Hi Marek,
On 11/13/21 3:25 AM, Marek Vasut wrote:
Add script to read U-Boot from SD card and write it to matching
locations in the SPI NOR, thus making the SPI NOR bootable. The
script erases the entire SPI NOR, including U-Boot environment,
to make sure the installation is clean. To retain environment
from current running U-Boot, run 'saveenv' after running the
'update_sf' script.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
---
include/configs/stm32mp15_dh_dhsom.h | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/include/configs/stm32mp15_dh_dhsom.h
b/include/configs/stm32mp15_dh_dhsom.h
index bac9e8388a7..b68e153f10b 100644
--- a/include/configs/stm32mp15_dh_dhsom.h
+++ b/include/configs/stm32mp15_dh_dhsom.h
@@ -9,7 +9,17 @@
#define __CONFIG_STM32MP15_DH_DHSOM_H__
#define STM32MP_BOARD_EXTRA_ENV \
- "usb_pgood_delay=1000\0"
+ "usb_pgood_delay=1000\0" \
+ "update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \
+ "setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \
+ "load mmc 0:4 ${loadaddr1} /boot/u-boot-spl.stm32 && " \
+ "env set filesize1 ${filesize} && " \
+ "load mmc 0:4 ${loadaddr} /boot/u-boot.itb && " \
+ "sf probe && sf erase 0 0x200000 && " \
+ "sf update ${loadaddr1} 0 ${filesize1} && " \
+ "sf update ${loadaddr1} 0x40000 ${filesize1} && " \
+ "sf update ${loadaddr} 0x80000 ${filesize} && " \
+ "env set filesize1 && env set loadaddr1\0"
#include <configs/stm32mp15_common.h>
Reviewed-by: Patrick Delaunay <patrick.delau...@foss.st.com>
Thanks
Patrick
