Dear "Premi, Sanjeev", can you please quote onlye _relevant_ parts of previous messages? Thanks.
In message <b85a65d85d7eb246be421b3fb0fbb5930247a0a...@dbde02.ent.ti.com> you wrote: > > with 2009-q1 toolchain: > ----------------------- > busb_phy.o drivers/video/libvideo.o drivers/watchdog/libwatchdog.o > common/libcommon.o lib/libfdt/libfdt.o api/libapi.o post/libpost.o > arch/arm/cpu/armv7/omap-common/libomap-common.o board/ti/evm/libevm.o > --end-group /db/psp_git/users/a0756819/u-boot/arch/arm/lib/eabi_compat.o -L > /opt/codesourcery/2009q1-203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3 > -lgcc -Map u-boot.map -o u-boot > arm-none-linux-gnueabi-ld: section .bss [8003f5c0 -> 8007e31f] overlaps > section .rel.dyn [8003f5c0 -> 80044e4f] > arm-none-linux-gnueabi-ld: section .dynsym [80044e50 -> 80044eef] overlaps > section .bss [8003f5c0 -> 8007e31f] > arm-none-linux-gnueabi-ld: u-boot: section .bss vma 0x8003f5c0 overlaps > previous sections > make: *** [u-boot] Error 1 > > with 2010-q1 toolchain: > ----------------------- > mmon/libomap-common.o board/ti/evm/libevm.o --end-group > /db/psp_git/users/a0756819/u-boot/arch/arm/lib/eabi_compat.o -L > /opt/codesourcery/2010q1-202/bin/../lib/gcc/arm-none-linux-gnueabi/4.4.1/armv4t > -lgcc -Map u-boot.map -o u-boot > arm-none-linux-gnueabi-ld: u-boot: section .bss vma 0x8003e8e0 overlaps > previous sections > arm-none-linux-gnueabi-objcopy -O srec u-boot u-boot.srec > arm-none-linux-gnueabi-objcopy --gap-fill=0xff -O binary u-boot u-boot.bin Are you sure these are the only errors you see? Because for me, building for omap3_evm fails like this: start.S: Assembler messages: start.S:144: Error: constant expression expected -- `ldr sp,=((0x4020FFFC-CONFIG_SYS_GBL_DATA_SIZE))' make[1]: *** [/work/wd/tmp-arm/arch/arm/cpu/armv7/start.o] Error 1 make: *** [/work/wd/tmp-arm/arch/arm/cpu/armv7/start.o] Error 2 make: *** Waiting for unfinished jobs.... make: *** wait: No child processes. Stop. And this is a clear indication that the board support code has not been adapted yet (CONFIG_SYS_GBL_DATA_SIZE has been replaced by GENERATED_GBL_DATA_SIZE some time ago). Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de You said you didn't want to use CGI.pm, but methinks you are needlessly reinventing the wheel, one spoke at a time. Either you are masochistic, or you just haven't seen enough of what CGI.pm can do for you. -- Randal L. Schwartz in <8cyb81rg81....@gadget.cscaper.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
