Hi Jan
On 2/15/22 14:00, Jan Kiszka wrote:
> On 15.02.22 12:56, Patrice CHOTARD wrote:
>> Hi Jan
>>
>> On 2/14/22 16:21, Jan Kiszka wrote:
>>> On 04.01.22 08:42, Patrice Chotard wrote:
>>>> When OF_LIVE flag is enabled on a 64 bits platform, there is an
>>>> issue when dev_read_addr() is called and need to perform an address
>>>> translation using __of_translate_address().
>>>>
>>>> In case of error, __of_translate_address() return's value is OF_BAD_ADDR
>>>> (wich is defined in include/dm/of.h to ((u64)-1) = 0xffffffffffffffff).
>>>> The return value of dev_read_addr() is often compared to FDT_ADDR_T_NONE
>>>> which is defined as (-1U) = 0xffffffff.
>>>> In this case the comparison is always false.
>>>>
>>>> To fix this issue, define FDT_ADDR_T_NONE to (ulong)(-1) in case of
>>>> AARCH64. Update accordingly related tests.
>>>>
>>>> Signed-off-by: Patrice Chotard <patrice.chot...@foss.st.com>
>>>>
>>>> ---
>>>>
>>>> Changes in v2:
>>>> - define FDT_ADDR_T_NONE as ((ulong)(-1)) and keep OF_BAD_ADDR unchanged
>>>>
>>>> include/fdtdec.h | 5 ++++-
>>>> test/dm/ofnode.c | 2 +-
>>>> test/dm/pci.c | 4 ++--
>>>> test/dm/test-fdt.c | 2 +-
>>>> 4 files changed, 8 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/include/fdtdec.h b/include/fdtdec.h
>>>> index 6c7ab887b2..e9e2916d6e 100644
>>>> --- a/include/fdtdec.h
>>>> +++ b/include/fdtdec.h
>>>> @@ -24,16 +24,19 @@
>>>> typedef phys_addr_t fdt_addr_t;
>>>> typedef phys_size_t fdt_size_t;
>>>>
>>>> -#define FDT_ADDR_T_NONE (-1U)
>>>> #define FDT_SIZE_T_NONE (-1U)
>>>>
>>>> #ifdef CONFIG_PHYS_64BIT
>>>> +#define FDT_ADDR_T_NONE ((ulong)(-1))
>>>> +
>>>> #define fdt_addr_to_cpu(reg) be64_to_cpu(reg)
>>>> #define fdt_size_to_cpu(reg) be64_to_cpu(reg)
>>>> #define cpu_to_fdt_addr(reg) cpu_to_be64(reg)
>>>> #define cpu_to_fdt_size(reg) cpu_to_be64(reg)
>>>> typedef fdt64_t fdt_val_t;
>>>> #else
>>>> +#define FDT_ADDR_T_NONE (-1U)
>>>> +
>>>> #define fdt_addr_to_cpu(reg) be32_to_cpu(reg)
>>>> #define fdt_size_to_cpu(reg) be32_to_cpu(reg)
>>>> #define cpu_to_fdt_addr(reg) cpu_to_be32(reg)
>>>> diff --git a/test/dm/ofnode.c b/test/dm/ofnode.c
>>>> index cea0746bb3..e6c925eba6 100644
>>>> --- a/test/dm/ofnode.c
>>>> +++ b/test/dm/ofnode.c
>>>> @@ -286,7 +286,7 @@ static int dm_test_ofnode_get_reg(struct
>>>> unit_test_state *uts)
>>>> ut_assert(ofnode_valid(node));
>>>> addr = ofnode_get_addr(node);
>>>> size = ofnode_get_size(node);
>>>> - ut_asserteq(FDT_ADDR_T_NONE, addr);
>>>> + ut_asserteq_64(FDT_ADDR_T_NONE, addr);
>>>> ut_asserteq(FDT_SIZE_T_NONE, size);
>>>>
>>>> node = ofnode_path("/translation-test@8000/noxlatebus@3,300/dev@42");
>>>> diff --git a/test/dm/pci.c b/test/dm/pci.c
>>>> index fa2e4a8559..00e4440a9d 100644
>>>> --- a/test/dm/pci.c
>>>> +++ b/test/dm/pci.c
>>>> @@ -331,10 +331,10 @@ static int dm_test_pci_addr_live(struct
>>>> unit_test_state *uts)
>>>> struct udevice *swap1f, *swap1;
>>>>
>>>> ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1f, 0), &swap1f));
>>>> - ut_asserteq(FDT_ADDR_T_NONE, dev_read_addr_pci(swap1f));
>>>> + ut_asserteq_64(FDT_ADDR_T_NONE, dev_read_addr_pci(swap1f));
>>>>
>>>> ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1, 0), &swap1));
>>>> - ut_asserteq(FDT_ADDR_T_NONE, dev_read_addr_pci(swap1));
>>>> + ut_asserteq_64(FDT_ADDR_T_NONE, dev_read_addr_pci(swap1));
>>>>
>>>> return 0;
>>>> }
>>>> diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c
>>>> index 8866d4d959..e1de066226 100644
>>>> --- a/test/dm/test-fdt.c
>>>> +++ b/test/dm/test-fdt.c
>>>> @@ -768,7 +768,7 @@ static int dm_test_fdt_livetree_writing(struct
>>>> unit_test_state *uts)
>>>> /* Test setting generic properties */
>>>>
>>>> /* Non-existent in DTB */
>>>> - ut_asserteq(FDT_ADDR_T_NONE, dev_read_addr(dev));
>>>> + ut_asserteq_64(FDT_ADDR_T_NONE, dev_read_addr(dev));
>>>> /* reg = 0x42, size = 0x100 */
>>>> ut_assertok(ofnode_write_prop(node, "reg", 8,
>>>> "\x00\x00\x00\x42\x00\x00\x01\x00"));
>>>
>>> Since this commit, I'm getting this dev_get_priv warning:
>>>
>>> [...]
>>> U-Boot 2022.01-00766-g9876ae7db6d-dirty (Feb 14 2022 - 16:15:21 +0100)
>>>
>>> Model: SIMATIC IOT2050 Basic
>>> DRAM: 1 GiB
>>> Core: 94 devices, 28 uclasses, devicetree: separate
>>> WDT: Not starting watchdog@40610000
>>> MMC: mmc@4fa0000: 0
>>> Loading Environment from SPIFlash... SF: Detected w25q128 with page size
>>> 256 Bytes, erase size 64 KiB, total 16 MiB
>>> drivers/dma/ti/k3-udma.c:1744 __dev_get_priv: null device
>>> drivers/dma/ti/k3-udma.c:1744 __dev_get_priv: null device
>>> OK
>>> In: serial
>>> Out: serial
>>> Err: serial
>>> Net: No ethernet found.
>>> Hit any key to stop autoboot: 0
>>>
>>> (I've instrumented dev_get_priv to tell me file:line)
>>>
>>> Is that a sleeping problem surfaced by the commit or a real regression?
>>> I can boot, though.
>>>
>>> Jan
>>>
>>
>> It should be interesting to understand why uclass_get_device_by_phandle()
>> return tmp = NULL.
>
> Yep.
>
>> What's the return value of uclass_get_device_by_phandle() ?
>>
>
> -22, EINVAL.
As EINVAL is one of the more "common" error value, i think you have to go
deeper
to see where the uclass_get_device_by_phandle() is failing.
Patrice
>
> Jan
>
