On Sat, Feb 19, 2022 at 5:09 PM Adam Ford <aford...@gmail.com> wrote:
> With the NOP PHY driver available, it can support toggling the > GPIOS to handle coming out of reset. This series cleans up > the OMAP EHCI host driver, enables PHY support, and removes > the code to toggle the reset GPIO's. > > This series was tested on an OMAP3530, DM3730, and an AM3517. > Users of the omap4_panda, omap3_beagle, omap5_uevm, omap3_evm > are asked to test since I do not have that hardware available > to me and get_maintainer.pl doesn't list the owners of the > affected defconfig files. > > Adam Ford (7): > usb: ehci-omap: Drop dead code > usb: ehci-omap: Move omap_ehci_hcd_init to omap_ehci_probe > phy: nop-phy: Fix enabling reset > usb: ehci-omap: Make Kconfig select PHY if USB_EHCI_OMAP > usb: ehci-omap: Use PHY system to manage phy resets > usb: ehci-omap: Remove OMAP_EHCI_PHYx_RESET_GPIO from Kconfig > configs: omap various: Remove OMAP_EHCI_PHY from defconfigs > > arch/arm/include/asm/ehci-omap.h | 13 --- > configs/am3517_evm_defconfig | 2 - > configs/omap35_logic_somlv_defconfig | 2 - > configs/omap3_beagle_defconfig | 2 - > configs/omap3_logic_somlv_defconfig | 2 - > configs/omap4_panda_defconfig | 4 - > configs/omap5_uevm_defconfig | 4 - > drivers/phy/nop-phy.c | 5 +- > drivers/usb/host/Kconfig | 36 +------- > drivers/usb/host/ehci-omap.c | 126 +++++++++++++-------------- > 10 files changed, 66 insertions(+), 130 deletions(-) > > -- > 2.32.0 > > Works for me using 'omap3_beagle_defconfig' on Beagle Rev. C4 (3530) and Beagle xM (3730). Tested-by: Derald D. Woods <woods.techni...@gmail.com>
