On Tue, Oct 5, 2021 at 7:35 AM Adam Ford <aford...@gmail.com> wrote:
>
> On Mon, Sep 20, 2021 at 11:14 AM Adam Ford <aford...@gmail.com> wrote:
> >
> > There are three boards from Beacon, RZ/G2 M/N/H which all
> > use the same board file, but different device trees.
> > Add code to automatically select the proper device tree
> > based on the CPU type.
> >
> > Signed-off-by: Adam Ford <aford...@gmail.com>
>
> Marek,
>
> You previously asked me to remind you after 2 weeks, so it doesn't get
> too stale. I rebased at the time I did the V2. Can you give
> feedback?
Marek,
Ping #2. It's been three weeks since my last ping, and I was hoping
you might have some feedback and/or be able to apply this.
thank you,
adam
>
> thank you,
>
> adam
> > ---
> > board/beacon/beacon-rzg2m/beacon-rzg2m.c | 16 ++++++++++++++++
> > 1 file changed, 16 insertions(+)
> >
> > diff --git a/board/beacon/beacon-rzg2m/beacon-rzg2m.c
> > b/board/beacon/beacon-rzg2m/beacon-rzg2m.c
> > index c12ff77fb2..b3521fcbc1 100644
> > --- a/board/beacon/beacon-rzg2m/beacon-rzg2m.c
> > +++ b/board/beacon/beacon-rzg2m/beacon-rzg2m.c
> > @@ -36,3 +36,19 @@ void reset_cpu(void)
> > {
> > writel(RST_CODE, RST_CA57RESCNT);
> > }
> > +
> > +#if IS_ENABLED(CONFIG_MULTI_DTB_FIT)
> > +int board_fit_config_name_match(const char *name)
> > +{
> > + if (!strcmp(rzg_get_cpu_name(), "R8A774A1") && !strcmp(name,
> > "r8a774a1-beacon-rzg2m-kit"))
> > + return 0;
> > +
> > + if (!strcmp(rzg_get_cpu_name(), "R8A774B1") && !strcmp(name,
> > "r8a774b1-beacon-rzg2n-kit"))
> > + return 0;
> > +
> > + if (!strcmp(rzg_get_cpu_name(), "R8A774E1") && !strcmp(name,
> > "r8a774e1-beacon-rzg2h-kit"))
> > + return 0;
> > +
> > + return -1;
> > +}
> > +#endif
> > --
> > 2.25.1
> >
