Kim Phillips <kim.phill...@freescale.com> wrote on 2010/11/28 17:31:25: > > On Tue, 23 Nov 2010 12:38:57 -0600 > Scott Wood <scottw...@freescale.com> wrote: > > > On Tue, 23 Nov 2010 19:16:01 +0100 > > Joakim Tjernlund <joakim.tjernl...@transmode.se> wrote: > > > > > Could we have an ACK before relese please? > > > > > > > After the removal of COLD/WARM start flags my mpc8321 > > > > board didn't boot anymore. > > > > Trial and error suggests that map/remap_flash_by_xxx needs > > > > to wait after updating LBLAWAR1 to make sure the the change has > > > > reached the HW before continuing with the code that depends on it. > > > > Final fix suggested by Scott Wood. > > > > > > > > Signed-off-by: Joakim Tjernlund <joakim.tjernl...@transmode.se> > > > > --- > > > > > > > > v2: Final adjustmenst based on inpt from Scott Wood. > > > > arch/powerpc/cpu/mpc83xx/start.S | 8 ++++++++ > > > > 1 files changed, 8 insertions(+), 0 deletions(-) > > > > ACK > > > > -Scott > > applied.
BTW, there was one named powerpc: fix mpc8315erdb and mpc8313erdb NAND linker script which I think you should consider. I don't really care as I don't use these boards, I just noticed it by chance. Jocke _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
