Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.gra...@kococonnector.com>
Reviewed-by: Simon Glass <s...@chromium.org>
---
Changes for v2
- added imx8qm-u-boot.dtsi here to
- rebased on master
arch/arm/dts/imx8qm-cgtqmx8.dts | 1 +
arch/arm/dts/imx8qm-u-boot.dtsi | 133 ++++++++++++++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/congatec/cgtqmx8/imximage.cfg | 4 +-
configs/cgtqmx8_defconfig | 2 +-
doc/board/congatec/cgtqmx8.rst | 3 +-
6 files changed, 139 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/dts/imx8qm-u-boot.dtsi
diff --git a/arch/arm/dts/imx8qm-cgtqmx8.dts b/arch/arm/dts/imx8qm-cgtqmx8.dts
index 555c357f6f..919d00644f 100644
--- a/arch/arm/dts/imx8qm-cgtqmx8.dts
+++ b/arch/arm/dts/imx8qm-cgtqmx8.dts
@@ -12,6 +12,7 @@
/memreserve/ 0x80000000 0x00020000;
#include "fsl-imx8qm.dtsi"
+#include "imx8qm-u-boot.dtsi"
/ {
model = "Congatec QMX8 Qseven series";
diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
new file mode 100644
index 0000000000..5da420ece6
--- /dev/null
+++ b/arch/arm/dts/imx8qm-u-boot.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
+ };
+
+ spl {
+ filename = "spl.bin";
+
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8image -e
0x100000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
+
+ uboot_blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
+ };
+
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x00910000>;
+ load = <0x00091000>;
+ type = "firmware";
+
+ atf_blob {
+ filename = "bl31.bin";
+ type = "blob-ext";
+ };
+ };
+
+ scfw {
+ arch = "arm64";
+ compression = "none";
+ description = "System Controler
Firmware";
+ type = "firmware";
+
+ scfw_blob {
+ filename =
"mx8qm-val-scfw-tcm.bin";
+ type = "blob-ext";
+ };
+ };
+
+ seco {
+ arch = "arm64";
+ compression = "none";
+ description = "Seco Firmware";
+ type = "firmware";
+
+ seco_blob {
+ filename =
"mx8qm-ahab-container.img";
+ type = "blob-ext";
+ };
+ };
+
+ fdt {
+ filename = "imx8qm-rom7720-a1";
+ type = "flat_dt";
+ compression = "none";
+
+ uboot_fdt_blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+
+ conf {
+ filename = "imx8qm-rom7720-a1";
+ fdt = "fdt";
+ firmware = "uboot";
+ loadables = "atf";
+ };
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x0>;
+ type = "blob-ext";
+ };
+ };
+};
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index b43739e5c6..2646985cd0 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -75,6 +75,7 @@ config TARGET_IMX8QM_MEK
config TARGET_CONGA_QMX8
bool "Support congatec conga-QMX8 board"
+ select BINMAN
select BOARD_LATE_INIT
select SUPPORT_SPL
select IMX8QM
diff --git a/board/congatec/cgtqmx8/imximage.cfg
b/board/congatec/cgtqmx8/imximage.cfg
index 5ecde0c530..43035088e3 100644
--- a/board/congatec/cgtqmx8/imximage.cfg
+++ b/board/congatec/cgtqmx8/imximage.cfg
@@ -4,8 +4,8 @@
*/
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
+
/* SoC type IMX8QM */
SOC_TYPE IMX8QM
/* Append seco container image */
diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig
index 54b2d20c61..d02cc1b345 100644
--- a/configs/cgtqmx8_defconfig
+++ b/configs/cgtqmx8_defconfig
@@ -21,7 +21,7 @@ CONFIG_REMAKE_ELF=y
CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
diff --git a/doc/board/congatec/cgtqmx8.rst b/doc/board/congatec/cgtqmx8.rst
index bccdef2f16..16711a844d 100644
--- a/doc/board/congatec/cgtqmx8.rst
+++ b/doc/board/congatec/cgtqmx8.rst
@@ -57,8 +57,7 @@ Build U-Boot
$ export ATF_LOAD_ADDR=0x80000000
$ export BL33_LOAD_ADDR=0x80020000
$ make cgtqmx8_defconfig
- $ make u-boot.bin
- $ make flash.bin
+ $ make
Flash the binary into the SD card
---------------------------------
--
2.17.1
