On Fri, 28 Jan 2022 21:31:28 -0500
Jesse Taube <mr.bossman...@gmail.com> wrote:
> On 1/28/22 21:25, Andre Przywara wrote:
> > On Wed, 26 Jan 2022 08:53:28 -0500
> > Jesse Taube <mr.bossman...@gmail.com> wrote:
> >
> >> From: Icenowy Zheng <icen...@aosc.io>
> >>
> >> Add device tree files for suniv and
> >> Lichee Pi Nano it is a board based on F1C100s.
> >
> > As mentioned in the other email, please do a 1:1 copy from the current
> > Linux tree. Yes, this will miss MMC and USB, but I am happy to take a
> > fixup patch on short notice when the respective kernel patches hit some
> > maintainer tree. > Cheers,
> Uh dts wont compile without a mmc node its a bug in another sunxi dts.
Not sure I follow, it compiles fine in the kernel, doesn't it?
> Also Icenowy's email chnaged to to .io not .xyz can i change that in this?
Please no changes compared to Linux, there is no "U-Boot DT", it's
the same hardware, so the same DT, just synced from the definitive
repository (the Linux tree).
Yes, the file split is different here, but that doesn't matter, just
copy the current Linux files.
Cheers,
Andre
> > Andre
> >
> >>
> >> Signed-off-by: Icenowy Zheng <icen...@aosc.io>
> >> Signed-off-by: Jesse Taube <mr.bossman...@gmail.com>
> >> ---
> >> V1->V2:
> >> * Sync with Linux
> >> * Re-add MMC node
> >> ---
> >> arch/arm/dts/Makefile | 2 +
> >> arch/arm/dts/suniv-f1c100s-licheepi-nano.dts | 29 ++++
> >> arch/arm/dts/suniv-f1c100s.dtsi | 6 +
> >> arch/arm/dts/suniv.dtsi | 160 +++++++++++++++++++
> >> 4 files changed, 197 insertions(+)
> >> create mode 100644 arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> >> create mode 100644 arch/arm/dts/suniv-f1c100s.dtsi
> >> create mode 100644 arch/arm/dts/suniv.dtsi
> >>
> >> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> >> index 453e2fd1a9..07030deeca 100644
> >> --- a/arch/arm/dts/Makefile
> >> +++ b/arch/arm/dts/Makefile
> >> @@ -497,6 +497,8 @@ dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
> >> stm32h743i-eval.dtb \
> >> stm32h750i-art-pi.dtb
> >>
> >> +dtb-$(CONFIG_MACH_SUNIV) += \
> >> + suniv-f1c100s-licheepi-nano.dtb
> >> dtb-$(CONFIG_MACH_SUN4I) += \
> >> sun4i-a10-a1000.dtb \
> >> sun4i-a10-ba10-tvbox.dtb \
> >> diff --git a/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> >> b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> >> new file mode 100644
> >> index 0000000000..9e89eec5bd
> >> --- /dev/null
> >> +++ b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> >> @@ -0,0 +1,29 @@
> >> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
> >> +/*
> >> + * Copyright 2018 Icenowy Zheng <icen...@aosc.io>
> >> + */
> >> +
> >> +/dts-v1/;
> >> +#include "suniv-f1c100s.dtsi"
> >> +
> >> +#include <dt-bindings/gpio/gpio.h>
> >> +
> >> +/ {
> >> + model = "Lichee Pi Nano";
> >> + compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s",
> >> + "allwinner,suniv";
> >> +
> >> + aliases {
> >> + serial0 = &uart0;
> >> + };
> >> +
> >> + chosen {
> >> + stdout-path = "serial0:115200n8";
> >> + };
> >> +};
> >> +
> >> +&uart0 {
> >> + pinctrl-names = "default";
> >> + pinctrl-0 = <&uart0_pe_pins>;
> >> + status = "okay";
> >> +};
> >> diff --git a/arch/arm/dts/suniv-f1c100s.dtsi
> >> b/arch/arm/dts/suniv-f1c100s.dtsi
> >> new file mode 100644
> >> index 0000000000..f084bc8dd1
> >> --- /dev/null
> >> +++ b/arch/arm/dts/suniv-f1c100s.dtsi
> >> @@ -0,0 +1,6 @@
> >> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
> >> +/*
> >> + * Copyright 2018 Icenowy Zheng <icen...@aosc.io>
> >> + */
> >> +
> >> +#include "suniv.dtsi"
> >> diff --git a/arch/arm/dts/suniv.dtsi b/arch/arm/dts/suniv.dtsi
> >> new file mode 100644
> >> index 0000000000..ad2bbb7a12
> >> --- /dev/null
> >> +++ b/arch/arm/dts/suniv.dtsi
> >> @@ -0,0 +1,160 @@
> >> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
> >> +/*
> >> + * Copyright 2018 Icenowy Zheng <icen...@aosc.io>
> >> + */
> >> +
> >> +#include <dt-bindings/clock/suniv-ccu.h>
> >> +#include <dt-bindings/reset/suniv-ccu.h>
> >> +
> >> +/ {
> >> + #address-cells = <1>;
> >> + #size-cells = <1>;
> >> + interrupt-parent = <&intc>;
> >> +
> >> + clocks {
> >> + osc24M: clk-24M {
> >> + #clock-cells = <0>;
> >> + compatible = "fixed-clock";
> >> + clock-frequency = <24000000>;
> >> + clock-output-names = "osc24M";
> >> + };
> >> +
> >> + osc32k: clk-32k {
> >> + #clock-cells = <0>;
> >> + compatible = "fixed-clock";
> >> + clock-frequency = <32768>;
> >> + clock-output-names = "osc32k";
> >> + };
> >> + };
> >> +
> >> + cpus {
> >> + cpu {
> >> + compatible = "arm,arm926ej-s";
> >> + device_type = "cpu";
> >> + };
> >> + };
> >> +
> >> + soc {
> >> + compatible = "simple-bus";
> >> + #address-cells = <1>;
> >> + #size-cells = <1>;
> >> + ranges;
> >> +
> >> + sram-controller@1c00000 {
> >> + compatible = "allwinner,suniv-f1c100s-system-control",
> >> + "allwinner,sun4i-a10-sram-controller";
> >> + reg = <0x01c00000 0x30>;
> >> + #address-cells = <1>;
> >> + #size-cells = <1>;
> >> + ranges;
> >> +
> >> + sram_d: sram@10000 {
> >> + compatible = "mmio-sram";
> >> + reg = <0x00010000 0x1000>;
> >> + #address-cells = <1>;
> >> + #size-cells = <1>;
> >> + ranges = <0 0x00010000 0x1000>;
> >> +
> >> + otg_sram: sram-section@0 {
> >> + compatible =
> >> "allwinner,suniv-f1c100s-sram-d",
> >> +
> >> "allwinner,sun4i-a10-sram-d";
> >> + reg = <0x0000 0x1000>;
> >> + status = "disabled";
> >> + };
> >> + };
> >> + };
> >> +
> >> + mmc0: mmc@1c0f000 {
> >> + compatible = "allwinner,sun4i-a10-mmc";
> >> + reg = <0x01c0f000 0x1000>;
> >> + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
> >> + clock-names = "ahb", "mmc";
> >> + interrupts = <32>;
> >> + resets = <&ccu RST_BUS_MMC0>;
> >> + reset-names = "ahb";
> >> + status = "disabled";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + };
> >> +
> >> + ccu: clock@1c20000 {
> >> + compatible = "allwinner,suniv-ccu";
> >> + reg = <0x01c20000 0x400>;
> >> + clocks = <&osc24M>, <&osc32k>;
> >> + clock-names = "hosc", "losc";
> >> + #clock-cells = <1>;
> >> + #reset-cells = <1>;
> >> + };
> >> +
> >> + intc: interrupt-controller@1c20400 {
> >> + compatible = "allwinner,suniv-ic";
> >> + reg = <0x01c20400 0x400>;
> >> + interrupt-controller;
> >> + #interrupt-cells = <1>;
> >> + };
> >> +
> >> + pio: pinctrl@1c20800 {
> >> + compatible = "allwinner,suniv-pinctrl";
> >> + reg = <0x01c20800 0x400>;
> >> + interrupts = <38>, <39>, <40>;
> >> + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
> >> + clock-names = "apb", "hosc", "losc";
> >> + gpio-controller;
> >> + interrupt-controller;
> >> + #interrupt-cells = <3>;
> >> + #gpio-cells = <3>;
> >> +
> >> + uart0_pe_pins: uart0-pe-pins {
> >> + pins = "PE0", "PE1";
> >> + function = "uart0";
> >> + };
> >> + };
> >> +
> >> + timer@1c20c00 {
> >> + compatible = "allwinner,suniv-f1c100s-timer",
> >> + "allwinner,sun4i-a10-timer";
> >> + reg = <0x01c20c00 0x90>;
> >> + interrupts = <13>;
> >> + clocks = <&osc24M>;
> >> + };
> >> +
> >> + wdt: watchdog@1c20ca0 {
> >> + compatible = "allwinner,suniv-f1c100s-wdt",
> >> + "allwinner,sun6i-a31-wdt";
> >> + reg = <0x01c20ca0 0x20>;
> >> + };
> >> +
> >> + uart0: serial@1c25000 {
> >> + compatible = "snps,dw-apb-uart";
> >> + reg = <0x01c25000 0x400>;
> >> + interrupts = <1>;
> >> + reg-shift = <2>;
> >> + reg-io-width = <4>;
> >> + clocks = <&ccu CLK_BUS_UART0>;
> >> + resets = <&ccu RST_BUS_UART0>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + uart1: serial@1c25400 {
> >> + compatible = "snps,dw-apb-uart";
> >> + reg = <0x01c25400 0x400>;
> >> + interrupts = <2>;
> >> + reg-shift = <2>;
> >> + reg-io-width = <4>;
> >> + clocks = <&ccu CLK_BUS_UART1>;
> >> + resets = <&ccu RST_BUS_UART1>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + uart2: serial@1c25800 {
> >> + compatible = "snps,dw-apb-uart";
> >> + reg = <0x01c25800 0x400>;
> >> + interrupts = <3>;
> >> + reg-shift = <2>;
> >> + reg-io-width = <4>;
> >> + clocks = <&ccu CLK_BUS_UART2>;
> >> + resets = <&ccu RST_BUS_UART2>;
> >> + status = "disabled";
> >> + };
> >> + };
> >> +};
> >
