cp.b is used a lot as a way to load binaries to memory and execute them, however we may need to integrate this with the efi subsystem to set it up as a bootdev.
So, introduce a loadm command that will be consistent with the other loadX commands and will call the efi API's. ex: loadm $kernel_addr $kernel_addr_r $kernel_size with this a kernel with CONFIG_EFI_STUB enabled will be loaded and then subsequently booted with bootefi command. Signed-off-by: Rui Miguel Silva <[email protected]> --- README | 1 + cmd/Kconfig | 6 ++++ cmd/bootefi.c | 12 ++++++++ cmd/load.c | 48 ++++++++++++++++++++++++++++++++ include/efi_loader.h | 2 ++ lib/efi_loader/efi_device_path.c | 9 ++++++ 6 files changed, 78 insertions(+) diff --git a/README b/README index fe3ba01865e6..2932734b3edc 100644 --- a/README +++ b/README @@ -2693,6 +2693,7 @@ rarpboot- boot image via network using RARP/TFTP protocol diskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd' loads - load S-Record file over serial line loadb - load binary file over serial line (kermit mode) +loadm - load binary blob from source address to destination address md - memory display mm - memory modify (auto-incrementing) nm - memory modify (constant address) diff --git a/cmd/Kconfig b/cmd/Kconfig index 564daa7bbc8d..d70e8398a558 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1076,6 +1076,12 @@ config CMD_LOADB help Load a binary file over serial line. +config CMD_LOADM + bool "loadm" + default y + help + Load a binary over memory mapped. + config CMD_LOADS bool "loads" default y diff --git a/cmd/bootefi.c b/cmd/bootefi.c index 46eebd5ee225..64fe170bc3d6 100644 --- a/cmd/bootefi.c +++ b/cmd/bootefi.c @@ -34,6 +34,18 @@ static struct efi_device_path *bootefi_device_path; static void *image_addr; static size_t image_size; +/** + * efi_get_image_parameters() - return image parameters + * + * @img_addr: address of loaded image in memory + * @img_size: size of loaded image + */ +void efi_get_image_parameters(void **img_addr, size_t *img_size) +{ + *img_addr = image_addr; + *img_size = image_size; +} + /** * efi_clear_bootdev() - clear boot device */ diff --git a/cmd/load.c b/cmd/load.c index 7e4a552d90ef..1224a7f85bb3 100644 --- a/cmd/load.c +++ b/cmd/load.c @@ -1063,6 +1063,44 @@ static ulong load_serial_ymodem(ulong offset, int mode) #endif +#if defined(CONFIG_CMD_LOADM) +static int do_load_memory_bin(struct cmd_tbl *cmdtp, int flag, int argc, + char *const argv[]) +{ + ulong addr, dest, size; + void *src, *dst; + + if (argc != 4) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[1], NULL, 16); + + dest = simple_strtoul(argv[2], NULL, 16); + + size = simple_strtoul(argv[3], NULL, 16); + + if (!size) { + printf("loadm: can not load zero bytes\n"); + return 1; + } + + src = map_sysmem(addr, size); + dst = map_sysmem(dest, size); + + memcpy(dst, src, size); + + unmap_sysmem(src); + unmap_sysmem(dst); + + if (IS_ENABLED(CONFIG_CMD_BOOTEFI)) + efi_set_bootdev("Mem", "", "", map_sysmem(dest, 0), size); + + printf("loaded bin to memory: size: %lu\n", size); + + return 0; +} +#endif + /* -------------------------------------------------------------------- */ #if defined(CONFIG_CMD_LOADS) @@ -1137,3 +1175,13 @@ U_BOOT_CMD( ); #endif /* CONFIG_CMD_LOADB */ + +#if defined(CONFIG_CMD_LOADM) +U_BOOT_CMD( + loadm, 4, 0, do_load_memory_bin, + "load binary blob from source address to destination address", + "[src_addr] [dst_addr] [size]\n" + " - load a binary blob from one memory location to other" + " from src_addr to dst_addr by size bytes" +); +#endif /* CONFIG_CMD_LOADM */ diff --git a/include/efi_loader.h b/include/efi_loader.h index 110d8ae79cca..8d199db18ff2 100644 --- a/include/efi_loader.h +++ b/include/efi_loader.h @@ -585,6 +585,8 @@ efi_status_t efi_load_pe(struct efi_loaded_image_obj *handle, void efi_save_gd(void); /* Call this to relocate the runtime section to an address space */ void efi_runtime_relocate(ulong offset, struct efi_mem_desc *map); +/* Call this to get image parameters */ +void efi_get_image_parameters(void **img_addr, size_t *img_size); /* Add a new object to the object list. */ void efi_add_handle(efi_handle_t obj); /* Create handle */ diff --git a/lib/efi_loader/efi_device_path.c b/lib/efi_loader/efi_device_path.c index dc787b4d3dde..707d5e043d3d 100644 --- a/lib/efi_loader/efi_device_path.c +++ b/lib/efi_loader/efi_device_path.c @@ -1112,6 +1112,8 @@ efi_status_t efi_dp_from_name(const char *dev, const char *devnr, { struct blk_desc *desc = NULL; struct disk_partition fs_partition; + size_t image_size; + void *image_addr; int part = 0; char *filename; char *s; @@ -1127,6 +1129,13 @@ efi_status_t efi_dp_from_name(const char *dev, const char *devnr, } else if (!strcmp(dev, "Uart")) { if (device) *device = efi_dp_from_uart(); + } else if (!strcmp(dev, "Mem")) { + efi_get_image_parameters(&image_addr, &image_size); + + if (device) + *device = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE, + (uintptr_t)image_addr, + image_size); } else { part = blk_get_device_part_str(dev, devnr, &desc, &fs_partition, 1); -- 2.35.1
