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: Gao Weijie <weijie....@mediatek.com> + * + * Copyright (C) 2020-2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#include <config.h> +#include <asm-offsets.h> +#include <asm/cacheops.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/asm.h> +#include <linux/sizes.h> + +/* PLL */ +#define NAND_BASE 0xbfe78000 +#define START_FREQ 0xbfe78030 +#define CLK_DIV_PARAM 0xbfe78034 + +/* SPI */ +#define SPI0_BASE 0xbfe80000 + +/* SDRAM */ +#define SD_CONFIG 0xbfd00000 +#define SD_CONFIGL 0xbfd00410 +#define SD_CONFIGH 0xbfd00414 + + .set noreorder + +/* PLL: 264MHz CPU: 132MHz SDRAM: 66MHz */ +LEAF(ls1c300_pll_init) +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + li t0, NAND_BASE + li t2, 555844098 + sw t2, 0x34 (t0) + + li t1, 2147494924 + sw t1, 0x30 (t0) + + ori t2, 1 + sw t2, 0x34 (t0) +#endif +/* TODO: recalc rate to v0 */ + li v0, 132000000 + jr ra + nop +END(ls1c300_pll_init) + +/* SPI: Dual IO@33MHz */ +LEAF(ls1c300_spi_init) +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + li t0, SPI0_BASE + li t1, 0x07 + li t2, 0x05 + sb t1, 0x4(t0) + sb t1, 0x6(t0) +#endif + jr ra + nop +END(ls1c300_spi_init) + +/* SDRAM: 66MHz */ +// 8M x 16Bit x 4 Banks */ +// Organization | Row Address | Column Address +// 32Mx16 | A0~A12 | A0-A9 + +// 128Mx4 | A0~A12 | A0-A9, A11, A12 +// 64Mx8 | A0~A12 | A0-A9, A11 +// 32Mx16 | A0~A12 | A0-A9 + +LEAF(ls1c300_sdram_init) +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + li t0, SD_CONFIG + li t1, 0x028A924A + li t2, 0x00000028 +sdram_cfg: + sw t1, 0x410(t0) + sw t2, 0x414(t0) + nop + sw t1, 0x410(t0) + sw t2, 0x414(t0) + ori t2, 0x200 + sw t1, 0x410(t0) + sw t2, 0x414(t0) +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + li v0, SZ_64M + jr ra + nop +END(ls1c300_sdram_init) + + +/* + * SDRAM@132MHz, CPU@297MHz, SPI@33MHz + * SDRAM@100MHz, CPU@300MHz, SPI@50MHz + * SDRAM@66MHz, CPU@132MHz, SPI@33MHz <-- + */ + +NESTED(lowlevel_init, 0, ra) + /* Save ra and do real lowlevel initialization */ + move s0, ra + /* Setup PLL @264MHz */ + PTR_LA t9, ls1c300_pll_init + jalr t9 + nop + + /* Setup SPI Dual IO@33MHz */ + PTR_LA t9, ls1c300_spi_init + jalr t9 + nop + + /* Setup external SDRAM @66MHz */ + PTR_LA t9, ls1c300_sdram_init + jalr t9 + nop + + move ra, s0 + jr ra + nop +END(lowlevel_init) diff --git a/arch/mips/mach-lsmips/ls1c300/ls1c300.h b/arch/mips/mach-lsmips/ls1c300/ls1c300.h new file mode 100644 index 0000000000..70a5def841 --- /dev/null +++ b/arch/mips/mach-lsmips/ls1c300/ls1c300.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#ifndef __LS1C300_H__ +#define __LS1C300_H__ + +/* generated, don't edit */ + +#define SDRAM_BASE 0x00000000 +#define CAMERA_BASE 0x1c280000 +#define DC_BASE 0x1c300000 +#define AXIMUX_BASE 0x1f000000 + +#define SPI0MEM_BASE 0x1d000000 +#define SPI1MEM_BASE 0x1e000000 +#define Boot_BASE 0xbfc00000 +#define CONFREG_BASE 0x1fd00000 +#define OTG_BASE 0x1fe00000 +#define MAC_BASE 0x1fe10000 +#define USB_BASE 0x1fe20000 +#define APB_BASE 0x1fe40000 +#define SPI0_BASE 0x1fe80000 +#define SPI1_BASE 0x1fec0000 + +#define UART0_BASE 0x1fe40000 +#define UART1_BASE 0x1fe44000 +#define UART2_BASE 0x1fe48000 +#define UART3_BASE 0x1fe4c000 +#define UART4_BASE 0x1fe4c400 +#define UART5_BASE 0x1fe4c500 +#define UART6_BASE 0x1fe4c600 +#define UART7_BASE 0x1fe4c700 +#define UART8_BASE 0x1fe4c800 +#define UART9_BASE 0x1fe4c900 +#define UART10_BASE 0x1fe4ca00 +#define UART11_BASE 0x1fe4cb00 +#define CAN0_BASE 0x1fe50000 +#define CAN1_BASE 0x1fe54000 +#define I2C0_BASE 0x1fe58000 +#define PWM_BASE 0x1fe5c000 +#define I2S_BASE 0x1fe60000 +#define RTC_BASE 0x1fe64000 +#define I2C1_BASE 0x1fe68000 +#define SDIO_BASE 0x1fe6c000 +#define I2C2_BASE 0x1fe70000 +#define ADC_BASE 0x1fe74000 +#define NAND_BASE 0x1fe78000 +#define HCNTR_BASE 0x1fe7c000 + +#endif /* __LS1C300_H__ */ diff --git a/arch/mips/mach-lsmips/ls1c300/serial.c b/arch/mips/mach-lsmips/ls1c300/serial.c new file mode 100644 index 0000000000..88bc18ef85 --- /dev/null +++ b/arch/mips/mach-lsmips/ls1c300/serial.c @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: Gao Weijie <weijie....@mediatek.com> + * + * Copyright (C) 2020-2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#include <common.h> +#include <asm/io.h> +#include <mach/serial.h> +#include <linux/kernel.h> +#include "ls1c300.h" + +struct uart_pin_config { + char port; + char af; + char rx; + char tx; +}; + +struct uart_pin_config con[] = { +#if CONFIG_CONS_INDEX == 0 +{ 0, 2, 74, 75 }, +{ 0, 3, 23, 24 }, +{ 0, 3, 99, 100 }, + +#elif CONFIG_CONS_INDEX == 1 +{ 1, 1, 17, 18 }, +{ 1, 1, 101, 102 }, +{ 1, 2, 40, 41 }, +{ 1, 4, 2, 3 }, + +#elif CONFIG_CONS_INDEX == 2 +{ 2, 2, 36, 37 }, +{ 2, 2, 42, 43 }, +{ 2, 3, 27, 28 }, +{ 2, 3, 103, 104 }, +{ 2, 4, 4, 5 }, + +#elif CONFIG_CONS_INDEX == 3 +{ 3, 2, 17, 18 }, +{ 3, 2, 33, 34 }, +{ 3, 2, 44, 45 }, +{ 3, 4, 0, 1 }, + +#elif CONFIG_CONS_INDEX == 4 +{ 4, 5, 23, 24 }, +{ 4, 5, 58, 59 }, +{ 4, 5, 80, 79 }, + +#elif CONFIG_CONS_INDEX == 5 +{ 5, 5, 25, 26 }, +{ 5, 5, 60, 61 }, +{ 5, 5, 81, 78 }, + +#elif CONFIG_CONS_INDEX == 6 +{ 6, 5, 27, 46 }, +{ 6, 5, 62, 63 }, + +#elif CONFIG_CONS_INDEX == 7 +{ 7, 5, 57, 56 }, +{ 7, 5, 64, 65 }, +{ 7, 5, 87, 88 }, + +#elif CONFIG_CONS_INDEX == 8 +{ 8, 5, 55, 54 }, +{ 8, 5, 66, 67 }, +{ 8, 5, 89, 90 }, + +#elif CONFIG_CONS_INDEX == 9 +{ 9, 5, 53, 52 }, +{ 9, 5, 68, 69 }, +{ 9, 5, 85, 86 }, + +#elif CONFIG_CONS_INDEX == 10 +{ 10, 5, 51, 50 }, +{ 10, 5, 70, 71 }, +{ 10, 5, 84, 82 }, + +#elif CONFIG_CONS_INDEX == 11 +{ 11, 5, 49, 48 }, +{ 11, 5, 72, 73 }, +#endif /* CONFIG_CONS_INDEX */ +}; + +#define UART2_RX 36 +#define UART2_TX 37 +#define AFUNC 2 + +void lsmips_spl_serial_init(void) +{ +#ifdef CONFIG_SPL_SERIAL + int pin_rx, pin_tx; + int afunc; + + if (CONFIG_CONS_PIN_SELECT < ARRAY_SIZE(con)) { + pin_rx = con[CONFIG_CONS_PIN_SELECT].rx; + pin_tx = con[CONFIG_CONS_PIN_SELECT].tx; + afunc = con[CONFIG_CONS_PIN_SELECT].af; + } else { + pin_rx = UART2_RX; + pin_tx = UART2_TX; + afunc = AFUNC; + } + + gpio_set_alternate(pin_rx, afunc); + gpio_set_alternate(pin_tx, afunc); +#endif /* CONFIG_SPL_SERIAL */ + return ; +} diff --git a/arch/mips/mach-lsmips/spl.c b/arch/mips/mach-lsmips/spl.c new file mode 100644 index 0000000000..c7c28989f2 --- /dev/null +++ b/arch/mips/mach-lsmips/spl.c @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 MediaTek Inc. All Rights Reserved. + * + * Author: Gao Weijie <weijie....@mediatek.com> + * + * Copyright (C) 2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#include <common.h> +#include <init.h> +#include <spl.h> +#include <asm/sections.h> +#include <linux/libfdt.h> +#include <linux/sizes.h> +#include <mach/serial.h> + +void __noreturn board_init_f(ulong dummy) +{ + spl_init(); + +#ifdef CONFIG_SPL_SERIAL + /* + * lsmips_spl_serial_init() is useful if debug uart is enabled, + * or DM based serial is not enabled. + */ + lsmips_spl_serial_init(); + preloader_console_init(); +#endif + + board_init_r(NULL, 0); +} + +void board_boot_order(u32 *spl_boot_list) +{ + spl_boot_list[0] = BOOT_DEVICE_NOR; +} + +unsigned long spl_nor_get_uboot_base(void) +{ + void *uboot_base = __image_copy_end; + + if (fdt_magic(uboot_base) == FDT_MAGIC) + return (unsigned long)uboot_base + fdt_totalsize(uboot_base); + + return (unsigned long)uboot_base; +} diff --git a/board/loongson/ls1c300-eval/Kconfig b/board/loongson/ls1c300-eval/Kconfig new file mode 100644 index 0000000000..e427570a83 --- /dev/null +++ b/board/loongson/ls1c300-eval/Kconfig @@ -0,0 +1,12 @@ +if BOARD_LS1C300 + +config SYS_BOARD + default "ls1c300-eval" + +config SYS_VENDOR + default "loongson" + +config SYS_CONFIG_NAME + default "ls1c300" + +endif diff --git a/board/loongson/ls1c300-eval/MAINTAINERS b/board/loongson/ls1c300-eval/MAINTAINERS new file mode 100644 index 0000000000..5420198dab --- /dev/null +++ b/board/loongson/ls1c300-eval/MAINTAINERS @@ -0,0 +1,7 @@ +LS1C300_EVAL BOARD +M: Du Huanpeng<d...@hodcarrier.org> +S: Maintained +F: board/loongson/ls1c300-eval +F: include/configs/ls1c300.h +F: configs/ls1c300_defconfig +F: arch/mips/dts/ls1c300-eval.dts diff --git a/board/loongson/ls1c300-eval/Makefile b/board/loongson/ls1c300-eval/Makefile new file mode 100644 index 0000000000..db129c5aba --- /dev/null +++ b/board/loongson/ls1c300-eval/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += board.o diff --git a/board/loongson/ls1c300-eval/board.c b/board/loongson/ls1c300-eval/board.c new file mode 100644 index 0000000000..2f588a0dcb --- /dev/null +++ b/board/loongson/ls1c300-eval/board.c @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020-2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#include <common.h> +#include <mach/serial.h> + +#ifdef CONFIG_DEBUG_UART_BOARD_INIT + +#define UART2_RX 36 +#define UART2_TX 37 +#define AFUNC 2 + +void board_debug_uart_init(void) +{ + gpio_set_alternate(UART2_TX, AFUNC); + gpio_set_alternate(UART2_RX, AFUNC); +} +#endif diff --git a/configs/ls1c300_defconfig b/configs/ls1c300_defconfig new file mode 100644 index 0000000000..c47fe5b98f --- /dev/null +++ b/configs/ls1c300_defconfig @@ -0,0 +1,65 @@ +CONFIG_MIPS=y +CONFIG_SYS_MALLOC_F_LEN=0x40000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x1000 +CONFIG_ENV_OFFSET=0x30000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DEFAULT_DEVICE_TREE="ls1c300-eval" +CONFIG_SPL_SERIAL=y +CONFIG_SPL_SIZE_LIMIT=0x100000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_BASE=0xbfe48000 +CONFIG_DEBUG_UART_CLOCK=66000000 +CONFIG_ARCH_LSMIPS=y +CONFIG_SPL_PAYLOAD="u-boot.img" +# CONFIG_MIPS_CACHE_SETUP is not set +# CONFIG_MIPS_CACHE_DISABLE is not set +CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y +CONFIG_MIPS_BOOT_FDT=y +CONFIG_DEBUG_UART=y +CONFIG_SYS_LOAD_ADDR=0x80010000 +CONFIG_FIT=y +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_LOGLEVEL=9 +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_NOR_SUPPORT=y +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_CLK=y +# CONFIG_CMD_DM is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_SPI=y +CONFIG_CMD_WDT=y +# CONFIG_PARTITIONS is not set +CONFIG_OF_EMBED=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_NET is not set +# CONFIG_INPUT is not set +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_XMC=y +CONFIG_CONS_INDEX=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_SYSRESET_WATCHDOG_AUTO=y +CONFIG_WATCHDOG_TIMEOUT_MSECS=3000 +CONFIG_WDT_LSMIPS=y +CONFIG_REGEX=y +CONFIG_LZMA=y +CONFIG_SPL_LZMA=y +CONFIG_SPL_GZIP=y diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index bb4eee5d99..51562ca4a6 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -17,6 +17,7 @@ obj-y += tegra/ obj-y += ti/ obj-$(CONFIG_$(SPL_TPL_)CLK_INTEL) += intel/ obj-$(CONFIG_ARCH_ASPEED) += aspeed/ +obj-$(CONFIG_ARCH_LSMIPS) += lsmips/ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ obj-$(CONFIG_ARCH_MESON) += meson/ obj-$(CONFIG_ARCH_MTMIPS) += mtmips/ diff --git a/drivers/clk/lsmips/Makefile b/drivers/clk/lsmips/Makefile new file mode 100644 index 0000000000..0a47269cd3 --- /dev/null +++ b/drivers/clk/lsmips/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_SOC_LS1C300) += clk-ls1c300.o diff --git a/drivers/clk/lsmips/clk-ls1c300.c b/drivers/clk/lsmips/clk-ls1c300.c new file mode 100644 index 0000000000..c78e23d695 --- /dev/null +++ b/drivers/clk/lsmips/clk-ls1c300.c @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * reference: + * drivers/clk/microchip/mpfs_clk.c + * drivers/clk/clk_octeon.c + * + * Copyright (C) 2020-2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <dt-bindings/clock/ls1c300-clk.h> +#include <linux/bitops.h> +#include <linux/bitfield.h> +#include <linux/io.h> +#include <linux/clk-provider.h> + +/* START_FREQ */ +#define PLL_VALID BIT(31) +#define RESERVED0 GENMASK(30, 24) +#define FRAC_N GENMASK(23, 16) +#define M_PLL GENMASK(15, 8) +#define RESERVED1 GENMASK(7, 4) +#define RST_TIME GENMASK(3, 2) +#define SDRAM_DIV GENMASK(1, 0) +/* CLK_DIV_PARAM */ +#define PIX_DIV GENMASK(31, 24) +#define CAM_DIV GENMASK(23, 16) +#define CPU_DIV GENMASK(15, 8) +#define RESERVED2 GENMASK(7, 6) +#define PIX_DIV_VALID BIT(5) +#define PIX_SEL BIT(4) +#define CAM_DIV_VALID BIT(3) +#define CAM_SEL BIT(2) +#define CPU_DIV_VALID BIT(1) +#define CPU_SEL BIT(0) +/* CPU_THROT */ +#define CPU_THROT GENMASK(3, 0) + +static const struct clk_div_table sdram_div_table[] = { + {.val = 0, .div = 2}, + {.val = 1, .div = 4}, + {.val = 2, .div = 3}, + {.val = 3, .div = 3}, +}; + +static ulong ls1c300_clk_get_rate(struct clk *clk) +{ + struct clk *cl; + ulong rate; + int err; + + err = clk_get_by_id(clk->id, &cl); + if (err) + return err; + + rate = clk_get_rate(cl); + return rate; +} + +static int ls1c300_clk_enable(struct clk *clk) +{ + /* Nothing to do on Octeon */ + return 0; +} + +static const struct clk_ops ls1c300_clk_ops = { + .enable = ls1c300_clk_enable, + .get_rate = ls1c300_clk_get_rate, +}; + +static int ls1c300_clk_probe(struct udevice *dev) +{ + void __iomem *base; + void __iomem *cpu_throt; + void __iomem *addr; + + struct clk *cl, clk; + + int ret; + const char *parent_name; + unsigned int mult, div; + unsigned int val; + int flags; + + base = (void *)dev_remap_addr_index(dev, 0); +#define START_FREQ (0) +#define CLK_DIV_PARAM (4) + cpu_throt = (void *)dev_remap_addr_index(dev, 1); + + debug(" base: %p\n", base); + debug("cpu_throt: %p\n", cpu_throt); + + val = readl(base + START_FREQ); + debug(" START_FREQ: [%08x]\n", val); + val = readl(base + CLK_DIV_PARAM); + debug("CLK_DIV_PARAM: [%08x]\n", val); + + ret = clk_get_by_index(dev, 0, &clk); + if (ret) + return ret; + + ret = clk_get_rate(&clk); + + parent_name = clk.dev->name; + val = readl(base + START_FREQ); + mult = FIELD_GET(FRAC_N, val) + FIELD_GET(M_PLL, val); div = 4; + cl = clk_register_fixed_factor(NULL, "pll", parent_name, 0, mult, div); + clk_dm(CLK_PLL, cl); + + addr = base + CLK_DIV_PARAM; + flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO; + cl = clk_register_divider(NULL, "cpu_div", "pll", 0, addr, 8, 7, flags); + clk_dm(CLK_CPU, cl); + cl = clk_register_divider(NULL, "cam_div", "pll", 0, addr, 16, 7, flags); + clk_dm(CLK_CAMERA, cl); + cl = clk_register_divider(NULL, "pix_div", "pll", 0, addr, 24, 7, flags); + clk_dm(CLK_PIX, cl); + + mult = FIELD_GET(CPU_THROT, readl(cpu_throt)) + 1; div = 16; + cl = clk_register_fixed_factor(NULL, "cpu_throt_factor", "cpu_div", CLK_GET_RATE_NOCACHE, mult, div); + clk_dm(CLK_CPU_THROT, cl); + + addr = base + START_FREQ; + cl = clk_register_divider(NULL, "sdram_div", "cpu_div", 0, addr, 0, 2, 0); + to_clk_divider(cl)->table = sdram_div_table; + clk_dm(CLK_SDRAM, cl); + + return 0; +} + +static const struct udevice_id ls1c300_clk_ids[] = { + { .compatible = "loongson,ls1c300-clk" }, + { } +}; + +U_BOOT_DRIVER(ls1c300_clk) = { + .name = "ls1c300-clk", + .id = UCLASS_CLK, + .of_match = ls1c300_clk_ids, + .probe = ls1c300_clk_probe, + .priv_auto = sizeof(struct clk), + .ops = &ls1c300_clk_ops, +}; diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index f90f0ca02b..289b568188 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -167,6 +167,14 @@ config WDT_GPIO doc/device-tree-bindings/watchdog/gpio-wdt.txt for information on how to describe the watchdog in device tree. +config WDT_LSMIPS + bool "Loongson MIPS watchdog timer support" + depends on WDT + help + Select this to enable watchdog timer for Loongson SoCs. + The watchdog timer is stopped when initialized. + It performs full SoC reset. + config WDT_MPC8xx bool "MPC8xx watchdog timer support" depends on WDT && MPC8xx diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index a35bd559f5..cb596af904 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_WDT_CORTINA) += cortina_wdt.o obj-$(CONFIG_WDT_ORION) += orion_wdt.o obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o obj-$(CONFIG_WDT_GPIO) += gpio_wdt.o +obj-$(CONFIG_WDT_LSMIPS) += lsmips_wdt.o obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o obj-$(CONFIG_WDT_MT7620) += mt7620_wdt.o obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o diff --git a/drivers/watchdog/lsmips_wdt.c b/drivers/watchdog/lsmips_wdt.c new file mode 100644 index 0000000000..ef91cae349 --- /dev/null +++ b/drivers/watchdog/lsmips_wdt.c @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Watchdog driver for MediaTek SoCs + * + * Copyright (C) 2018 MediaTek Inc. + * Author: Ryder Lee <ryder....@mediatek.com> + * + * based on: drivers/watchdog/mtk_wdt.c + * Copyright (C) 2020-2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#include <common.h> +#include <dm.h> +#include <hang.h> +#include <wdt.h> +#include <asm/io.h> +#include <linux/bitops.h> +#include <clk.h> + +#define WDT_EN (priv->base + 0) +#define WDT_TIMER (priv->base + 4) +#define WDT_SET (priv->base + 8) + +struct lsmips_wdt_priv { + void __iomem *base; + ulong clock; + unsigned long timeout; +}; + +static int lsmips_wdt_reset(struct udevice *dev) +{ + struct lsmips_wdt_priv *priv = dev_get_priv(dev); + + writel(priv->timeout, WDT_TIMER); + writel(1, WDT_SET); + + return 0; +} + +static int lsmips_wdt_stop(struct udevice *dev) +{ + struct lsmips_wdt_priv *priv = dev_get_priv(dev); + + writel(0, WDT_EN); + return 0; +} + +static int lsmips_wdt_expire_now(struct udevice *dev, ulong flags) +{ + struct lsmips_wdt_priv *priv = dev_get_priv(dev); + + writel(1, WDT_EN); + writel(1, WDT_TIMER); + writel(1, WDT_SET); + + hang(); + return 0; +} + +static int lsmips_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) +{ + struct lsmips_wdt_priv *priv = dev_get_priv(dev); + unsigned int timeout; + + timeout = U32_MAX / (priv->clock / 1000); + + if (timeout < timeout_ms) + timeout = U32_MAX; + else + timeout = timeout_ms * (priv->clock / 1000); + + debug("WDT: reload = %08x\n", timeout); + + writel(1, WDT_EN); + writel(timeout, WDT_TIMER); + writel(1, WDT_SET); + + priv->timeout = timeout; + + return 0; +} + +static int lsmips_wdt_probe(struct udevice *dev) +{ + struct lsmips_wdt_priv *priv = dev_get_priv(dev); + struct clk cl; + + priv->base = dev_remap_addr(dev); + if (!priv->base) + return -ENOENT; + + if (clk_get_by_index(dev, 0, &cl) == 0) + priv->clock = clk_get_rate(&cl); + + if (priv->clock < 33000000 || priv->clock > 150000000) { + /* assume 67MHz by default */ + priv->clock = 67108864; + } + + debug("WDT: clock = %ld\n", priv->clock); + + writel(0, WDT_EN); + return 0; +} + +static const struct wdt_ops lsmips_wdt_ops = { + .start = lsmips_wdt_start, + .reset = lsmips_wdt_reset, + .stop = lsmips_wdt_stop, + .expire_now = lsmips_wdt_expire_now, +}; + +static const struct udevice_id lsmips_wdt_ids[] = { + { .compatible = "loongson,ls1c300-wdt"}, + {} +}; + +U_BOOT_DRIVER(lsmips_wdt) = { + .name = "lsmips_wdt", + .id = UCLASS_WDT, + .of_match = lsmips_wdt_ids, + .priv_auto = sizeof(struct lsmips_wdt_priv), + .probe = lsmips_wdt_probe, + .ops = &lsmips_wdt_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/include/configs/ls1c300.h b/include/configs/ls1c300.h new file mode 100644 index 0000000000..a96deb6bb2 --- /dev/null +++ b/include/configs/ls1c300.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: Gao Weijie <weijie....@mediatek.com> + * based on: include/configs/mt7628.h + * Copyright (C) 2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#ifndef __CONFIG_LS1C300_H__ +#define __CONFIG_LS1C300_H__ + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_LOAD_ADDR 0x80010000 + +#define CONFIG_SYS_INIT_SP_OFFSET 0x80000 + +#define CONFIG_SYS_BOOTM_LEN 0x1000000 + +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_CBSIZE 1024 + +/* Serial SPL */ +#define CONFIG_SYS_NS16550_SERIAL +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) +#define CONFIG_SYS_NS16550_CLK 66000000 +#define CONFIG_SYS_NS16550_REG_SIZE (-1) +#define CONFIG_SYS_NS16550_COM1 0xbfe44000 +#define CONFIG_SYS_NS16550_COM2 0xbfe48000 +#define CONFIG_SYS_NS16550_COM3 0xbfe4c000 +#define CONFIG_SYS_NS16550_COM4 0xbfe4c400 +#define CONFIG_SYS_NS16550_COM5 0xbfe4c500 +#define CONFIG_SYS_NS16550_COM6 0xbfe4c600 +#endif + +/* Serial common */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 } + +/* SPL */ +#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SPL_BSS_START_ADDR 0x80010000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x10000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_PAD_TO 0 + +#define CONFIG_MALLOC_F_ADDR 0x80100000 /* FIXME: find a proper place */ + +/* Dummy value */ +#define CONFIG_SYS_UBOOT_BASE 0 + +#endif /* __CONFIG_LS1C300_H__ */ diff --git a/include/dt-bindings/clock/ls1c300-clk.h b/include/dt-bindings/clock/ls1c300-clk.h new file mode 100644 index 0000000000..735fa61789 --- /dev/null +++ b/include/dt-bindings/clock/ls1c300-clk.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2022 Du Huanpeng <d...@hodcarrier.org> + */ + +#ifndef __DT_BINDINGS_LS1C300_CLK_H__ +#define __DT_BINDINGS_LS1C300_CLK_H__ + +/* Base clocks */ +#define CLK_XTAL 0 +#define CLK_PLL 1 +#define CLK_CPU 2 +#define CLK_CPU_THROT 7 +#define CLK_SDRAM 3 + +#define CLK_CAMERA 4 +#define CLK_DC 5 +#define CLK_PIX 5 +#define CLK_AXIMUX 6 + +/* Peripheral clocks */ +#define CLK_UART0 3 +#define CLK_UART1 3 +#define CLK_UART2 3 +#define CLK_UART3 3 +#define CLK_UART4 3 +#define CLK_UART5 3 +#define CLK_UART6 3 +#define CLK_UART7 3 +#define CLK_UART8 3 +#define CLK_UART9 3 +#define CLK_UART10 3 +#define CLK_UART11 3 +#define CLK_CAN0 3 +#define CLK_CAN1 3 +#define CLK_I2C0 3 +#define CLK_PWM 3 +#define CLK_I2S 3 +#define CLK_RTC 3 +#define CLK_I2C1 3 +#define CLK_SDIO 3 +#define CLK_I2C2 3 +#define CLK_ADC 3 +#define CLK_NAND 3 + +#define CLK_WDT 3 + +#endif /* __DT_BINDINGS_LS1C300_CLK_H__ */ -- 2.25.1
