Heinrich,
On Wed, Nov 24, 2021 at 12:10:32PM +0900, AKASHI Takahiro wrote:
> On Sat, Nov 20, 2021 at 01:54:30PM +0100, Heinrich Schuchardt wrote:
> > Hello Takahiro,
> >
> > in a prior mail we have discussed the creation of device paths for USB
> > mass storage devices.
> >
> > On the sand boxyou get the following devices after 'usb start':
> >
> > Class Index Probed Driver Name
> > -----------------------------------------------------------
> > usb 0 [ + ] usb_sandbox |-- usb@1
> > usb_hub 0 [ + ] usb_hub | `-- hub
> > usb_mass_s 0 [ + ] usb_mass_storage | |--
> > usb_mass_storage
> > blk 3 [ ] usb_storage_blk | | `--
> > usb_mass_storage.lun0
> > usb_mass_s 1 [ + ] usb_mass_storage | |--
> > usb_mass_storage
> > blk 4 [ ] usb_storage_blk | | `--
> > usb_mass_storage.lun0
> > usb_mass_s 2 [ + ] usb_mass_storage | `--
> > usb_mass_storage
> > blk 5 [ ] usb_storage_blk | `--
> > usb_mass_storage.lun0
> >
> > For of these storage devices we try to create the same device path which
> > is not allowable:
> >
> > => usb start
> > starting USB...
> > Bus usb@1: scanning bus usb@1 for devices... 5 USB Device(s) found
> > scanning usb for storage devices... 3 Storage Device(s) found
> > =>
> > => efidebug dh
> > Scanning disk mmc2.blk...
> > handle 0000000015e34f00,
> > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(2)/SD(0)
> > Scanning disk mmc1.blk...
> > handle 0000000015e36b30,
> > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(1)
> > Scanning disk mmc0.blk...
> > handle 0000000015e35b00,
> > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(2)
> > Scanning disk usb_mass_storage.lun0...
> > handle 0000000015e35c10,
> > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x1234,0x5678,0x9,0x0,0x0)/UsbClass(0x1234,0x5678,0x0,0x0,0x0)
> > fs_devread read outside partition 2
> > Failed to mount ext2 filesystem...
> > BTRFS: superblock end 69632 is larger than device size 512
> > Scanning disk usb_mass_storage.lun0...
> > handle 0000000015e361f0,
> > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/UsbClass(0x1234,0x5678,0x9,0x0,0x0)/UsbClass(0x1234,0x5678,0x0,0x0,0x0)
> > ERROR: failure to add disk device usb_mass_storage.lun0, r = 20
> > Error: Cannot initialize UEFI sub-system, r = 20
> >
> > I will provide a patch that will allow the first USB device to be used
> > and avoids stopping the boot process. But we really have to walk the dm
> > tree to create a device patch for USB devices based on port IDs.
> >
> > We should add a new field to struct uclass_driver:
> >
> > struct efi_device_path *get_node(udevice *dev);
> >
> > This function shall return a pointer to an freshly allocated buffer with
> > the device node for the device. To build the devicepath we can then walk
> > the dm tree.
>
> I'm not sure this is an acceptable solution.
>
> Let me make sure:
> The goal would be to create a device path like
> .../USB(0x1,0x0)/HD(1,...)
> instead of
> .../UsbHub(0x0,0x0,0x0,0x3)/UsbMassStorage(0x46f4,0x1,0x0,0x0)/HD(1,...)
> as we already see this format for SCSI:
> .../Scsi(0,0)/HD(1,..)
>
> Right?
Please try the tweak attached below.
(I think what I did here is trivial.)
If you like, I will post it as a patch.
(See "10.3.4.5.1 USB Device Path Example".)
-Takahiro Akashi
>>> From cda91e9d8144f89f0d73738b338289a7940bbe0e Mon Sep 17 00:00:00 2001
>>> From: AKASHI Takahiro <takahiro.aka...@linaro.org>
>>> Date: Thu, 25 Nov 2021 14:20:08 +0900
>>> Subject: [PATCH] efi_loader: disk: usb mass-storage
- use path_usb instead of path_usb_class for existing USB dp nodes
- add a dp node for UCLASS_USB
=> usb start
starting USB...
Bus xhci_pci: Register 8001040 NbrPorts 8
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 4 USB Device(s) found
scanning usb for storage devices... 2 Storage Device(s) found
=> dm tree
Class Index Probed Driver Name
-----------------------------------------------------------
root 0 [ + ] root_driver root_driver
...
pci 0 [ + ] pci_generic_ecam |-- pcie@10000000
pci_generi 0 [ ] pci_generic_drv | |-- pci_0:0.0
virtio 32 [ + ] virtio-pci.l | |-- virtio-pci.l#0
ethernet 0 [ + ] virtio-net | | `-- virtio-net#32
usb 0 [ + ] xhci_pci | `-- xhci_pci
usb_hub 0 [ + ] usb_hub | `-- usb_hub
usb_dev_ge 0 [ + ] usb_dev_generic_drv | |--
generic_bus_0_dev_2
usb_mass_s 0 [ + ] usb_mass_storage | |-- usb_mass_storage
blk 0 [ ] usb_storage_blk | | `--
usb_mass_storage.lun0
usb_mass_s 1 [ + ] usb_mass_storage | `-- usb_mass_storage
blk 1 [ ] usb_storage_blk | `--
usb_mass_storage.lun0
...
=> efidebug devices
Scanning disk usb_mass_storage.lun0...
Scanning disk usb_mass_storage.lun0...
Found 6 disks
Missing RNG device for EFI_RNG_PROTOCOL
** Unable to read file ubootefi.var **
Failed to load EFI variables
Unable to find TPMv2 device
Device Device Path
================ ====================
000000013eef3a50 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)
000000013eefe840
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0xf3,0x0)/USB(0x0,0x0)/USB(0x2,0x0)
000000013eefe990
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0xf3,0x0)/USB(0x0,0x0)/USB(0x2,0x0)/HD(1,0x01,0,0x0,0x99800)
000000013eefeae0
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0xf3,0x0)/USB(0x0,0x0)/USB(0x2,0x0)/HD(2,0x01,0,0x99800,0x1800)
000000013eeff5f0
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0xf3,0x0)/USB(0x0,0x0)/USB(0x3,0x0)
000000013eeff990
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0xf3,0x0)/USB(0x0,0x0)/USB(0x3,0x0)/HD(1,GPT,ce86c5a7-b32a-488f-a346-88fe698e0edc,0x22,0x4c2a)
000000013eeffda0
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0xf3,0x0)/USB(0x0,0x0)/USB(0x3,0x0)/HD(2,GPT,aa80aab9-33e6-42b6-b5db-def2cb8d7844,0x5000,0x1a800)
000000013ef00270
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/MAC(525252525252,1)
Signed-off-by: AKASHI Takahiro <takahiro.aka...@linaro.org>
---
lib/efi_loader/efi_device_path.c | 36 ++++++++++++++++++++++--
lib/efi_loader/efi_device_path_to_text.c | 17 ++++++++---
2 files changed, 47 insertions(+), 6 deletions(-)
diff --git a/lib/efi_loader/efi_device_path.c b/lib/efi_loader/efi_device_path.c
index 735ed0bd0f4c..a8ec6809c422 100644
--- a/lib/efi_loader/efi_device_path.c
+++ b/lib/efi_loader/efi_device_path.c
@@ -557,10 +557,18 @@ __maybe_unused static unsigned int dp_size(struct udevice
*dev)
return dp_size(dev->parent) +
sizeof(struct efi_device_path_sd_mmc_path);
#endif
+#if 1
+ case UCLASS_USB:
+ case UCLASS_USB_HUB:
+ case UCLASS_MASS_STORAGE:
+ return dp_size(dev->parent) +
+ sizeof(struct efi_device_path_usb);
+#else
case UCLASS_MASS_STORAGE:
case UCLASS_USB_HUB:
return dp_size(dev->parent) +
sizeof(struct efi_device_path_usb_class);
+#endif
default:
/* just skip over unknown classes: */
return dp_size(dev->parent);
@@ -740,6 +748,24 @@ __maybe_unused static void *dp_fill(void *buf, struct
udevice *dev)
return &sddp[1];
}
#endif
+#if 1
+ case UCLASS_USB:
+ case UCLASS_USB_HUB:
+ case UCLASS_MASS_STORAGE: {
+ struct efi_device_path_usb *udp =
+ dp_fill(buf, dev->parent);
+ struct usb_device *udev = dev_get_parent_priv(dev);
+
+ udp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
+ udp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_USB;
+ udp->dp.length = sizeof(*udp);
+ udp->parent_port_number = udev->portnr;
+ /* TODO: see usb_new_device() */
+ udp->usb_interface = 0;
+
+ return &udp[1];
+ }
+#else
case UCLASS_MASS_STORAGE:
case UCLASS_USB_HUB: {
struct efi_device_path_usb_class *udp =
@@ -750,14 +776,20 @@ __maybe_unused static void *dp_fill(void *buf, struct
udevice *dev)
udp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE;
udp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_USB_CLASS;
udp->dp.length = sizeof(*udp);
- udp->vendor_id = desc->idVendor;
- udp->product_id = desc->idProduct;
+#if 1
+ if (dev->driver->id == UCLASS_MASS_STORAGE)
+ udp->device_class = 8;
+ else if (dev->driver->id == UCLASS_USB_HUB)
+ udp->device_class = 9;
+#else
udp->device_class = desc->bDeviceClass;
+#endif
udp->device_subclass = desc->bDeviceSubClass;
udp->device_protocol = desc->bDeviceProtocol;
return &udp[1];
}
+#endif
default:
debug("%s(%u) %s: unhandled device class: %s (%u)\n",
__FILE__, __LINE__, __func__,
diff --git a/lib/efi_loader/efi_device_path_to_text.c
b/lib/efi_loader/efi_device_path_to_text.c
index 57fa9d97f712..a21de4157307 100644
--- a/lib/efi_loader/efi_device_path_to_text.c
+++ b/lib/efi_loader/efi_device_path_to_text.c
@@ -158,10 +158,19 @@ static char *dp_msging(char *s, struct efi_device_path
*dp)
struct efi_device_path_usb_class *ucdp =
(struct efi_device_path_usb_class *)dp;
- s += sprintf(s, "UsbClass(0x%x,0x%x,0x%x,0x%x,0x%x)",
- ucdp->vendor_id, ucdp->product_id,
- ucdp->device_class, ucdp->device_subclass,
- ucdp->device_protocol);
+ if (ucdp->device_class == 8)
+ s += sprintf(s, "UsbMassStorage(0x%x,0x%x,0x%x,0x%x)",
+ ucdp->vendor_id, ucdp->product_id,
+ ucdp->device_subclass, ucdp->device_protocol);
+ else if (ucdp->device_class == 9)
+ s += sprintf(s, "UsbHub(0x%x,0x%x,0x%x,0x%x)",
+ ucdp->vendor_id, ucdp->product_id,
+ ucdp->device_subclass, ucdp->device_protocol);
+ else
+ s += sprintf(s, "UsbClass(0x%x,0x%x,0x%x,0x%x,0x%x)",
+ ucdp->vendor_id, ucdp->product_id,
+ ucdp->device_class, ucdp->device_subclass,
+ ucdp->device_protocol);
break;
}
--
2.33.0
