Hi Patrick
On 10/21/21 11:54 AM, Patrick Delaunay wrote:
> Device tree alignment with Linux kernel v5.15-rc6
> - Set {bitclock,frame}-master phandles on ST DKx
> - Add coprocessor detach mbox on stm32mp15x-dkx boards
> - Add coprocessor detach mbox on stm32mp157c-ed1 board
>
> Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
> ---
>
> arch/arm/dts/stm32mp157c-ed1.dts | 4 ++--
> arch/arm/dts/stm32mp15xx-dkx.dtsi | 12 ++++++------
> 2 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/dts/stm32mp157c-ed1.dts
> b/arch/arm/dts/stm32mp157c-ed1.dts
> index 6e89f88a17..f62b46b8dd 100644
> --- a/arch/arm/dts/stm32mp157c-ed1.dts
> +++ b/arch/arm/dts/stm32mp157c-ed1.dts
> @@ -321,8 +321,8 @@
> &m4_rproc {
> memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
> <&vdev0vring1>, <&vdev0buffer>;
> - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
> - mbox-names = "vq0", "vq1", "shutdown";
> + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
> + mbox-names = "vq0", "vq1", "shutdown", "detach";
> interrupt-parent = <&exti>;
> interrupts = <68 1>;
> status = "okay";
> diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi
> b/arch/arm/dts/stm32mp15xx-dkx.dtsi
> index 68987f64c5..8fc93b0f94 100644
> --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
> +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
> @@ -228,15 +228,15 @@
> cs42l51_tx_endpoint: endpoint@0 {
> reg = <0>;
> remote-endpoint = <&sai2a_endpoint>;
> - frame-master;
> - bitclock-master;
> + frame-master = <&cs42l51_tx_endpoint>;
> + bitclock-master = <&cs42l51_tx_endpoint>;
> };
>
> cs42l51_rx_endpoint: endpoint@1 {
> reg = <1>;
> remote-endpoint = <&sai2b_endpoint>;
> - frame-master;
> - bitclock-master;
> + frame-master = <&cs42l51_rx_endpoint>;
> + bitclock-master = <&cs42l51_rx_endpoint>;
> };
> };
> };
> @@ -478,8 +478,8 @@
> &m4_rproc {
> memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
> <&vdev0vring1>, <&vdev0buffer>;
> - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
> - mbox-names = "vq0", "vq1", "shutdown";
> + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
> + mbox-names = "vq0", "vq1", "shutdown", "detach";
> interrupt-parent = <&exti>;
> interrupts = <68 1>;
> status = "okay";
>
Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
Thanks
Patrice
