Kumar, >> Signed-off-by: Andre Schwarz<andre.schw...@matrix-vision.de> >> --- >> arch/powerpc/cpu/mpc83xx/cpu_init.c | 2 +- >> 1 files changed, 1 insertions(+), 1 deletions(-) >> > This doesn't seem quite right, the MPC837x has USB controllers. > > - k >
yes, it has - and it is working fine. But USB register range 0x00-0xff is reserved and hangs the CPU. With this patch USB is working fine on at least MPC8377. >> diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c >> b/arch/powerpc/cpu/mpc83xx/cpu_init.c >> index 7a1cae7..cfead18 100644 >> --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c >> +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c >> @@ -327,7 +327,7 @@ void cpu_init_f (volatile immap_t * im) >> im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR; >> #endif >> #ifdef CONFIG_USB_EHCI_FSL >> -#ifndef CONFIG_MPC834x >> +#if !defined(CONFIG_MPC834x)&& !defined(CONFIG_MPC837x) >> uint32_t temp; >> struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB_ADDR; >> >> -- >> 1.7.0.4 >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot >> > Regards, André MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot