Commit 0934dddc6436 ("arm: a37xx: Update DTS files to version from
upstream Linux kernel") ported Linux's device-tree files for Armada 3720
SOCs. This broke SPI support on some Espressobin boards and results in
following U-Boot error:
Loading Environment from SPIFlash... jedec_spi_nor flash@0: unrecognized
JEDEC id bytes: f7, 30, 0b
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
Before that commit DT node for SPI was called 'spi-flash@0' and after
that commit it is called 'flash@0'. Before that commit 'spi-max-frequency'
was set to 50000000 and after it is 104000000.
Rename DT node 'spi-flash@0 in armada-3720-espressobin-u-boot.dtsi to
'flash@0' and set custom U-Boot 'spi-max-frequency' back to 50000000.
With this change SPI is working on Espressobin again and it is detected
with JEDEC ids ef, 60, 16 on our tested unit.
Loading Environment from SPIFlash... SF: Detected w25q32dw with page size 256
Bytes, erase size 4 KiB, total 4 MiB
OK
Note that it is unknown why spi-max-frequency with value 104000000 does not
work in U-Boot as it works fine with Linux kernel. Also note that in
defconfig file configs/mvebu_espressobin-88f3720_defconfig is set option
CONFIG_SF_DEFAULT_SPEED=40000000 which is different value than in DT.
Fixes: 0934dddc6436 ("arm: a37xx: Update DTS files to version from upstream
Linux kernel")
Signed-off-by: Pali Rohár <p...@kernel.org>
---
Hello Stefan, like with USB3.0 port on Turris MOX, this is SPI
regression on Espressobin in U-Boot 2022.04. Could you send this fix to
master to have SPI working in U-Boot 2022.04? I do not know what is wrong
with SPI frequency and we have different value in defconfig and
different value in DTS file and another value in kernel DTS file. So the
best for now is to stick with old value which was used in U-Boot.
I have tested also Turris MOX with current U-Boot from master branch and
it does not have any issue with SPI, like Espressobin.
---
arch/arm/dts/armada-3720-espressobin-u-boot.dtsi | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/armada-3720-espressobin-u-boot.dtsi
b/arch/arm/dts/armada-3720-espressobin-u-boot.dtsi
index 3e01c64a4bdb..2ffdc65e9f47 100644
--- a/arch/arm/dts/armada-3720-espressobin-u-boot.dtsi
+++ b/arch/arm/dts/armada-3720-espressobin-u-boot.dtsi
@@ -1,8 +1,15 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
&spi0 {
- spi-flash@0 {
+ flash@0 {
+ /*
+ * For some unknown reason U-Boot SPI driver cannot access
+ * SPI-NOR with higher frequency. Linux kernel SPI driver
+ * does not have this problem.
+ */
+ spi-max-frequency = <50000000>;
+
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
@@ -19,8 +26,8 @@
};
};
};
-};
#endif
+};
/*
* U-Boot requires to have this eMMC node by default in "okay" status. U-Boot
--
2.20.1
