>-----Original Message----- >From: Tom Rini <tr...@konsulko.com> >Sent: Monday, January 31, 2022 8:56 PM >To: Michael Walle <mich...@walle.cc>; Priyanka Jain <priyanka.j...@nxp.com> >Cc: u-boot@lists.denx.de >Subject: Re: [PATCH 00/10] board: sl28: add sl28cpld support and board >cleanups > >On Mon, Jan 31, 2022 at 08:51:39AM +0100, Michael Walle wrote: >> Am 2021-11-15 23:45, schrieb Michael Walle: >> > Add support for the sl28cpld management controller found on this board. >> > This is especially useful, because of the integrated watchdog in >> > this controller. It is used to supervise the bootup of the >> > bootloader and will automatically switch to the failsafe bootloader >> > if u-boot didn't start. >> > Up >> > until now, we had to disable this feature, leaving a gap in the >> > failsafe boot concept of this board. Now, with this driver in place, >> > this watchdog can be enabled at reset and u-boot will disable it >> > late during its startup. >> > >> > Additionally, add support for the GPIOs which are connected to this >> > controller. >> > >> > Besides this support, there are various cleanups, like DRAM output >> > fix, printing the version of the management controller and disabling >> > the random MAC address generation. >> > >> > Implementationwise, the MFD driver is implemented as UCLASS_NOP >> > which provides basic access functions and will enumerate its child >> > nodes. The device tree binding is the same as already acked by the linux >kernel. >> >> Ping. This is now 2.5 month old. It doesn't even touch anything >> outside my own board. > >Priyanka? > >-- >Tom I saw the series delegated to me today. I will review and merge if no comments in my next pull-request. Regards Priyanka
