Add support for mini6410 from FriendlyARM
Signed-off-by: Darius Augulis <augulis.dar...@gmail.com>
---
MAKEALL | 1
Makefile | 4
arch/arm/cpu/arm1176/s3c64xx/Makefile | 6 -
board/friendly_arm/mini6410/Makefile | 59 +++++
board/friendly_arm/mini6410/config.mk | 5
board/friendly_arm/mini6410/lowlevel_init.S | 256 +++++++++++++++++++++++
board/friendly_arm/mini6410/mini6410.c | 99 +++++++++
boards.cfg | 1
include/configs/mini6410.h | 137 ++++++++++++
nand_spl/board/friendly_arm/mini6410/Makefile | 107 ++++++++++
nand_spl/board/friendly_arm/mini6410/config.mk | 7 +
nand_spl/board/friendly_arm/mini6410/u-boot.lds | 85 ++++++++
nand_spl/nand_boot_s3c.c | 131 ++++++++++++
13 files changed, 896 insertions(+), 2 deletions(-)
create mode 100644 board/friendly_arm/mini6410/Makefile
create mode 100644 board/friendly_arm/mini6410/config.mk
create mode 100644 board/friendly_arm/mini6410/lowlevel_init.S
create mode 100644 board/friendly_arm/mini6410/mini6410.c
create mode 100644 include/configs/mini6410.h
create mode 100644 nand_spl/board/friendly_arm/mini6410/Makefile
create mode 100644 nand_spl/board/friendly_arm/mini6410/config.mk
create mode 100644 nand_spl/board/friendly_arm/mini6410/u-boot.lds
create mode 100644 nand_spl/nand_boot_s3c.c
diff --git a/MAKEALL b/MAKEALL
index 767d561..556aa82 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -404,6 +404,7 @@ LIST_ARM11=" \
imx31_litekit \
imx31_phycore \
imx31_phycore_eet \
+ mini6410 \
mx31ads \
mx31pdk \
mx31pdk_nand \
diff --git a/Makefile b/Makefile
index f0c2703..4dab98d 100644
--- a/Makefile
+++ b/Makefile
@@ -1087,6 +1087,10 @@ smdk6400_config : unconfig
@$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+mini6410_config : unconfig
+ @mkdir -p $(obj)include
+ @$(MKCONFIG) mini6410 arm arm1176 mini6410 friendly_arm s3c64xx
+
#========================================================================
# MIPS
#========================================================================
diff --git a/arch/arm/cpu/arm1176/s3c64xx/Makefile
b/arch/arm/cpu/arm1176/s3c64xx/Makefile
index b527939..6ce2b06 100644
--- a/arch/arm/cpu/arm1176/s3c64xx/Makefile
+++ b/arch/arm/cpu/arm1176/s3c64xx/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2010
+# Darius Augulis, <augulis.dar...@gmail.com>
+#
# (C) Copyright 2000-2003
# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
#
@@ -30,8 +33,7 @@ LIB = $(obj)lib$(SOC).a
SOBJS = reset.o
-COBJS-$(CONFIG_S3C6400) += cpu_init.o speed.o
-COBJS-y += timer.o
+COBJS-y += timer.o cpu_init.o speed.o
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
diff --git a/board/friendly_arm/mini6410/Makefile
b/board/friendly_arm/mini6410/Makefile
new file mode 100644
index 0000000..a1dbc41
--- /dev/null
+++ b/board/friendly_arm/mini6410/Makefile
@@ -0,0 +1,59 @@
+#
+# (C) Copyright 2010
+# Darius Augulis, <augulis.dar...@gmail.com>
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <l...@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS += mini6410.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+.PHONY: all
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak *~ .depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/friendly_arm/mini6410/config.mk
b/board/friendly_arm/mini6410/config.mk
new file mode 100644
index 0000000..5ec9fa9
--- /dev/null
+++ b/board/friendly_arm/mini6410/config.mk
@@ -0,0 +1,5 @@
+ifndef CONFIG_NAND_SPL
+CONFIG_SYS_TEXT_BASE = 0x57E00000
+else
+CONFIG_SYS_TEXT_BASE = 0x0C000000
+endif
diff --git a/board/friendly_arm/mini6410/lowlevel_init.S
b/board/friendly_arm/mini6410/lowlevel_init.S
new file mode 100644
index 0000000..d550ea2
--- /dev/null
+++ b/board/friendly_arm/mini6410/lowlevel_init.S
@@ -0,0 +1,256 @@
+/*
+ * MINI6410: Board initialization
+ *
+ * Copyright (C) 2010 Darius Augulis <augulis.dar...@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <config.h>
+#include <version.h>
+
+#include <asm/arch/s3c6400.h>
+
+#ifdef CONFIG_SERIAL1
+#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET)
+#elif defined(CONFIG_SERIAL2)
+#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART1_OFFSET)
+#else
+#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART2_OFFSET)
+#endif
+
+_TEXT_BASE:
+ .word CONFIG_SYS_TEXT_BASE
+
+ .globl lowlevel_init
+lowlevel_init:
+ mov r12, lr
+
+ /* LED on only #8 */
+ ldr r0, =ELFIN_GPIO_BASE
+ ldr r1, =0x55540000
+ str r1, [r0, #GPNCON_OFFSET]
+
+ ldr r1, =0x55555555
+ str r1, [r0, #GPNPUD_OFFSET]
+
+ ldr r1, =0xf000
+ str r1, [r0, #GPNDAT_OFFSET]
+
+#ifndef CONFIG_NAND_SPL
+ ldr r0, =ELFIN_GPIO_BASE
+ ldr r1, =0x1
+ str r1, [r0, #GPECON_OFFSET]
+ ldr r1, =0x0
+ str r1, [r0, #GPEDAT_OFFSET]
+#endif
+
+ ldr r0, =ELFIN_GPIO_BASE
+ ldr r1, =0x2A5AAAAA
+ str r1, [r0, #GPPCON_OFFSET]
+ ldr r1, =0x0
+ str r1, [r0, #GPPDAT_OFFSET]
+
+
+ ldr r1, =0x55555555
+ str r1, [r0, #MEM1DRVCON_OFFSET]
+
+ /* Disable Watchdog */
+ ldr r0, =0x7e000000 @0x7e004000
+ orr r0, r0, #0x4000
+ mov r1, #0
+ str r1, [r0]
+
+ /* External interrupt pending clear */
+ ldr r0, =(ELFIN_GPIO_BASE+EINTPEND_OFFSET) /*EINTPEND*/
+ ldr r1, [r0]
+ str r1, [r0]
+
+ ldr r0, =ELFIN_VIC0_BASE_ADDR @0x71200000
+ ldr r1, =ELFIN_VIC1_BASE_ADDR @0x71300000
+
+ /* Disable all interrupts (VIC0 and VIC1) */
+ mvn r3, #0x0
+ str r3, [r0, #oINTMSK]
+ str r3, [r1, #oINTMSK]
+
+ /* Set all interrupts as IRQ */
+ mov r3, #0x0
+ str r3, [r0, #oINTMOD]
+ str r3, [r1, #oINTMOD]
+
+ /* Pending Interrupt Clear */
+ mov r3, #0x0
+ str r3, [r0, #oVECTADDR]
+ str r3, [r1, #oVECTADDR]
+
+ /* init system clock */
+ bl system_clock_init
+
+#ifndef CONFIG_NAND_SPL
+ /* for UART */
+ bl uart_asm_init
+#endif
+
+#ifdef CONFIG_BOOT_NAND
+ /* simple init for NAND */
+ bl nand_asm_init
+#endif
+
+ /* Memory subsystem address 0x7e00f120 */
+ ldr r0, =ELFIN_MEM_SYS_CFG
+
+ /* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */
+ mov r1, #S3C64XX_MEM_SYS_CFG_NAND
+ str r1, [r0]
+
+ bl mem_ctrl_asm_init
+
+1:
+ mov lr, r12
+ mov pc, lr
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+system_clock_init:
+ ldr r0, =ELFIN_CLOCK_POWER_BASE /* 0x7e00f000 */
+
+#ifdef CONFIG_SYNC_MODE
+ ldr r1, [r0, #OTHERS_OFFSET]
+ mov r2, #0x40
+ orr r1, r1, r2
+ str r1, [r0, #OTHERS_OFFSET]
+
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ ldr r2, =0x80
+ orr r1, r1, r2
+ str r1, [r0, #OTHERS_OFFSET]
+
+check_syncack:
+ ldr r1, [r0, #OTHERS_OFFSET]
+ ldr r2, =0xf00
+ and r1, r1, r2
+ cmp r1, #0xf00
+ bne check_syncack
+#else /* ASYNC Mode */
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ ldr r1, [r0, #OTHERS_OFFSET]
+ bic r1, r1, #0xC0
+ orr r1, r1, #0x40
+ str r1, [r0, #OTHERS_OFFSET]
+
+wait_for_async:
+ ldr r1, [r0, #OTHERS_OFFSET]
+ and r1, r1, #0xf00
+ cmp r1, #0x0
+ bne wait_for_async
+
+ ldr r1, [r0, #OTHERS_OFFSET]
+ bic r1, r1, #0x40
+ str r1, [r0, #OTHERS_OFFSET]
+#endif
+
+ mov r1, #0xff00
+ orr r1, r1, #0xff
+ str r1, [r0, #APLL_LOCK_OFFSET]
+ str r1, [r0, #MPLL_LOCK_OFFSET]
+
+ /* Set Clock Divider */
+ ldr r1, [r0, #CLK_DIV0_OFFSET]
+ bic r1, r1, #0x30000
+ bic r1, r1, #0xff00
+ bic r1, r1, #0xff
+ ldr r2, =CLK_DIV_VAL
+ orr r1, r1, r2
+ str r1, [r0, #CLK_DIV0_OFFSET]
+
+ ldr r1, =APLL_VAL
+ str r1, [r0, #APLL_CON_OFFSET]
+ ldr r1, =MPLL_VAL
+ str r1, [r0, #MPLL_CON_OFFSET]
+
+ /* FOUT of EPLL is 96MHz */
+ ldr r1, =0x80200203
+ str r1, [r0, #EPLL_CON0_OFFSET]
+ ldr r1, =0x0
+ str r1, [r0, #EPLL_CON1_OFFSET]
+
+ /* APLL, MPLL, EPLL select to Fout */
+ ldr r1, [r0, #CLK_SRC_OFFSET]
+ orr r1, r1, #0x7
+ str r1, [r0, #CLK_SRC_OFFSET]
+
+ /* wait at least 200us to stablize all clock */
+ mov r1, #0x10000
+1: subs r1, r1, #1
+ bne 1b
+
+ /* Synchronization for VIC port */
+#if defined(CONFIG_SYNC_MODE)
+ ldr r1, [r0, #OTHERS_OFFSET]
+ orr r1, r1, #0x20
+ str r1, [r0, #OTHERS_OFFSET]
+#else
+ ldr r1, [r0, #OTHERS_OFFSET]
+ bic r1, r1, #0x20
+ str r1, [r0, #OTHERS_OFFSET]
+#endif
+ mov pc, lr
+
+
+#ifndef CONFIG_NAND_SPL
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+ /* set GPIO to enable UART */
+ ldr r0, =ELFIN_GPIO_BASE
+ ldr r1, =0x220022
+ str r1, [r0, #GPACON_OFFSET]
+ mov pc, lr
+#endif
+
+#ifdef CONFIG_BOOT_NAND
+/*
+ * NAND Interface init for SMDK6400
+ */
+nand_asm_init:
+ ldr r0, =ELFIN_NAND_BASE
+ ldr r1, [r0, #NFCONF_OFFSET]
+ orr r1, r1, #0x70
+ orr r1, r1, #0x7700
+ str r1, [r0, #NFCONF_OFFSET]
+
+ ldr r1, [r0, #NFCONT_OFFSET]
+ orr r1, r1, #0x07
+ str r1, [r0, #NFCONT_OFFSET]
+
+ mov pc, lr
+#endif
diff --git a/board/friendly_arm/mini6410/mini6410.c
b/board/friendly_arm/mini6410/mini6410.c
new file mode 100644
index 0000000..b96a23c
--- /dev/null
+++ b/board/friendly_arm/mini6410/mini6410.c
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2010
+ * Darius Augulis, <augulis.dar...@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/arch/s3c6400.h>
+
+/* ------------------------------------------------------------------------- */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static inline void delay(unsigned long loops)
+{
+ __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
+ "bne 1b"
+ : "=r" (loops) : "0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+#define DM9000_Tacs (0x0) // 0clk address set-up
+#define DM9000_Tcos (0x4) // 4clk chip selection set-up
+#define DM9000_Tacc (0xE) // 14clk access cycle
+#define DM9000_Tcoh (0x1) // 1clk chip selection hold
+#define DM9000_Tah (0x4) // 4clk address holding time
+#define DM9000_Tacp (0x6) // 6clk page mode access cycle
+#define DM9000_PMC (0x0) // normal(1data)page mode configuration
+
+static void dm9000_pre_init(void)
+{
+ SROM_BW_REG &= ~(0xf << 4);
+ SROM_BW_REG |= (1 << 7) | (1 << 6) | (1 << 4);
+ SROM_BC1_REG = ((DM9000_Tacs << 28) + (DM9000_Tcos << 24 ) +
+ (DM9000_Tacc << 16) + (DM9000_Tcoh << 12) +
+ (DM9000_Tah << 8) + (DM9000_Tacp << 4) + (DM9000_PMC));
+
+}
+
+int board_init(void)
+{
+ dm9000_pre_init();
+
+ gd->bd->bi_arch_number = MACH_TYPE;
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int dram_init (void)
+{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ printf("Board: MINI6410\n");
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+ return dm9000_initialize(bis);
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index 08e531e..54b3015 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -354,6 +354,7 @@ PM826_ROMBOOT_BIGFLASH powerpc mpc8260 pm826
- - PM826:BOOT_ROM,FLASH_32MB,
imx31_litekit arm arm1136 - logicpd mx31
omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti
tnetv107x
+mini6410 arm arm1176 mini6410 friendly_arm s3c64xx
armadillo arm arm720t
modnet50 arm arm720t
lpc2292sodimm arm arm720t - - lpc2292
diff --git a/include/configs/mini6410.h b/include/configs/mini6410.h
new file mode 100644
index 0000000..e2dcbd4
--- /dev/null
+++ b/include/configs/mini6410.h
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2010
+ * Darius Augulis <augulis.dar...@gmail.com>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <l...@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_S3C6410 1
+#define CONFIG_S3C64XX 1
+#define CONFIG_MINI6410 1
+
+#define CONFIG_SYS_NO_FLASH 1
+#define CONFIG_NAND_U_BOOT 1
+
+#define CONFIG_PERIPORT_REMAP
+#define CONFIG_PERIPORT_BASE 0x70000000
+#define CONFIG_PERIPORT_SIZE 0x13
+
+/* Relocation and internal SRAM options */
+#define CONFIG_SYS_IRAM_BASE 0x0C000000 /* Internal SRAM base
address */
+#define CONFIG_SYS_IRAM_SIZE 0x2000 /* 8 KB of internal
SRAM memory */
+#define CONFIG_SYS_IRAM_END (CONFIG_SYS_IRAM_BASE +
CONFIG_SYS_IRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IRAM_END -
GENERATED_GBL_DATA_SIZE)
+
+/* SDRAM options */
+#define CONFIG_SYS_SDRAM_BASE 0x50000000
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* memtest
works on */
+#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_TEXT_BASE /* 126MiB in
DRAM */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load
address */
+
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
+#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_SIZE (1024 * 1024)
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
+
+/* Environment options */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_OFFSET 0x40000
+#define CONFIG_ENV_IS_IN_NAND
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "MINI6410 # "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE 384
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_IDENT_STRING " for MINI6410"
+
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CLK_FREQ 12000000
+#define MACH_TYPE 2520
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_CLK_533_133_66
+#define CONFIG_SYNC_MODE
+
+/* Network */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DM9000_NO_SROM 1
+#define CONFIG_DM9000_BASE 0x18000000
+#define DM9000_IO CONFIG_DM9000_BASE
+#define DM9000_DATA (CONFIG_DM9000_BASE+4)
+#define CONFIG_ETHADDR 00:01:02:03:04:05
+#define CONFIG_IPADDR 192.168.1.20
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK 255.255.255.0
+
+/* serial console configuration */
+#define CONFIG_SERIAL1 1
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BOOTCOMMAND "nand read 50100000 100000 300000;
bootm 50100000"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw
console=ttySAC0 mini6410=0"
+
+/* Command definition */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_SAVEENV
+
+/* NAND configuration */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x70200010
+#define CONFIG_BOOT_NAND
+#define CONFIG_NAND
+#define CONFIG_NAND_S3C64XX
+
+#define CONFIG_SYS_NAND_PAGE_SIZE (2 * 1024)
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (CONFIG_SYS_NAND_PAGE_SIZE *
CONFIG_SYS_NAND_PAGE_COUNT)
+
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x57E00000
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (4 * 1024)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (252 * 1024)
+
+#endif /* __CONFIG_H */
diff --git a/nand_spl/board/friendly_arm/mini6410/Makefile
b/nand_spl/board/friendly_arm/mini6410/Makefile
new file mode 100644
index 0000000..71aaed1
--- /dev/null
+++ b/nand_spl/board/friendly_arm/mini6410/Makefile
@@ -0,0 +1,107 @@
+#
+# (C) Copyright 2010
+# Darius Augulis, <augulis.dar...@gmail.com>
+#
+# (C) Copyright 2006-2007
+# Stefan Roese, DENX Software Engineering, s...@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <l...@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CONFIG_NAND_SPL = y
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext
$(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL
+
+SOBJS = start.o cpu_init.o lowlevel_init.o
+COBJS = nand_boot_s3c.o s3c64xx.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin
$(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+$(nandobj)u-boot.lds: $(LDSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)start.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/arch/arm/cpu/arm1176/start.S $@
+
+# from SoC directory
+$(obj)cpu_init.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S $@
+
+# from board directory
+$(obj)lowlevel_init.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/board/friendly_arm/mini6410/lowlevel_init.S $@
+
+# from nand_spl directory
+$(obj)nand_boot_s3c.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/nand_spl/nand_boot_s3c.c $@
+
+$(obj)s3c64xx.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/drivers/mtd/nand/s3c64xx.c $@
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/friendly_arm/mini6410/config.mk
b/nand_spl/board/friendly_arm/mini6410/config.mk
new file mode 100644
index 0000000..d682446
--- /dev/null
+++ b/nand_spl/board/friendly_arm/mini6410/config.mk
@@ -0,0 +1,7 @@
+# PAD_TO used to generate a 4kByte binary needed for the combined image
+# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 4096
+PAD_TO := $(shell expr $$(($(CONFIG_SYS_TEXT_BASE) + 4096)))
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/nand_spl/board/friendly_arm/mini6410/u-boot.lds
b/nand_spl/board/friendly_arm/mini6410/u-boot.lds
new file mode 100644
index 0000000..4ee6d17
--- /dev/null
+++ b/nand_spl/board/friendly_arm/mini6410/u-boot.lds
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2010
+ * Darius Augulis, <augulis.dar...@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <ga...@denx.de>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <l...@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ start.o (.text)
+ cpu_init.o (.text)
+ nand_boot_s3c.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data)
+ __datarel_start = .;
+ *(.data.rel)
+ __datarelrolocal_start = .;
+ *(.data.rel.ro.local)
+ __datarellocal_start = .;
+ *(.data.rel.local)
+ __datarelro_start = .;
+ *(.data.rel.ro)
+ }
+
+ . = ALIGN(4);
+ __rel_dyn_start = .;
+ .rel.dyn : { *(.rel.dyn) }
+ __rel_dyn_end = .;
+
+ __dynsym_start = .;
+ .dynsym : { *(.dynsym) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
+ _end = .;
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
diff --git a/nand_spl/nand_boot_s3c.c b/nand_spl/nand_boot_s3c.c
new file mode 100644
index 0000000..d0c5534
--- /dev/null
+++ b/nand_spl/nand_boot_s3c.c
@@ -0,0 +1,131 @@
+/*
+ * (C) Copyright 2010
+ * Darius Augulis, <augulis.dar...@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+#include <asm/arch/s3c6400.h>
+
+static void disable_ce(void)
+{
+ int val = readl(NFCONT);
+ writel(val | (1 << 1), NFCONT);
+}
+
+static void enable_ce(void)
+{
+ int val = readl(NFCONT);
+ writel(val & ~(1 << 1), NFCONT);
+}
+
+static int nand_is_ready(void)
+{
+ return readl(NFSTAT) & 0x01;
+}
+
+static void nand_read_page(unsigned int block, unsigned int page, uchar *buf)
+{
+ int i;
+
+ writel(NAND_CMD_READ0, NFCMMD);
+
+ writel(0, NFADDR);
+ writel(0, NFADDR);
+ writel((page & 0x3f) | ((block << 6) & 0xC0), NFADDR);
+ writel((block >> 2) & 0xff, NFADDR);
+ writel((block >> 16) & 0xff, NFADDR);
+
+ writel(NAND_CMD_READSTART, NFCMMD);
+
+ while(!nand_is_ready());
+
+ for(i = 0; i < CONFIG_SYS_NAND_PAGE_SIZE; i++)
+ buf[i] = readb(NFDATA);
+}
+
+static int nand_load(unsigned int offs, unsigned int uboot_size, uchar *dst)
+{
+ unsigned int block, lastblock, page;
+
+ /* offs has to be aligned to a page address! */
+ block = offs / CONFIG_SYS_NAND_BLOCK_SIZE;
+ lastblock = (offs + uboot_size - 1) / CONFIG_SYS_NAND_BLOCK_SIZE;
+ page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE;
+
+ while (block <= lastblock) {
+ while (page < CONFIG_SYS_NAND_PAGE_COUNT) {
+ nand_read_page(block, page, dst);
+ dst += CONFIG_SYS_NAND_PAGE_SIZE;
+ page++;
+ }
+ page = 0;
+ block++;
+ }
+
+ return;
+}
+
+#if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
+void board_init_f (ulong bootflag)
+{
+ relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL,
+ CONFIG_SYS_TEXT_BASE);
+}
+#endif
+
+static void nand_init_hw(void)
+{
+ int val;
+
+ /* Set timing */
+ val = readl(NFCONF);
+ writel(val | 0x7770, NFCONF);
+
+ /* Enable NFC, release both CE's */
+ val = readl(NFCONT);
+ writel(val | 0x07, NFCONT);
+}
+
+/*
+ * The main entry for NAND booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from NAND into SDRAM and starts it from there.
+ */
+void nand_boot(void)
+{
+ __attribute__((noreturn)) void (*uboot)(void);
+
+ /* Init nand controller */
+ nand_init_hw();
+
+ enable_ce();
+
+ /* Load U-Boot image from NAND into RAM */
+ nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS,
+ CONFIG_SYS_NAND_U_BOOT_SIZE,
+ (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
+
+ disable_ce();
+
+ uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
+ (*uboot)();
+}
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
