ZYNQMP_PSU_INIT_ENABLED specifically saying that has connection to full U-Boot not SPL that's why build psu_spl_init for SPL all the time.
Also disable ZYNQMP_PSU_INIT_ENABLED because it ends up in situation that psu_init() is called twice which is wrong. By default only SPL should call it. Signed-off-by: Michal Simek <michal.si...@xilinx.com> --- arch/arm/mach-zynqmp/Makefile | 2 +- configs/xilinx_zynqmp_virt_defconfig | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile index eb6c5112b375..4f9f6b56a98a 100644 --- a/arch/arm/mach-zynqmp/Makefile +++ b/arch/arm/mach-zynqmp/Makefile @@ -6,6 +6,6 @@ obj-y += clk.o obj-y += cpu.o obj-$(CONFIG_MP) += mp.o -obj-$(CONFIG_SPL_BUILD) += spl.o handoff.o +obj-$(CONFIG_SPL_BUILD) += spl.o handoff.o psu_spl_init.o obj-$(CONFIG_SPL_ZYNQMP_DRAM_ECC_INIT) += ecc_spl_init.o obj-$(CONFIG_ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 9b1880867867..def7696b3d34 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -20,7 +20,6 @@ CONFIG_CMD_FRU=y CONFIG_PMUFW_INIT_FILE="/mnt/disk/som/pmufw.bin" CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE="/mnt/disk/u-boot/pmu_obj.bin" CONFIG_ZYNQMP_USB=y -CONFIG_ZYNQMP_PSU_INIT_ENABLED=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x8000000 -- 2.35.0
