Commit 5bc4cd05d7d4 ("sunxi: move non-essential code out of s_init()")
moved the call to eth_init_board() from s_init() into board_init_f().
This means it's now only called from the SPL, which makes sense for
most of the other moved low-level functions. However the GMAC pinmux and
clock setup in eth_init_board() was not happy about that, so it broke
the sun7i GMAC.
Since Ethernet is of no use in the SPL anyway, just move the call into
board_init(), which is only run in U-Boot proper.
This fixes Ethernet operation for the A20 SoCs, which broke in
v2022.04-rc1, with the above mentioned commit.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
arch/arm/mach-sunxi/board.c | 1 -
board/sunxi/board.c | 3 +++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 0071de19ffd..9a7673d82dc 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -333,7 +333,6 @@ void board_init_f(ulong dummy)
clock_init();
timer_init();
gpio_init();
- eth_init_board();
spl_init();
preloader_console_init();
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index a0961590479..28f702bc296 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -30,6 +30,7 @@
#include <asm/arch/prcm.h>
#include <asm/arch/pmic_bus.h>
#include <asm/arch/spl.h>
+#include <asm/arch/sys_proto.h>
#include <asm/global_data.h>
#include <linux/delay.h>
#include <u-boot/crc.h>
@@ -308,6 +309,8 @@ int board_init(void)
#endif
#endif /* CONFIG_DM_MMC */
+ eth_init_board();
+
return 0;
}
--
2.35.1
