Hi Michael, >HI Tom > >On Sat, Mar 19, 2022 at 6:51 PM Tom Rini <tr...@konsulko.com> wrote: >> >> On Sat, Mar 19, 2022 at 06:49:25PM +0100, Michael Nazzareno Trimarchi wrote: >> > HI Tom >> > >> > On Sat, Mar 19, 2022 at 6:44 PM Tom Rini <tr...@konsulko.com> wrote: >> > > >> > > On Sat, Mar 19, 2022 at 06:37:18PM +0100, Michael Nazzareno Trimarchi >> > > wrote: >> > > > Hi Tom >> > > > >> > > > On Sat, Mar 19, 2022 at 6:30 PM Tom Rini <tr...@konsulko.com> wrote: >> > > > > >> > > > > On Sat, Mar 19, 2022 at 06:27:38PM +0100, Michael Nazzareno >> > > > > Trimarchi wrote: >> > > > > > Hi >> > > > > > >> > > > > > On Sat, Mar 19, 2022 at 6:25 PM Tom Rini <tr...@konsulko.com> >> > > > > > wrote: >> > > > > > > >> > > > > > > On Sat, Mar 19, 2022 at 06:08:18PM +0100, Michael Nazzareno >> > > > > > > Trimarchi wrote: >> > > > > > > > Hi Tom >>> > > > > > > > >>> > > > > > > > On Sat, Mar 19, 2022 at 6:03 PM Tom Rini <tr...@konsulko.com> >>> > > > > > > > wrote: >>> > > > > > > > > >>>> > > > > > > > > On Sat, Mar 19, 2022 at 05:48:59PM +0100, Michael >>>> > > > > > > > > Nazzareno Trimarchi wrote: >>>> > > > > > > > > > Hi Tom >>> > > > > > > > > > >>> > > > > > > > > > On Sat, Mar 19, 2022 at 5:05 PM Tom Rini >>> > > > > > > > > > <tr...@konsulko.com> wrote: >> > > > > > > > > > > >> > > > > > > > > > > On Sat, Mar 19, 2022 at 02:51:01PM +0100, Michael >> > > > > > > > > > > Nazzareno Trimarchi wrote: >> > > > > > > > > > > > Hi >> > > > > > > > > > > > >> > > > > > > > > > > > On Sat, Mar 19, 2022 at 2:25 PM Fabio Estevam >> > > > > > > > > > > > <feste...@gmail.com> wrote: >> > > > > > > > > > > > > >> > > > > > > > > > > > > Hi Michael, >> > > > > > > > > > > > > >> > > > > > > > > > > > > On Sat, Mar 19, 2022 at 6:47 AM Michael Nazzareno >> > > > > > > > > > > > > Trimarchi >> > > > > > > > > > > > > <mich...@amarulasolutions.com> wrote: >> > > > > > > > > > > > > > >> > > > > > > > > > > > > > HI >> > > > > > > > > > > > > > >> > > > > > > > > > > > > > Please send me a link to apply your series >> > > > > > > > > > > > > >> > > > > > > > > > > > > You can get the series from patchwork (just click in >> > > > > > > > > > > > > the 'series' button) >> > > > > > > > > > > > > https://eur01.safelinks.protection.outlook.com/?>url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fuboot%2Fpatch%2F20220112133127.16880-2->gaurav.jain%40nxp.com%2F&data=04%7C01%7Craffaele.recalcati%40bticino.it%7Cd7b85983151448602>62808da09d260da%7C199686b5bef4496087867a6b1888fee3%7C1%7C0%7C637833096424290979%7CUnkn>own%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C30>00&sdata=cLvLVUDGQzJ7VTyzBrTqOeobl0lgBOxJtmhV2RMjvB0%3D&reserved=0<https://eur01.safelinks.protection.outlook.com/?>url=https%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fuboot%2Fpatch%2F20220112133127.16880-2-gaurav.jain%40nxp.com%2F&data=04%7C01%7Craffaele.recalcati%40bticino.it%7Cd7b8598315144860262808da09d260da%7C199686b5bef4496087867a6b1888fee3%7C1%7C0%7C637833096424290979%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=cLvLVUDGQzJ7VTyzBrTqOeobl0lgBOxJtmhV2RMjvB0%3D&reserved=0> >> > > > > > > > > > > > >> > > > > > > > > > > > Done, well, I have tried remove DM_GPIO in SPL. Seems >> > > > > > > > > > > > that I need to >> > > > > > > > > > > > remove a lot of features. I have tested LTO build but >> > > > > > > > > > > > size >> > > > > > > > > > > > of SPL increase. Is that strange? >> > > > > > > > > > > >> > > > > > > > > > > That is very strange. Can you post your patches >> > > > > > > > > > > somewhere? >> > > > > > > > > > > >> > > > > > > > > > > -- >> > > > > > > > > > > Tom >> > > > > > > > > > >> > > > > > > > > > Start from here 9776c4e9d00ac49d6388ffe9e084ff03b37ae479 >> > > > > > > > > > export ARCH=arm >> > > > > > > > > > export CROSS_COMPILE=arm-linux-gnueabihf- >> > > > > > > > > > >> > > > > > > > > > make imx6dl_mamoj_defconfig >> > > > > > > > > > build it >> > > > > > > > > > >> > > > > > > > > > Try then to enable LTO and build it again >> > > > > > > > > > >> > > > > > > > > > spl/u-boot-spl.bin exceeds file size limit: >> > > > > > > > > > limit: 0xefa0 bytes >> > > > > > > > > > actual: 0xf071 bytes >> > > > > > > > > > excess: 0xd1 bytes >> > > > > > > > > > >> > > > > > > > > > So LTO does not help even on beginning on this board. You >> > > > > > > > > > don't need >> > > > > > > > > > to apply any patch for this test >> > > > > > > > > >> > > > > > > > > I think that's some artifact of mixing LTO/non-LTO and the >> > > > > > > > > world not >> > > > > > > > > getting rebuilt? Just enabling LTO after the defconfig >> > > > > > > > > works fine and >> > > > > > > > > is smaller than before. >> > > > > > > > >> > > > > > > > In order to save space I did not change what we have. Every >> > > > > > > > build starts from >> > > > > > > > a mrproper and new configuration. I can not mix LTO/non-LTO in >> > > > > > > > this case. I'm >> > > > > > > > using upstream defconfig and upstream defconfig + LTO enabled >> > > > > > > > and the result is >> > > > > > > > that spl increase in size for LTO building. I'm working to >> > > > > > > > keep out >> > > > > > > > part that are not really needed but >> > > > > > > > I was hoping that LTO give me some help here >> > > > > > > >> > > > > > > Yes, LTO saves about 5KiB on the SPL binary. You just need to >> > > > > > > enable it >> > > > > > > in the config before you start building, not after you've built >> > > > > > > everything once. >> > > > > > >> > > > > > Offcourse ;) but this not the case. I don't drink enough to think >> > > > > > that >> > > > > > change a config, decrease the build size ;) >> > > > > >> > > > > LTO is an entirely different way of the compiler / linker optimizing >> > > > > the >> > > > > binary. So yes, in this case enabling a single option decreases the >> > > > > size. >> > > > >> > > > >> > > > I think we are in a circle. Let's have the result with LTO >> > > > >> > > > spl/keep-syms-lto.c >> > > > ( cd spl && arm-linux-gnueabihf-gcc -nostdlib -nostartfiles >> > > > -fuse-linker-plugin -flto=8 -Wall -Wstrict-prototypes >> > > > -Wno-format-security -fno-builtin -ffreestanding -std=gnu11 >> > > > -fshort-wchar -fno-strict-aliasing -fno-PIE -Os -flto=8 >> > > > -fno-stack-protector -fno-delete-null-pointer-checks -Wno-pointer-sign >> > > > -Wno-stringop-truncation -Wno-array-bounds -Wno-stringop-overflow >> > > > -Wno-maybe-uninitialized -fmacro-prefix-map=./= -g -fstack-usage >> > > > -Wno-format-nonliteral -Wno-address-of-packed-member >> > > > -Wno-unused-but-set-variable -Werror=date-time -Wno-packed-not-aligned >> > > > -ffunction-sections -fdata-sections -fno-stack-protector -D__KERNEL__ >> > > > -D__UBOOT__ -DCONFIG_SPL_BUILD -D__ARM__ -Wa,-mimplicit-it=always >> > > > -mthumb -mthumb-interwork -mabi=aapcs-linux -mno-unaligned-access >> > > > -fno-common -ffixed-r9 -msoft-float -mgeneral-regs-only -pipe >> > > > -march=armv7-a -D__LINUX_ARM_ARCH__=7 -mtune=generic-armv7-a >> > > > -Ispl/include -Iinclude -I./arch/arm/include -include >> > > > ./include/linux/kconfig.h -nostdinc -isystem >> > > > /usr/lib/gcc-cross/arm-linux-gnueabihf/9/include -Wl,-T >> > > > -Wl,u-boot-spl.lds -Wl,-Bstatic -Wl,--gc-sections >> > > > -Wl,--no-dynamic-linker -Wl,--build-id=none -Wl,-Ttext -Wl,0x00908000 >> > > > arch/arm/cpu/armv7/start.o -Wl,--whole-archive >> > > > arch/arm/cpu/armv7/built-in.o arch/arm/cpu/built-in.o >> > > > arch/arm/lib/built-in.o arch/arm/mach-imx/built-in.o >> > > > board/bticino/mamoj/built-in.o common/spl/built-in.o >> > > > common/init/built-in.o boot/built-in.o common/built-in.o >> > > > cmd/built-in.o env/built-in.o lib/built-in.o disk/built-in.o >> > > > drivers/built-in.o drivers/usb/dwc3/built-in.o >> > > > drivers/usb/cdns3/built-in.o dts/built-in.o fs/built-in.o >> > > > keep-syms-lto.o arch/arm/lib/eabi_compat.o arch/arm/lib/lib.a >> > > > -Wl,--no-whole-archive -Wl,-Map,u-boot-spl.map -o u-boot-spl ) >> > > > arm-linux-gnueabihf-objcopy -j .text -j .secure_text -j >> > > > .secure_data -j .rodata -j .hash -j .data -j .got -j .got.plt -j >> > > > .u_boot_list -j .rel.dyn -j .binman_sym_table -j .text_rest -j >> > > > .dtb.init.rodata -j .efi_runtime -j .efi_runtime_rel -O binary >> > > > spl/u-boot-spl spl/u-boot-spl-nodtb.bin >> > > > arm-linux-gnueabihf-objdump -t spl/u-boot-spl > spl/u-boot-spl.sym >> > > > cat spl/u-boot-spl-nodtb.bin spl/u-boot-spl.dtb > >> > > > spl/u-boot-spl-dtb.bin >> > > > cp spl/u-boot-spl-dtb.bin spl/u-boot-spl.bin >> > > > spl/u-boot-spl.bin exceeds file size limit: >> > > > limit: 0xefa0 bytes >> > > > actual: 0xf079 bytes >> > > > excess: 0xd9 bytes >> > > > make: *** [Makefile:2082: spl/u-boot-spl.bin] Error 1 >> > > > make: *** Deleting file 'spl/u-boot-spl.bin' >> > > > >> > > > and without >> > > > >> > > > NUX_ARM_ARCH__=7 -mtune=generic-armv7-a -D__ASSEMBLY__ -x c -o >> > > > spl/u-boot-spl.cfgout arch/arm/mach-imx/spl_sd.cfg >> > > > ./tools/mkimage -n spl/u-boot-spl.cfgout -T imximage -e 0x00908000 >> > > > -d spl/u-boot-spl.bin SPL >SPL.log && cat SPL.log >> > > > Image Type: Freescale IMX Boot Image >> > > > Image Ver: 2 (i.MX53/6/7 compatible) >> > > > Mode: DCD >> > > > Data Size: 73824 Bytes = 72.09 KiB = 0.07 MiB >> > > > Load Address: 00907420 >> > > > Entry Point: 00908000 >> > > > HAB Blocks: 0x00907400 0x00000000 0x0000fc00 >> > > > DCD Blocks: 0x00910000 0x0000002c 0x00000004 >> > > > make -f ./scripts/Makefile.build obj=arch/arm/mach-imx >> > > > u-boot-with-spl.imx >> > > > mkdir -p spl/ >> > > > ./tools/mkimage -n spl/u-boot-spl.cfgout -T imximage -e 0x00908000 >> > > > -d spl/u-boot-spl.bin SPL >SPL.log && cat SPL.log >> > > > Image Type: Freescale IMX Boot Image >> > > > Image Ver: 2 (i.MX53/6/7 compatible) >> > > > Mode: DCD >> > > > Data Size: 73824 Bytes = 72.09 KiB = 0.07 MiB >> > > > Load Address: 00907420 >> > > > Entry Point: 00908000 >> > > > HAB Blocks: 0x00907400 0x00000000 0x0000fc00 >> > > > DCD Blocks: 0x00910000 0x0000002c 0x00000004 >> > > > arm-linux-gnueabihf-objcopy -j .text -j .secure_text -j >> > > > .secure_data -j .rodata -j .hash -j .data -j .got -j .got.plt -j >> > > > .u_boot_list -j .rel.dyn -j .binman_sym_table -j .text_rest -j >> > > > .dtb.init.rodata -j .efi_runtime -j .efi_runtime_rel -I binary -O >> > > > binary --pad-to=0x11000 SPL u-boot-with-spl.imx && cat u-boot.img >> >> > > > u-boot-with-spl.imx || rm -f u-boot-with-spl.imx >> > > > >> > > > >> > > > What I'm trying to say is that I have followed the correct steps and >> > > > this is the LTO change >> > > > >> > > > git diff >> > > > diff --git a/configs/imx6dl_mamoj_defconfig >> > > > b/configs/imx6dl_mamoj_defconfig >> > > > index ae27857e6f..4a535012b2 100644 >> > > > --- a/configs/imx6dl_mamoj_defconfig >> > > > +++ b/configs/imx6dl_mamoj_defconfig >> > > > @@ -14,6 +14,7 @@ CONFIG_SPL_TEXT_BASE=0x00908000 >> > > > CONFIG_SPL_DRIVERS_MISC=y >> > > > CONFIG_IMX_HAB=y >> > > > # CONFIG_CMD_BMODE is not set >> > > > +CONFIG_LTO=y >> > > > CONFIG_DISTRO_DEFAULTS=y >> > > > CONFIG_BOOTDELAY=3 >> > > > CONFIG_SPL_OS_BOOT=y >> > > >> > > Here's what I see: >> > > $ git describe HEAD >> > > v2022.04-rc4-50-g9776c4e9d00a >> > > $ make imx6dl_mamoj_defconfig >> > > HOSTCC scripts/basic/fixdep >> > > HOSTCC scripts/kconfig/conf.o >> > > YACC scripts/kconfig/zconf.tab.c >> > > LEX scripts/kconfig/zconf.lex.c >> > > HOSTCC scripts/kconfig/zconf.tab.o >> > > HOSTLD scripts/kconfig/conf >> > > # >> > > # configuration written to .config >> > > # >> > > $ sed -i -e 's/# CONFIG_LTO is not set/CONFIG_LTO=y/' .config >> > > $ grep LTO .config >> > > CONFIG_ARCH_SUPPORTS_LTO=y >> > > CONFIG_LTO=y >> > > $ make >> > > CROSS_COMPILE=~/.buildman-toolchains/gcc-11.1.0-nolibc/arm-linux-gnueabi/bin/arm-l> >linux-gnueabi- -sj12 >> > > ===================== WARNING ====================== >> > > This board does not use CONFIG_DM_SERIAL (Driver Model >> > > for Serial drivers). Please update the board to use >> > > CONFIG_DM_SERIAL before the v2023.04 release. Failure to >> > > update by the deadline may result in board removal. >> > > See doc/driver-model/migration.rst for more info. >> > > ==================================================== >> > > arch/arm/dts/imx6dl-dhcom-pdk2.dtb: Warning (pwms_property): >> > > /display-bl:pwms: cell 3 is not a >phandle reference >> > > arch/arm/dts/imx6dl-dhcom-pdk2.dtb: Warning (pwms_property): >> > > /display-bl: Missing property '#pwm-cells' in node >> > > /soc/bus@2000000/gpc@20dc000 or bad phandle (referred from pwms[3]) >> > > arch/arm/dts/imx6q-dhcom-pdk2.dtb: Warning (pwms_property): >> > > /display-bl:pwms: cell 3 is not a phandle reference >> > > arch/arm/dts/imx6q-dhcom-pdk2.dtb: Warning (pwms_property): /display-bl: >> > > Missing property '>#pwm-cells' in node /soc/bus@2000000/gpc@20dc000 or >> > > bad phandle (referred from pwms[3]) >> > > $ ls -lh spl/u-boot-spl* > >> > -rwxrwxr-x 1 trini trini 944K Mar 19 13:40 spl/u-boot-spl > >> > -rw-rw-r-- 1 trini trini 54K Mar 19 13:40 spl/u-boot-spl.bin > >> > -rw-rw-r-- 1 trini trini 1.6K Mar 19 13:40 spl/u-boot-spl.cfgout > >> > -rw-rw-r-- 1 trini trini 2.2K Mar 19 13:40 spl/u-boot-spl.dtb > >> > -rw-rw-r-- 1 trini trini 54K Mar 19 13:40 spl/u-boot-spl-dtb.bin > >> > -rw-rw-r-- 1 trini trini 728 Mar 19 13:40 spl/u-boot-spl.lds > >> > -rw-rw-r-- 1 trini trini 5.9K Mar 19 13:40 > >> > spl/u-boot-spl.ltrans0.ltrans.su > >> > -rw-rw-r-- 1 trini trini 7.2K Mar 19 13:40 > >> > spl/u-boot-spl.ltrans1.ltrans.su > >> > -rw-rw-r-- 1 trini trini 182K Mar 19 13:40 spl/u-boot-spl.map > >> > -rwxrwxr-x 1 trini trini 51K Mar 19 13:40 spl/u-boot-spl-nodtb.bin >> > > -rw-rw-r-- 1 trini trini 135K Mar 19 13:40 spl/u-boot-spl.sym >> > > >> > >> > The only difference is the toolchain gcc version 9.4.0 (Ubuntu >> > 9.4.0-1ubuntu1~20.04) and for the result you get I'm agree with you. >> >> Yeah, that's too old of a toolchain for LTO to be usable. A patch to >> catch and error out in that case would be good :) > >Let's do it this way. I will test with the newer gcc version and >decrease the size and send a patch. >This can be done on Monday, because I don't have access to it. > >Michael
I can test on the board if needed. Let me know. > > -- > Tom -- Michael Nazzareno Trimarchi Co-Founder & Chief Executive Officer M. +39 347 913 2170 mich...@amarulasolutions.com __________________________________ Amarula Solutions BV Joop Geesinkweg 125, 1114 AB, Amsterdam, NL T. +31 (0)85 111 9172 i...@amarulasolutions.com https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.amarulasolutions.com%2F&data=04%7C01%7Craffaele.recalcati%40bticino.it%7Cd7b8598315144860262808da09d260da%7C199686b5bef4496087867a6b1888fee3%7C1%7C0%7C637833096424290979%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=6zWfMb%2Bt6h3CDq2Ktm4l3WRr24KqfP%2BaAMlNb%2F4xsxM%3D&reserved=0 ________________________________ Ce message, ainsi que tous les fichiers joints à ce message, peuvent contenir des informations sensibles et/ ou confidentielles ne devant pas être divulguées. Si vous n'êtes pas le destinataire de ce message (ou que vous recevez ce message par erreur), nous vous remercions de le notifier immédiatement à son expéditeur, et de détruire ce message. Toute copie, divulgation, modification, utilisation ou diffusion, non autorisée, directe ou indirecte, de tout ou partie de ce message, est strictement interdite. This e-mail, and any document attached hereby, may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized, direct or indirect, copying, disclosure, distribution or other use of the material or parts thereof is strictly forbidden.
