Hi Tom, On Mon, Nov 8, 2021 at 9:18 PM Tom Rini <tr...@konsulko.com> wrote: > > On Tue, Nov 02, 2021 at 07:35:52PM +0530, Sinthu Raja wrote: > > > From: Sinthu Raja <sinthu.r...@ti.com> > > > > J721E Starter Kit (SK)[1] is a low cost, small form factor board designed > > for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high > > performance vision accelerators, video codec accelerators, latest C71x > > and C66x DSP, high bandwidth real-time IPs for capture and display, GPU, > > dedicated safety island and security accelerators. The SoC is power > > optimized to provide best in class performance for industrial and > > automotive applications. > > > > J721E SK supports the following interfaces: > > * 4 GB LPDDR4 RAM > > * x1 Gigabit Ethernet interface > > * x1 USB 3.0 Type-C port > > * x3 USB 3.0 Type-A ports > > * x1 PCIe M.2 E Key > > * x1 PCIe M.2 M Key > > * 512 Mbit OSPI flash > > * x2 CSI2 Camera interface (RPi and TI Camera connector) > > * 40-pin Raspberry Pi GPIO header > > > > Add A72 specific dts for J721E-SK. > > > > [1] https://www.ti.com/tool/SK-TDA4VM > > > > Signed-off-by: Sinthu Raja <sinthu.r...@ti.com> > > --- > > > > Changes in V2: > > * J721E EAIK board name is changed to J721E SK, rename all occurrences of > > eaik > > to sk. > > * Rename file from eaik to sk. > > > > arch/arm/dts/Makefile | 3 +- > > arch/arm/dts/k3-j721e-sk-u-boot.dtsi | 280 ++++++++++ > > arch/arm/dts/k3-j721e-sk.dts | 791 +++++++++++++++++++++++++++ > > 3 files changed, 1073 insertions(+), 1 deletion(-) > > create mode 100644 arch/arm/dts/k3-j721e-sk-u-boot.dtsi > > create mode 100644 arch/arm/dts/k3-j721e-sk.dts > > Has arch/arm/dts/k3-j721e-sk.dts been queued up in linux-next or similar > yet?
Yes, this is queued in linux-next [1]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/ti/k3-j721e-sk.dts Regards, Sinthu Raja. > > -- > Tom -- With Regards Sinthu Raja
