Hello Andrew, This patch series are ok, Please help add Reviewed-by: Ryan Chen <ryan_c...@aspeedtech.com>
> -----Original Message----- > From: Andrew Jeffery <and...@aj.id.au> > Sent: Wednesday, February 16, 2022 7:57 AM > To: u-boot@lists.denx.de > Cc: max...@google.com; ChiaWei Wang <chiawei_w...@aspeedtech.com>; > Ryan Chen <ryan_c...@aspeedtech.com>; Troy Lee > <troy_...@aspeedtech.com>; BMC-SW <bmc...@aspeedtech.com>; > j...@jms.id.au; eaja...@linux.ibm.com > Subject: [PATCH 0/3] gpio: Add AST2[456]00 GPIO driver > > Hello, > > This series adds support for the GPIO controller found in Aspeed's AST2400, > AST2500 and AST2600 BMC SoCs. > > By and large I've just extracted the work from Aspeed's SDK and submitted it. > However, the driver as found in the SDK was in-turn extracted from Linux, cut > down and adapted to u-boot. I've adjusted the copyright to reflect this (as > found in Linux) after discussion with Troy and Ryan. > > From there I've polished the patch in accordance with checkpatch and done > some tweaks to improve consistency with the kernel driver (mainly the file > name). > > I've lightly tested the driver as-presented under qemu. That said, as the code > has been lifted from Aspeed's SDK (and in-turn from Linux) the implementation > has seen much wider testing. > > Please review! > > Andrew > > Andrew Jeffery (3): > gpio: Add Aspeed GPIO driver > ARM: dts: ast2500: Add ngpios property to GPIO node > configs: evb-ast2[56]00: Enable GPIO control > > arch/arm/dts/ast2500.dtsi | 1 + > configs/evb-ast2500_defconfig | 3 + > configs/evb-ast2600_defconfig | 3 + > drivers/gpio/Kconfig | 7 + > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-aspeed.c | 299 > ++++++++++++++++++++++++++++++++++ > 6 files changed, 314 insertions(+) > create mode 100644 drivers/gpio/gpio-aspeed.c > > -- > 2.32.0
