Hi Angus, Am Di., 15. März 2022 um 14:09 Uhr schrieb Angus Ainslie <an...@akkea.ca>:
> This is a DM clock driver based off the imx8mm u-boot driver and the linux > kernel driver. > > All of the PLLs and clocks are initialized so the subsystems below are > functional and tested. > > 1) USB host and peripheral > 2) ECSPI > 3) UART > 4) I2C all busses > 5) USDHC for eMMC support > 6) USB storage > 7) GPIO > 8) DRAM > > Signed-off-by: Angus Ainslie <an...@akkea.ca> > --- > drivers/clk/imx/Kconfig | 16 + > drivers/clk/imx/Makefile | 2 + > drivers/clk/imx/clk-imx8mq.c | 575 +++++++++++++++++++++++++++++++++++ > 3 files changed, 593 insertions(+) > create mode 100644 drivers/clk/imx/clk-imx8mq.c > > diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig > index cdd348020b0..06d8c1a5dd3 100644 > --- a/drivers/clk/imx/Kconfig > +++ b/drivers/clk/imx/Kconfig > @@ -71,6 +71,22 @@ config CLK_IMX8MP > help > This enables support clock driver for i.MX8MP platforms. > > +config SPL_CLK_IMX8MQ > + bool "SPL clock support for i.MX8MQ" > + depends on ARCH_IMX8M && SPL > + select SPL_CLK > + select SPL_CLK_CCF > you should select SPL_CLK_COMPOSITE_CCF ... > + help > + This enables SPL DM/DTS support for clock driver in i.MX8MQ > + > +config CLK_IMX8MQ > + bool "Clock support for i.MX8MQ" > + depends on ARCH_IMX8M > + select CLK > + select CLK_CCF > .. and select CLK_COMPOSITE_CCF here. > + help > + This enables support clock driver for i.MX8MQ platforms. > + > config SPL_CLK_IMXRT1020 > bool "SPL clock support for i.MXRT1020" > depends on ARCH_IMXRT && SPL > > [SNIP] -- Heiko
