On Tue, Jan 25, 2022 at 2:00 PM Anup Patel <apa...@ventanamicro.com> wrote: > > On Tue, Jan 25, 2022 at 10:22 AM Bin Meng <bmeng...@gmail.com> wrote: > > > > On Sat, Jan 15, 2022 at 12:20 AM Anup Patel <apa...@ventanamicro.com> wrote: > > > > > > Quite a few RISC-V emulators and ISS (including Spike) have host > > > transfer interface (HTIF) based console. This patch adds HTIF > > > based console driver for RISC-V platforms which depends totally > > > on DT node for HTIF register base address. > > > > > > Signed-off-by: Anup Patel <apa...@ventanamicro.com> > > > Reviewed-by: Philipp Tomsich <philipp.toms...@vrull.eu> > > > --- > > > drivers/serial/Kconfig | 8 ++ > > > drivers/serial/Makefile | 1 + > > > drivers/serial/serial_htif.c | 178 +++++++++++++++++++++++++++++++++++ > > > 3 files changed, 187 insertions(+) > > > create mode 100644 drivers/serial/serial_htif.c > > > > > > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig > > > index 6c8fdda9a0..345d1881f5 100644 > > > --- a/drivers/serial/Kconfig > > > +++ b/drivers/serial/Kconfig > > > @@ -866,6 +866,14 @@ config PXA_SERIAL > > > If you have a machine based on a Marvell XScale PXA2xx CPU you > > > can enable its onboard serial ports by enabling this option. > > > > > > +config HTIF_CONSOLE > > > + bool "RISC-V HTIF console support" > > > + depends on DM_SERIAL && 64BIT > > > > Does this driver not work on 32-bit? > > Only putc() works but getc() does not work on 32-bit. Same issue > is there with OpenSBI and BBL as well. That's why I have restricted > this driver to 64-bit only. >
I don't get it. Is this a QEMU riscv32 bug? Regards, Bin
