Add a devicetree file obtained from qemu for this board. This was obtained
with:
qemu-system-aarch64 -M xlnx-versal-virt -machine dumpdtb=dtb.dtb
Signed-off-by: Simon Glass <s...@chromium.org>
---
(no changes since v1)
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/xilinx-versal-virt.dts | 307 +++++++++++++++++++++++++++
configs/xilinx_versal_virt_defconfig | 1 +
3 files changed, 310 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/xilinx-versal-virt.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 44835145f4b..0a30ad327cf 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -352,7 +352,8 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
dtb-$(CONFIG_ARCH_VERSAL) += \
versal-mini.dtb \
versal-mini-emmc0.dtb \
- versal-mini-emmc1.dtb
+ versal-mini-emmc1.dtb \
+ xilinx-versal-virt.dtb
dtb-$(CONFIG_ARCH_ZYNQMP_R5) += \
zynqmp-r5.dtb
dtb-$(CONFIG_AM33XX) += \
diff --git a/arch/arm/dts/xilinx-versal-virt.dts
b/arch/arm/dts/xilinx-versal-virt.dts
new file mode 100644
index 00000000000..3712af9e7a4
--- /dev/null
+++ b/arch/arm/dts/xilinx-versal-virt.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Sample device tree for versal-virt board
+
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "xlnx-versal-virt";
+ model = "Xilinx Versal Virtual development board";
+ #address-cells = <0x02>;
+ #size-cells = <0x02>;
+ interrupt-parent = <0x8000>;
+
+ memory@0 {
+ reg = <0x00 0x00 0x00 0x8000000>;
+ device_type = "memory";
+ };
+
+ clk25 {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0x00>;
+ clock-frequency = <0x17d7840>;
+ phandle = <0x8003>;
+ };
+
+ clk125 {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0x00>;
+ clock-frequency = <0x7735940>;
+ phandle = <0x8004>;
+ };
+
+ cpus {
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a72";
+ device_type = "cpu";
+ reg = <0x00>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a72";
+ device_type = "cpu";
+ reg = <0x01>;
+ };
+ };
+
+ rtc@f12a0000 {
+ compatible = "xlnx,zynqmp-rtc";
+ reg = <0x00 0xf12a0000 0x00 0x10000>;
+ interrupt-names = "alarm\0sec";
+ interrupts = <0x00 0x8e 0x04 0x00 0x8f 0x04>;
+ };
+
+ sdhci@f1040000 {
+ compatible = "arasan,sdhci-8.9a";
+ reg = <0x00 0xf1040000 0x00 0x10000>;
+ interrupts = <0x00 0x7e 0x04>;
+ clock-names = "clk_xin\0clk_ahb";
+ clocks = <0x8003 0x8003>;
+ };
+
+ sdhci@f1050000 {
+ compatible = "arasan,sdhci-8.9a";
+ reg = <0x00 0xf1050000 0x00 0x10000>;
+ interrupts = <0x00 0x80 0x04>;
+ clock-names = "clk_xin\0clk_ahb";
+ clocks = <0x8003 0x8003>;
+ };
+
+ usb@ff9d0000 {
+ phandle = <0x8005>;
+ #size-cells = <0x02>;
+ #address-cells = <0x02>;
+ ranges;
+ clocks = <0x8003 0x8004>;
+ clock-names = "bus_clk\0ref_clk";
+ reg = <0x00 0xff9d0000 0x00 0x10000>;
+ compatible = "xlnx,versal-dwc3";
+
+ dwc3@fe200000 {
+ maximum-speed = "high-speed";
+ phandle = <0x8006>;
+ snps,mask_phy_reset;
+ snps,refclk_fladj;
+ snps,dis_u3_susphy_quirk;
+ snps,dis_u2_susphy_quirk;
+ phy-names = "usb3-phy";
+ dr_mode = "host";
+ #stream-id-cells = <0x01>;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ interrupts = <0x00 0x16 0x04>;
+ interrupt-names = "dwc_usb3";
+ reg = <0x00 0xfe200000 0x00 0x10000>;
+ compatible = "snps,dwc3";
+ };
+ };
+
+ dma@ffa80000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x00 0xffa80000 0x00 0x1000>;
+ interrupts = <0x00 0x3c 0x04>;
+ clock-names = "clk_main\0clk_apb";
+ clocks = <0x8003 0x8003>;
+ xlnx,bus-width = <0x40>;
+ };
+
+ dma@ffa90000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x00 0xffa90000 0x00 0x1000>;
+ interrupts = <0x00 0x3d 0x04>;
+ clock-names = "clk_main\0clk_apb";
+ clocks = <0x8003 0x8003>;
+ xlnx,bus-width = <0x40>;
+ };
+
+ dma@ffaa0000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x00 0xffaa0000 0x00 0x1000>;
+ interrupts = <0x00 0x3e 0x04>;
+ clock-names = "clk_main\0clk_apb";
+ clocks = <0x8003 0x8003>;
+ xlnx,bus-width = <0x40>;
+ };
+
+ dma@ffab0000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x00 0xffab0000 0x00 0x1000>;
+ interrupts = <0x00 0x3f 0x04>;
+ clock-names = "clk_main\0clk_apb";
+ clocks = <0x8003 0x8003>;
+ xlnx,bus-width = <0x40>;
+ };
+
+ dma@ffac0000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x00 0xffac0000 0x00 0x1000>;
+ interrupts = <0x00 0x40 0x04>;
+ clock-names = "clk_main\0clk_apb";
+ clocks = <0x8003 0x8003>;
+ xlnx,bus-width = <0x40>;
+ };
+
+ dma@ffad0000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x00 0xffad0000 0x00 0x1000>;
+ interrupts = <0x00 0x41 0x04>;
+ clock-names = "clk_main\0clk_apb";
+ clocks = <0x8003 0x8003>;
+ xlnx,bus-width = <0x40>;
+ };
+
+ dma@ffae0000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x00 0xffae0000 0x00 0x1000>;
+ interrupts = <0x00 0x42 0x04>;
+ clock-names = "clk_main\0clk_apb";
+ clocks = <0x8003 0x8003>;
+ xlnx,bus-width = <0x40>;
+ };
+
+ dma@ffaf0000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x00 0xffaf0000 0x00 0x1000>;
+ interrupts = <0x00 0x43 0x04>;
+ clock-names = "clk_main\0clk_apb";
+ clocks = <0x8003 0x8003>;
+ xlnx,bus-width = <0x40>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <0x01 0x0d 0x04 0x01 0x0e 0x04 0x01 0x0b 0x04 0x01
0x0a 0x04>;
+ };
+
+ gic@f9000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <0x03>;
+ reg = <0x00 0xf9000000 0x00 0x10000 0x00 0xf9080000 0x00
0x80000>;
+ interrupt-controller;
+ interrupts = <0x01 0x09 0x04>;
+ phandle = <0x8000>;
+ };
+
+ uart@ff000000 {
+ u-boot,dm-pre-reloc;
+ compatible = "arm,pl011\0arm,sbsa-uart";
+ reg = <0x00 0xff000000 0x00 0x1000>;
+ interrupts = <0x00 0x12 0x04>;
+ clock-names = "uartclk\0apb_pclk";
+ clocks = <0x8004 0x8004>;
+ current-speed = <0x1c200>;
+ };
+
+ uart@ff010000 {
+ u-boot,dm-pre-reloc;
+ compatible = "arm,pl011\0arm,sbsa-uart";
+ reg = <0x00 0xff010000 0x00 0x1000>;
+ interrupts = <0x00 0x13 0x04>;
+ clock-names = "uartclk\0apb_pclk";
+ clocks = <0x8004 0x8004>;
+ current-speed = <0x1c200>;
+ };
+
+ ethernet@ff0c0000 {
+ #size-cells = <0x00>;
+ #address-cells = <0x01>;
+ compatible = "cdns,zynqmp-gem\0cdns,gem";
+ reg = <0x00 0xff0c0000 0x00 0x1000>;
+ interrupts = <0x00 0x38 0x04 0x00 0x38 0x04>;
+ clock-names = "pclk\0hclk\0tx_clk\0rx_clk";
+ clocks = <0x8003 0x8003 0x8004 0x8004>;
+ phy-handle = <0x8002>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <0x3e8>;
+ full-duplex;
+ phandle = <0x8002>;
+ };
+ };
+
+ ethernet@ff0d0000 {
+ #size-cells = <0x00>;
+ #address-cells = <0x01>;
+ compatible = "cdns,zynqmp-gem\0cdns,gem";
+ reg = <0x00 0xff0d0000 0x00 0x1000>;
+ interrupts = <0x00 0x3a 0x04 0x00 0x3a 0x04>;
+ clock-names = "pclk\0hclk\0tx_clk\0rx_clk";
+ clocks = <0x8003 0x8003 0x8004 0x8004>;
+ phy-handle = <0x8001>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <0x3e8>;
+ full-duplex;
+ phandle = <0x8001>;
+ };
+ };
+
+ virtio_mmio@a0000e00 {
+ compatible = "virtio,mmio";
+ reg = <0x00 0xa0000e00 0x00 0x200>;
+ interrupts = <0x00 0x76 0x01>;
+ dma-coherent;
+ };
+
+ virtio_mmio@a0000c00 {
+ compatible = "virtio,mmio";
+ reg = <0x00 0xa0000c00 0x00 0x200>;
+ interrupts = <0x00 0x75 0x01>;
+ dma-coherent;
+ };
+
+ virtio_mmio@a0000a00 {
+ compatible = "virtio,mmio";
+ reg = <0x00 0xa0000a00 0x00 0x200>;
+ interrupts = <0x00 0x74 0x01>;
+ dma-coherent;
+ };
+
+ virtio_mmio@a0000800 {
+ compatible = "virtio,mmio";
+ reg = <0x00 0xa0000800 0x00 0x200>;
+ interrupts = <0x00 0x73 0x01>;
+ dma-coherent;
+ };
+
+ virtio_mmio@a0000600 {
+ compatible = "virtio,mmio";
+ reg = <0x00 0xa0000600 0x00 0x200>;
+ interrupts = <0x00 0x72 0x01>;
+ dma-coherent;
+ };
+
+ virtio_mmio@a0000400 {
+ compatible = "virtio,mmio";
+ reg = <0x00 0xa0000400 0x00 0x200>;
+ interrupts = <0x00 0x71 0x01>;
+ dma-coherent;
+ };
+
+ virtio_mmio@a0000200 {
+ compatible = "virtio,mmio";
+ reg = <0x00 0xa0000200 0x00 0x200>;
+ interrupts = <0x00 0x70 0x01>;
+ dma-coherent;
+ };
+
+ virtio_mmio@a0000000 {
+ compatible = "virtio,mmio";
+ reg = <0x00 0xa0000000 0x00 0x200>;
+ interrupts = <0x00 0x6f 0x01>;
+ dma-coherent;
+ };
+
+ chosen {
+ stdout-path = "/uart@ff000000";
+ };
+};
diff --git a/configs/xilinx_versal_virt_defconfig
b/configs/xilinx_versal_virt_defconfig
index 11598623954..f0ec2639a38 100644
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -7,6 +7,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x100000
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_SYS_MEMTEST_END=0x00001000
CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="xilinx-versal-virt"
CONFIG_CMD_FRU=y
CONFIG_DEFINE_TCM_OCM_MMAP=y
CONFIG_COUNTER_FREQUENCY=100000000
--
2.33.0.1079.g6e70778dc9-goog
