On Fri, Nov 05, 2021 at 07:37:02PM +0100, Heinrich Schuchardt wrote:
> On 11/5/21 17:12, Simon Glass wrote:
> > Hi,
> >
> > On Fri, 5 Nov 2021 at 08:21, Tom Rini <tr...@konsulko.com> wrote:
> > >
> > > On Fri, Nov 05, 2021 at 12:14:47PM +0100, Stefan Roese wrote:
> > > > Hi Andre,
> > > >
> > > > Added Tom to Cc.
> > > >
> > > > On 05.11.21 11:04, Andre Przywara wrote:
> > > > > On Thu, 4 Nov 2021 20:02:41 -0600
> > > > > Simon Glass <s...@chromium.org> wrote:
> > > > >
> > > > > Hi,
> > > > >
> > > > > > On Thu, 4 Nov 2021 at 19:22, Stefan Roese <s...@denx.de> wrote:
> > > > > > >
> > > > > > > Hi Andre,
> > > > > > >
> > > > > > > On 05.11.21 00:11, Andre Przywara wrote:
> > > > > > > > On Thu, 4 Nov 2021 11:37:57 +0100
> > > > > > > > Stefan Roese <s...@denx.de> wrote:
> > > > > > > >
> > > > > > > > Hi Stefan,
> > > > > > > > > On 04.11.21 04:55, Samuel Holland wrote:
> > > > > > > > > > This series hooks up the watchdog uclass to automatically
> > > > > > > > > > register
> > > > > > > > > > watchdog devices for use with sysreset, doing a bit of
> > > > > > > > > > minor cleanup
> > > > > > > > > > along the way.
> > > > > > > > > >
> > > > > > > > > > The goal is for this to replace the sunxi board-level
> > > > > > > > > > non-DM reset_cpu()
> > > > > > > > > > function. I was surprised to find that the wdt_reboot
> > > > > > > > > > driver requires
> > > > > > > > > > its own undocumented device tree node, which references the
> > > > > > > > > > watchdog
> > > > > > > > > > device by phandle. This is problematic for us, because
> > > > > > > > > > sunxi-u-boot.dtsi
> > > > > > > > > > file covers 20 different SoCs with varying watchdog node
> > > > > > > > > > phandle names.
> > > > > > > > > > So it would have required adding a -u-boot.dtsi file for
> > > > > > > > > > each board.
> > > > > > > > > >
> > > > > > > > > > Hooking things up automatically makes sense to me; this is
> > > > > > > > > > what Linux
> > > > > > > > > > does. However, I put the code behind a new option to avoid
> > > > > > > > > > surprises for
> > > > > > > > > > other platforms.
> > > > > > > > > >
> > > > > > > > > > Changes in v3:
> > > > > > > > > > - Move condition to wdt-uclass.c to fix build errors.
> > > > > > > > > > - Include watchdog name in error message.
> > > > > > > > > >
> > > > > > > > > > Changes in v2:
> > > > > > > > > > - Extend the "if SYSRESET" block to the end of the
> > > > > > > > > > file.
> > > > > > > > > > - Also make gpio_reboot_probe function static.
> > > > > > > > > > - Rebase on top of 492ee6b8d0e7 (now handle all
> > > > > > > > > > watchdogs).
> > > > > > > > > > - Added patches 5-6 as an example of how the new
> > > > > > > > > > option will be used.
> > > > > > > > > >
> > > > > > > > > > Samuel Holland (6):
> > > > > > > > > > sysreset: Add uclass Kconfig dependency to drivers
> > > > > > > > > > sysreset: Mark driver probe functions as static
> > > > > > > > > > sysreset: watchdog: Move watchdog reference to plat
> > > > > > > > > > data
> > > > > > > > > > watchdog: Automatically register device with sysreset
> > > > > > > > > > sunxi: Avoid duplicate reset_cpu with SYSRESET enabled
> > > > > > > > > > sunxi: Use sysreset framework for poweroff/reset
> > > > > > > > > >
> > > > > > > > > > arch/arm/Kconfig | 3 +++
> > > > > > > > > > arch/arm/mach-sunxi/board.c | 2 ++
> > > > > > > > > > drivers/sysreset/Kconfig | 11 ++++++--
> > > > > > > > > > drivers/sysreset/sysreset_gpio.c | 2 +-
> > > > > > > > > > drivers/sysreset/sysreset_resetctl.c | 2 +-
> > > > > > > > > > drivers/sysreset/sysreset_syscon.c | 2 +-
> > > > > > > > > > drivers/sysreset/sysreset_watchdog.c | 40
> > > > > > > > > > ++++++++++++++++++++++------
> > > > > > > > > > drivers/watchdog/wdt-uclass.c | 8 ++++++
> > > > > > > > > > include/sysreset.h | 10 +++++++
> > > > > > > > > > 9 files changed, 67 insertions(+), 13 deletions(-)
> > > > > > > > >
> > > > > > > > > Applied to u-boot-marvell
> > > > > > > >
> > > > > > > > Mmmh, why u-boot-marvell,
> > > > > > >
> > > > > > > Because I'm handling watchdog related changed since a few years
> > > > > > > and we
> > > > > > > did not create a specific subsystem repo for this and I'm usually
> > > > > > > using my "marvell" one for this.
> > >
> > > And fwiw, there's a few other cases like this. If it's too confusing,
> > > maybe we should just roll out a few more repositories, I think it's
> > > easier to do that now than pre-gitlab?
> > >
> > > > > > > > and why did this end up already in master?
> > > > > > > > Isn't that material for the next merge window? After all this
> > > > > > > > changes
> > > > > > > > quite a bit, for a lot of boards, and I did not have a closer
> > > > > > > > look at
> > > > > > > > the sunxi parts yet.
> > > > > > >
> > > > > > > I was hesitating also a bit. But since this patchset is on the
> > > > > > > list in
> > > > > > > v1 since over 2 months now (2021-08-21) I thought it was "ready"
> > > > > > > for
> > > > > > > inclusion now. We are at -rc1 and I think we still have enough
> > > > > > > time to
> > > > > > > fix any resulting problems in this release cycle.
> > > > >
> > > > > Why do we have the merge window then? This is clearly not a
> > > > > regression or
> > > > > general fix.
> > > >
> > > > AFAIU, we are a bit less strict here in U-Boot. Patches that were posted
> > > > before the merge-window and skipped the review process (most likely
> > > > because of lack of time) are often still integrated in the early rcX
> > > > cycles. At least this is how I handle it usually.
> > > >
> > > > Tom, is my understanding here correct?
> > >
> > > Yes. We are not as strict as the kernel is about what can come in
> > > between rc1 and rc2 (and to a certain degree, post rc2). I leave things
> > > up to the discretion of the custodians. People tend of have less time
> > > to handle U-Boot changes than other stuff, so I try and be flexible in
> > > picking things up.
> > >
> > > > > > Yes I agree, that should be plenty of time for people to review it.
> > > > >
> > > > > Well, if there would be people to review the sunxi parts :-(
> > > > > I am totally fine with the generic patches (as they have been
> > > > > reviewed),
> > > > > but the sunxi integration is somewhat risky.
> > > > > I was explicitly deprioritising that in my queue, as it really doesn't
> > > > > change, add or fix anything, it's mere refactoring, from the user's
> > > > > point
> > > > > of view.
> > > > >
> > > > > > > Do you see any specific issues?
> > > > >
> > > > > Patch 6/6 changes the config for all 157 Allwinner boards, so I think
> > > > > that
> > > > > deserves at least some testing, *before* merging it.
> > > >
> > > > I expect that Samuel did some testing. But still, I agree that it
> > > > would be much better, if these patches - especially the Allwinner parts
> > > > got more extensive testing.
> > > >
> > > > > I will do as much testing now as possible, but I am not happy about
> > > > > that
> > > > > situation.
> > > >
> > > > Understood. Should we revert patch 6/6 for now?
> > >
> > > FWIW, given Samuel has been doing a number of allwinner changes, I had
> > > also assumed it was sufficiently tested, which is why I didn't raise a
> > > further concern when I saw the widespread nature of the overall changes,
> > > just figured it was a few more ready-to-go cleanups that weren't quite
> > > picked up in time. Please do speak up if you want me to revert the last
> > > part.
> >
> > Also it is often true that people find problems by testing on master
> > so applying it helps to shake the tree a bit.
> >
> > Regards,
> > Simon
> >
>
> We don't actually have a problem with this series but with a previous
> watchdog patch. The culprit according to bisecting is:
>
> b147bd3607f8 ("sunxi: Enable watchdog timer support by default")
>
> When booting the OrangePi PC the watchdog triggers while Linux is booting,
> ca. 16 s after leaving the UEFI subsystem. This matches WDT_MAX_TIMEOUT in
> drivers/watchdog/sunxi_wdt.c.
>
> If I run
>
> => wdt dev watchdog@1c20ca0
> => wdt stop
>
> before the bootefi command booting succeeds.
>
> We don't disarm the watchdog and Linux does not do it for us in time.
>
> The UEFI specification requires that the default watchdog reset time is 300
> s. We should never arm the Sunxi hardware watchdog except within the
> watchdog reset driver.
>
> The solution is to disable CONFIG_WATCHDOG_AUTOSTART on SUNXI. See
>
> [PATCH 1/1] watchdog: don't autostart watchdog on Sunxi boards
> https://lists.denx.de/pipermail/u-boot/2021-November/466318.htmlThis means we never did come up with a satisfactory to everyone solution to what UEFI thinks a watchdog should do, and what other types of deployment think a watchdog should do, yes? -- Tom
signature.asc
Description: PGP signature
