On Wednesday 27 October 2021 07:09:42 Stefan Roese wrote:
> On 26.10.21 20:48, Pali Rohár wrote:
> > On Tuesday 26 October 2021 16:21:02 Stefan Roese wrote:
> > > On 26.10.21 14:40, Pali Rohár wrote:
> > > > My another guess there could be a problem is usage of stack. Maybe it is
> > > > possible that register with stack pointer is not initialized after the
> > > > full transfer when going to execute main image. Same arm baudrate change
> > > > code is used after the SPL and before main U-Boot, and the first
> > > > instruction is "push". Maybe modifying the arm code to not use stack
> > > > when switching the baudrate back to 115200 could also help. I will look
> > > > at it.
> > >
> > > Thanks.
> >
> > Here is dirty hack patch which completely disable calling code for
> > changing baudrate back to 115200 on ARM side:
> >
> > diff --git a/tools/kwboot.c b/tools/kwboot.c
> > index 5f4ff673972e..00d58a239c71 100644
> > --- a/tools/kwboot.c
> > +++ b/tools/kwboot.c
> > @@ -1070,17 +1070,17 @@ kwboot_xmodem(int tty, const void *_img, size_t
> > size, int baudrate)
> > return rc;
> > if (baudrate) {
> > - char buf[sizeof(kwb_baud_magic)];
> > -
> > - kwboot_printv("Waiting 1s for baudrate change magic\n");
> > - rc = kwboot_tty_recv(tty, buf, sizeof(buf), 1000);
> > - if (rc)
> > - return rc;
> > -
> > - if (memcmp(buf, kwb_baud_magic, sizeof(buf))) {
> > - errno = EPROTO;
> > - return -1;
> > - }
> > +// char buf[sizeof(kwb_baud_magic)];
> > +//
> > +// kwboot_printv("Waiting 1s for baudrate change magic\n");
> > +// rc = kwboot_tty_recv(tty, buf, sizeof(buf), 1000);
> > +// if (rc)
> > +// return rc;
> > +//
> > +// if (memcmp(buf, kwb_baud_magic, sizeof(buf))) {
> > +// errno = EPROTO;
> > +// return -1;
> > +// }
> > kwboot_printv("\nChanging baudrate back to 115200 Bd\n\n");
> > rc = kwboot_tty_change_baudrate(tty, 115200);
> > @@ -1551,8 +1551,8 @@ kwboot_img_patch(void *img, size_t *size, int
> > baudrate)
> > * This code is appended after the data part of the image and
> > * execaddr is changed to execute this code before U-Boot
> > proper.
> > */
> > - kwboot_printv("Injecting code for changing baudrate back\n");
> > - _copy_baudrate_change_code(hdr, size, 1, baudrate, 115200);
> > +// kwboot_printv("Injecting code for changing baudrate back\n");
> > +// _copy_baudrate_change_code(hdr, size, 1, baudrate, 115200);
>
> I do have this here in my version as well:
>
> /* Update the 32-bit data checksum */
> *kwboot_img_csum32_ptr(img) = kwboot_img_csum32(img);
>
> /* recompute header size */
> hdrsz = kwbheader_size(hdr);
>
> So I'm using the newer version, just to be sure.
Ok, I probably generated diff against older version, but you have
figured out how to apply it.
> > /* recompute header size */
> > hdrsz = kwbheader_size(hdr);
> >
> > As main U-Boot binary on ARM resets UART, it means that baudrate is
> > properly set to 115200. Probably beginning of the U-Boot output could be
> > lost but at least console should start.
> >
> > Could you try this patch if it starts working now?
>
> Okay, applied this patch and and booting with different baudrates works
> on this board again (tested with 230400):
>
> 96 %
> [......................................................................]
> 98 %
> [......................................................................]
> 99 % [................ ]
> Done
> Finishing transfer
>
> Changing baudrate back to 115200 Bd
>
> [Type Ctrl-\ + c to quit]
>
>
> U-Boot 2021.10-00908-gc129aa2f173a-dirty (Oct 27 2021 - 07:05:39 +0200)
>
> SoC: MV78260-B0 at 1333 MHz
> I2C: ready
> DRAM: 2 GiB (667 MHz, 64-bit, ECC not enabled)
> Loading Environment from SPIFlash... SF: Detected m25p128 with page size 256
> Bytes, erase size 256 KiB, total 16 MiB
> OK
> Model: Marvell Armada XP theadorable
> ...
>
>
> Thanks,
> Stefan
Perfect! So it really looks like that issue is in the code which resets
baudrate back to the value 115200.
I have there another diff which removes usage of the stack in code which
resets baudrate back to default value:
diff --git a/tools/kwboot.c b/tools/kwboot.c
index b56c9a0c8104..8f0e50501398 100644
--- a/tools/kwboot.c
+++ b/tools/kwboot.c
@@ -1444,6 +1444,11 @@ _inject_baudrate_change_code(void *img, size_t *size,
int pre,
memcpy(code, kwboot_baud_code, codesz - 8);
*(uint32_t *)(code + codesz - 8) = cpu_to_le32(old_baud);
*(uint32_t *)(code + codesz - 4) = cpu_to_le32(new_baud);
+
+ if (!pre) {
+ *(uint32_t *)code = cpu_to_le32(0xe1a00000); /* arm nop */
+ *(uint32_t *)(code + codesz - 4*7) = cpu_to_le32(0xe12fff1e);
/* bx lr */
+ }
}
static int
Could you try to apply this change instead of my previous one?
