We can use same U-Boot binary compiled using qemu-riscv64_smode_defconfig on QEMU virt machine and QEMU spike machine. To achieve this, we need HTIF console support for U-Boot QEMU RISC-V board hence this series.
To test this series with latest OpenSBI, we can use the following command: qemu-system-riscv64 -M spike -m 256M -display none -serial stdio \ -bios opensbi/build/platform/generic/firmware/fw_jump.bin -kernel \ ./u-boot/u-boot.bin These patch can be found in qemu_riscv_htif_v2 branch at: https://github.com/avpatel/u-boot.git Changes since v1: - Use ofnode_by_compatible() in PATCH3 - Updated QEMU RISC-V documentation in PATCH4 Anup Patel (4): serial: Add RISC-V HTIF console driver riscv: qemu: Enable HTIF console support riscv: qemu: Implement is_flash_available() for MTD NOR doc: qemu-riscv: Update documentation for QEMU spike machine board/emulation/qemu-riscv/Kconfig | 1 + board/emulation/qemu-riscv/qemu-riscv.c | 12 ++ doc/board/emulation/qemu-riscv.rst | 48 ++++--- drivers/serial/Kconfig | 8 ++ drivers/serial/Makefile | 1 + drivers/serial/serial_htif.c | 178 ++++++++++++++++++++++++ 6 files changed, 232 insertions(+), 16 deletions(-) create mode 100644 drivers/serial/serial_htif.c -- 2.25.1
