imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties.
Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded. Signed-off-by: Fabio Estevam <feste...@denx.de> --- doc/board/nxp/imx8mm_evk.rst | 1 - 1 file changed, 1 deletion(-) diff --git a/doc/board/nxp/imx8mm_evk.rst b/doc/board/nxp/imx8mm_evk.rst index b377c4de276d..b9e67b954fc2 100644 --- a/doc/board/nxp/imx8mm_evk.rst +++ b/doc/board/nxp/imx8mm_evk.rst @@ -42,7 +42,6 @@ Build U-Boot $ export CROSS_COMPILE=aarch64-poky-linux- $ make imx8mm_evk_defconfig - $ export ATF_LOAD_ADDR=0x920000 $ make Burn the flash.bin to MicroSD card offset 33KB: -- 2.25.1