Correct the min/max voltages of VDD_CPU. As per data sheet the VDD_CPU
minimum voltage is .6V & maximum voltage is .9V.

Correct the same. While at it fix the comment to reflect VDD_CPU
instead of VDD_MPU.

Data Sheet Link: https://www.ti.com/lit/gpn/dra829v

Signed-off-by: Keerthy <j-keer...@ti.com>
---
 arch/arm/dts/k3-j721e-r5-common-proc-board.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts 
b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
index 5362c52870..1507109892 100644
--- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
@@ -259,10 +259,10 @@
                regulators: regulators {
                        u-boot,dm-spl;
                        buck12_reg: buck12 {
-                               /*VDD_MPU*/
+                               /*VDD_CPU*/
                                regulator-name = "buck12";
-                               regulator-min-microvolt = <800000>;
-                               regulator-max-microvolt = <1250000>;
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <900000>;
                                regulator-always-on;
                                regulator-boot-on;
                                u-boot,dm-spl;
-- 
2.17.1

Reply via email to