Hi Peter, On Wed, 1 Dec 2021 at 07:23, Peter Robinson <pbrobin...@gmail.com> wrote: > > On Thu, Nov 25, 2021 at 5:39 PM Alper Nebi Yasak > <alpernebiya...@gmail.com> wrote: > > > > I have recently started testing booting U-Boot from SPI on my gru-kevin > > (as opposed to chainloading it from vendor coreboot + depthcharge) and > > brought it to a better working state based on an initial support patch > > from Marty [1][2] and some follow-up work by Simon [3]. > > > > I tried to keep them as the git author when I took things from their > > work, but squashing other changes into those and rewriting commit > > messages makes things a bit weird in my opinion, especially for keeping > > their signoff. Do tell me if there is a better way to that. > > > > As the Kevin and Bob boards are very similar. I assumed the config and > > devicetree changes will be appropriate for Bob as well, and applied them > > to it first. I do not have a Bob, so could not test on one myself, but > > Simon did test an earlier version of this and it appears to work [4]. > > > > Other useful things for these boards: > > - Patch to fix a hang when usb controllers exit [5] > > - Series to support HS400ES mode as HS400 training fails [6] > > - Hack to skip eMMC reinitialization so it keeps working [7] > > Is there docs updates to be done in doc/chromium/ for this so people > know how to use it ?
This is for bare-metal use though, so it isn't anything to do with Chromium at present. Regards, Simon
