Allow the dm driver be omitted by SPL.
Cc: Quentin Schulz <foss+u-b...@0leil.net>
Signed-off-by: Quentin Schulz <quentin.sch...@theobroma-systems.com>
---
drivers/power/pmic/Kconfig | 14 ++++++++++++++
drivers/power/pmic/Makefile | 2 +-
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index b9fda428df..ce0adb18a4 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -128,6 +128,20 @@ config DM_PMIC_FAN53555
The driver implements read/write operations for use with the FAN53555
regulator driver and binds the regulator driver to its node.
+config SPL_DM_PMIC_FAN53555
+ bool "Enable support for OnSemi FAN53555 in SPL"
+ depends on SPL_DM_REGULATOR && SPL_DM_I2C
+ select SPL_DM_REGULATOR_FAN53555
+ help
+ This config enables implementation of driver-model PMIC
+ uclass features for the FAN53555 regulator. The FAN53555 is
+ a (family of) single-output regulators that supports
+ transitioning between two different output voltages based on
+ an voltage selection pin.
+
+ The driver implements read/write operations for use with the FAN53555
+ regulator driver and binds the regulator driver to its node.
+
config DM_PMIC_MP5416
bool "Enable Driver Model for PMIC MP5416"
help
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index e1922df00f..401cde32cf 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -4,7 +4,7 @@
# Lukasz Majewski <l.majew...@samsung.com>
obj-$(CONFIG_$(SPL_TPL_)DM_PMIC) += pmic-uclass.o
-obj-$(CONFIG_DM_PMIC_FAN53555) += fan53555.o
+obj-$(CONFIG_$(SPL_)DM_PMIC_FAN53555) += fan53555.o
obj-$(CONFIG_$(SPL_)DM_PMIC_DA9063) += da9063.o
obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
--
2.33.1
