> -----Original Message----- > From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] > On Behalf Of Eric Cooper > Sent: Monday, November 22, 2010 2:59 AM > To: u-boot@lists.denx.de > Subject: [U-Boot] [PATCH v3] Seagate FreeAgent DockStar support > > start with sheevaplug configuration > add modifications by Alexander Holler <hol...@ahsoftware.de> > change RAM definitions to one bank (128 MB) > change ident string and prompt > change environment to 0xA0000 > define MTD partitions and default environment variables > add support for LEDs > > Signed-off-by: Eric Cooper <e...@cmu.edu> > --- > Changes for v2: > - rebased on master, post ARM and kirkwood relocation changes > - squashed into single commit > > Changes for v3: > - moved files to board/Seagate/dockstar/ and updated copyright notices > - removed dockstar entry from MAKEALL > - moved CONFIG_SYS_TEXT_BASE from config.mk to > include/configs/dockstar.h > - corrected comment in board/Seagate/dockstar/kwbimage.cfg > > MAINTAINERS | 4 + > board/Seagate/dockstar/Makefile | 54 +++++++++++ > board/Seagate/dockstar/dockstar.c | 181 > +++++++++++++++++++++++++++++++++++ > board/Seagate/dockstar/dockstar.h | 44 +++++++++ > board/Seagate/dockstar/kwbimage.cfg | 165 > +++++++++++++++++++++++++++++++ > boards.cfg | 1 + > include/configs/dockstar.h | 125 ++++++++++++++++++++++++ > 7 files changed, 574 insertions(+), 0 deletions(-) > create mode 100644 board/Seagate/dockstar/Makefile > create mode 100644 board/Seagate/dockstar/dockstar.c > create mode 100644 board/Seagate/dockstar/dockstar.h > create mode 100644 board/Seagate/dockstar/kwbimage.cfg > create mode 100644 include/configs/dockstar.h > ...snip... > diff --git a/board/Seagate/dockstar/kwbimage.cfg > b/board/Seagate/dockstar/kwbimage.cfg > new file mode 100644 > index 0000000..98b514d > --- /dev/null > +++ b/board/Seagate/dockstar/kwbimage.cfg > @@ -0,0 +1,165 @@ > +# > +# Copyright (C) 2010 Eric C. Cooper <e...@cmu.edu> > +# > +# Based on sheevaplug/kwbimage.cfg originally written by > +# Prafulla Wadaskar <prafu...@marvell.com> > +# (C) Copyright 2009 > +# Marvell Semiconductor <www.marvell.com> > +# > +# See file CREDITS for list of people who contributed to this > +# project. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation; either version 2 of > +# the License, or (at your option) any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write to the Free Software > +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, > +# MA 02110-1301 USA > +# > +# Refer docs/README.kwimage for more details about how-to configure > +# and create kirkwood boot image > +# > + > +# Boot Media configurations > +BOOT_FROM nand > +NAND_ECC_MODE default > +NAND_PAGE_SIZE 0x0800
Are the contents for this file exactly same as sheevaplug/kwbimage.cfg? If yes then you can reuse that file and avoid adding this file here by using configuration in board config file. ...snip... > diff --git a/boards.cfg b/boards.cfg > index 08e531e..50e9d1b 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -376,6 +376,7 @@ guruplug arm arm926ejs - Marvell > kirkwood > mv88f6281gtw_ge arm arm926ejs - Marvell > kirkwood > openrd_base arm arm926ejs - Marvell kirkwood > sheevaplug arm arm926ejs - Marvell kirkwood > +dockstar arm arm926ejs - Seagate Kirkwood Please check if you have missed to maintain this in order > imx27lite arm arm926ejs imx27lite logicpd mx27 > magnesium arm arm926ejs imx27lite logicpd mx27 > omap5912osk arm arm926ejs - ti omap > diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h > new file mode 100644 > index 0000000..5a058b6 > --- /dev/null > +++ b/include/configs/dockstar.h > @@ -0,0 +1,125 @@ > +/* > + * Copyright (C) 2010 Eric C. Cooper <e...@cmu.edu> > + * > + * Based on sheevaplug.h originally written by > + * Prafulla Wadaskar <prafu...@marvell.com> > + * (C) Copyright 2009 > + * Marvell Semiconductor <www.marvell.com> > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, > + * MA 02110-1301 USA > + */ > + > +#ifndef _CONFIG_DOCKSTAR_H > +#define _CONFIG_DOCKSTAR_H > + > +/* > + * Version number information > + */ > +#define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar" > + > +/* > + * High Level Configuration Options (easy to change) > + */ > +#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ > +#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ > +#define CONFIG_KW88F6281 1 /* SOC Name */ > +#define CONFIG_MACH_DOCKSTAR /* Machine type */ > +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ > + > +/* > + * Commands configuration > + */ > +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ > +#include <config_cmd_default.h> > +#define CONFIG_CMD_DHCP > +#define CONFIG_CMD_ENV > +#define CONFIG_CMD_MII > +#define CONFIG_CMD_NAND > +#define CONFIG_CMD_PING > +#define CONFIG_CMD_USB > +/* > + * mv-common.h should be defined after CMD configs since it used them > + * to enable certain macros > + */ > +#include "mv-common.h" > + > +#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ > +#define CONFIG_SYS_PROMPT "DockStar> " /* Command Prompt */ > + > +/* > + * Environment variables configurations > + */ > +#ifdef CONFIG_CMD_NAND > +#define CONFIG_ENV_IS_IN_NAND 1 > +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ > +#else > +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ > +#endif > +/* > + * max 4k env size is enough, but in case of nand > + * it has to be rounded to sector size > + */ > +#define CONFIG_ENV_SIZE 0x20000 /* 128k */ > +#define CONFIG_ENV_ADDR 0xA0000 > +#define CONFIG_ENV_OFFSET 0xA0000 /* env starts here */ u-boot.bin is not more than 0x60000, its better to use env offset at 0x60000 to pack u-boot+env in first 512kb Regards.. Prafulla . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
