On Tue, Oct 12, 2021 at 09:07:32PM -0500, Samuel Holland wrote:
> Some boards need to change the tx/rx delay config in order for
> gigabit Ethernet to work.
>
> In Linux commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx
> delay config"), Realtek documented the bits for overriding the delays
> from the hardware straps.
>
> Copy the logic from linux, so the delay config is set from the PHY's
> interface type (the phy-mode property in the device tree).
>
> This removes the need for a one-off workaround for the Pine A64+ board.
>
> Signed-off-by: Samuel Holland <sam...@sholland.org>
> ---
> This change is needed for the Allwinner D1 Nezha board, which has
> incorrect hardware straps.OK, so this breaks my pine64+. It's the 1GB memory model from the original Kickstarter with an 8211e on it. My dhcp just times out now, with this applied. Let me know if there's some specifics you want me to try for debug or talk to me off-list and I can try and setup access to the board for you. -- Tom
signature.asc
Description: PGP signature
