[PATCH v4 06/16] i.MX6: Enable Job ring driver model in U-Boot.

[Gaurav Jain]

i.MX6,i.MX6SX,i.MX6UL - added support for JR driver model.

removed sec_init() call, sec is initialized based on
job ring information processed from device tree.

Signed-off-by: Gaurav Jain <gaurav.j...@nxp.com>
Reviewed-by: Ye Li <ye...@nxp.com>
---
 arch/arm/mach-imx/mx6/Kconfig | 20 ++++++++++++++++++++
 arch/arm/mach-imx/mx6/soc.c   | 12 ++++++++----
 2 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index b4c8511cb8..0f40e84915 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -354,6 +354,10 @@ config TARGET_MX6SABREAUTO
        select DM_THERMAL
        select SUPPORT_SPL
        imply CMD_DM
+       select FSL_CAAM
+       select FSL_BLOB
+       select MISC
+       select ARCH_MISC_INIT
 
 config TARGET_MX6SABRESD
        bool "mx6sabresd"
@@ -364,6 +368,10 @@ config TARGET_MX6SABRESD
        select DM_THERMAL
        select SUPPORT_SPL
        imply CMD_DM
+       select FSL_CAAM
+       select FSL_BLOB
+       select MISC
+       select ARCH_MISC_INIT
 
 config TARGET_MX6SLEVK
        bool "mx6slevk"
@@ -386,6 +394,10 @@ config TARGET_MX6SXSABRESD
        select DM
        select DM_THERMAL
        select SUPPORT_SPL
+       select FSL_CAAM
+       select FSL_BLOB
+       select MISC
+       select ARCH_MISC_INIT
 
 config TARGET_MX6SXSABREAUTO
        bool "mx6sxsabreauto"
@@ -404,6 +416,10 @@ config TARGET_MX6UL_9X9_EVK
        select DM_THERMAL
        select SUPPORT_SPL
        imply CMD_DM
+       select FSL_CAAM
+       select FSL_BLOB
+       select MISC
+       select ARCH_MISC_INIT
 
 config TARGET_MX6UL_14X14_EVK
        bool "mx6ul_14x14_evk"
@@ -413,6 +429,10 @@ config TARGET_MX6UL_14X14_EVK
        select DM_THERMAL
        select SUPPORT_SPL
        imply CMD_DM
+       select FSL_CAAM
+       select FSL_BLOB
+       select MISC
+       select ARCH_MISC_INIT
 
 config TARGET_MX6UL_ENGICAM
        bool "Support Engicam GEAM6UL/Is.IoT"
diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
index aacfc854a2..fa6c3778bb 100644
--- a/arch/arm/mach-imx/mx6/soc.c
+++ b/arch/arm/mach-imx/mx6/soc.c
@@ -4,6 +4,7 @@
  * Sascha Hauer, Pengutronix
  *
  * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
  */
 
 #include <common.h>
@@ -23,7 +24,6 @@
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
 #include <dm.h>
-#include <fsl_sec.h>
 #include <imx_thermal.h>
 #include <mmc.h>
 
@@ -734,9 +734,13 @@ static void setup_serial_number(void)
 
 int arch_misc_init(void)
 {
-#ifdef CONFIG_FSL_CAAM
-       sec_init();
-#endif
+       struct udevice *dev;
+       int ret;
+
+       ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), 
&dev);
+       if (ret)
+               printf("Failed to initialize %s: %d\n", dev->name, ret);
+
        setup_serial_number();
        return 0;
 }
-- 
2.17.1