Move the SATA options inside an 'if SATA' part, so they are grouped.
Fix the 'Complient' typo while we are here.
Signed-off-by: Simon Glass <s...@chromium.org>
---
drivers/ata/Kconfig | 71 +++++++++++++++++++++++----------------------
1 file changed, 37 insertions(+), 34 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 1def9305dd5..6e8363c04d9 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -48,16 +48,6 @@ config SPL_AHCI_PCI
depends on SPL_PCI
depends on SPL_SATA_SUPPORT && DM_SCSI
-config SATA_CEVA
- bool "Ceva Sata controller"
- depends on AHCI
- depends on DM_SCSI
- help
- This option enables Ceva Sata controller hard IP available on Xilinx
- ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and
- AHCI 1.3 specifications with hot-plug detect feature.
-
-
config DWC_AHCI
bool "Enable Synopsys DWC AHCI driver support"
select SCSI_AHCI
@@ -83,30 +73,6 @@ config DWC_AHSATA_AHCI
help
Enable this option unless you need your private ahci implementation
-config FSL_SATA
- bool "Enable Freescale SATA controller driver support"
- select AHCI
- select LIBATA
- help
- Enable this driver to support the SATA controller found in
- some Freescale PowerPC SoCs.
-
-config SATA_MV
- bool "Enable Marvell SATA controller driver support"
- select AHCI
- select LIBATA
- help
- Enable this driver to support the SATA controller found in
- some Marvell SoCs.
-
-config SATA_SIL
- bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver
support"
- select AHCI
- select LIBATA
- help
- Enable this driver to support the SIL3131, SIL3132 and SIL3124
- SATA controllers.
-
config SUNXI_AHCI
bool "Enable Allwinner SATA driver support"
depends on AHCI
@@ -134,4 +100,41 @@ config MTK_AHCI
Enable this driver to support Sata devices through
Mediatek AHCI controller (e.g. MT7622).
+if SATA
+
+config SATA_CEVA
+ bool "Ceva Sata controller"
+ depends on AHCI
+ depends on DM_SCSI
+ help
+ This option enables Ceva Sata controller hard IP available on Xilinx
+ ZynqMP. Support up to 2 external devices. Compliant with SATA 3.1 and
+ AHCI 1.3 specifications with hot-plug detect feature.
+
+config FSL_SATA
+ bool "Enable Freescale SATA controller driver support"
+ select AHCI
+ select LIBATA
+ help
+ Enable this driver to support the SATA controller found in
+ some Freescale PowerPC SoCs.
+
+config SATA_MV
+ bool "Enable Marvell SATA controller driver support"
+ select AHCI
+ select LIBATA
+ help
+ Enable this driver to support the SATA controller found in
+ some Marvell SoCs.
+
+config SATA_SIL
+ bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver
support"
+ select AHCI
+ select LIBATA
+ help
+ Enable this driver to support the SIL3131, SIL3132 and SIL3124
+ SATA controllers.
+
+endif # SATA
+
endmenu
--
2.35.0.rc2.247.g8bbb082509-goog
