On Tuesday 16 November 2021 15:02:48 Tony Dinh wrote: > Hi Pali, > > On Tue, Nov 16, 2021 at 2:37 PM Pali Rohár <p...@kernel.org> wrote: > > > > On Tuesday 16 November 2021 14:26:56 Tony Dinh wrote: > > > Hi Pali, > > > > > > While we are at it, this default should be changed in > > > drivers/usb/host/Kconfig. > > > > > > config USB_XHCI_MVEBU > > > bool "MVEBU USB 3.0 support" > > > default y > > > > > > Setting this default correctly will save a couple Kbytes for other boards. > > > default y if ARCH_MVEBU > > > > Hello! USB_XHCI_MVEBU has currently "depends on ARCH_MVEBU" which means > > that USB_XHCI_MVEBU cannot be enabled when ARCH_MVEBU is disabled. So > > "default y if ARCH_MVEBU" is same as "default y". > > Ah, thanks. This "depends on ARCH_MVEBU" was added in the latest > master tree. I'm switching back and forth between the 2021.10 tag and > master so I did not see this in the 2021.10 tree.
Hello! Are you planning to send patches which add support for your kirkwood board into mainline U-Boot? I would like to know if we should take care about that PCIe kirkwood support as currently there is no board in mainline U-Boot which use PCIe on kirkwood SoC. > Thanks, > Tony > > > If you have mvebu board when mvebu xhci controller is unused, you can > > disable this option and save some space. I see that other xhci drivers > > have also "default y" so seems that this is the standard default option.
