[RFC 4/6] mmc: exynos_dw_mmc: remove the error message and not return

[Jaehoon Chung]

Remove error message and not return when there is error value.
After checked whether error is or not, if be, use default value.

Signed-off-by: Jaehoon Chung <jh80.ch...@samsung.com>
---
 drivers/mmc/exynos_dw_mmc.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index 526c30d2fe0f..49e57f695029 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -182,18 +182,12 @@ static int exynos_dwmci_get_config(const void *blob, int 
node,
 
        /* Extract the timing info from the node */
        err =  fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3);
-       if (err) {
-               printf("DWMMC%d: Can't get sdr-timings for devider\n",
-                               host->dev_index);
-               return -EINVAL;
-       }
-
        priv->sdr_timing = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
                        DWMCI_SET_DRV_CLK(timing[1]) |
                        DWMCI_SET_DIV_RATIO(timing[2]));
 
        /* sdr_timing didn't assigned anything, use the default value */
-       if (!priv->sdr_timing) {
+       if (err || !priv->sdr_timing) {
                if (host->dev_index == 0)
                        priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL;
                else if (host->dev_index == 2)
-- 
2.29.0