The AXP PMICs have the ability to power off the system. The existing
code for this is duplicated for each PMIC variant, and uses the legacy
non-DM "pmic_bus" interface. When SYSRESET is enabled, this can all be
replaced with a sysreset device using the DM_PMIC interface.

Since the trigger bit is the same on all PMIC variants, use the register
definitions from the oldest supported PMIC.

Signed-off-by: Samuel Holland <sam...@sholland.org>
---

Changes in v2:
 - Rebased on top of u-boot/master (axp_pmic_bind)

 drivers/power/pmic/Kconfig |  2 ++
 drivers/power/pmic/axp.c   | 49 +++++++++++++++++++++++++++++++++++++-
 2 files changed, 50 insertions(+), 1 deletion(-)

diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index 92e2ace279..b9fda428df 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -66,6 +66,8 @@ config PMIC_ACT8846
 config PMIC_AXP
        bool "Enable Driver Model for X-Powers AXP PMICs"
        depends on DM_I2C
+       select SYSRESET_CMD_POWEROFF if SYSRESET && CMD_POWEROFF
+       imply CMD_POWEROFF if SYSRESET
        help
          This config enables driver-model PMIC uclass features for
          X-Powers AXP152, AXP2xx, and AXP8xx PMICs.
diff --git a/drivers/power/pmic/axp.c b/drivers/power/pmic/axp.c
index 74c94bdb47..0f2b24a8b5 100644
--- a/drivers/power/pmic/axp.c
+++ b/drivers/power/pmic/axp.c
@@ -1,8 +1,37 @@
 // SPDX-License-Identifier: GPL-2.0+
 
+#include <axp_pmic.h>
 #include <dm.h>
+#include <dm/lists.h>
 #include <i2c.h>
 #include <power/pmic.h>
+#include <sysreset.h>
+
+#if CONFIG_IS_ENABLED(SYSRESET)
+static int axp_sysreset_request(struct udevice *dev, enum sysreset_t type)
+{
+       int ret;
+
+       if (type != SYSRESET_POWER_OFF)
+               return -EPROTONOSUPPORT;
+
+       ret = pmic_clrsetbits(dev->parent, AXP152_SHUTDOWN, 0, AXP152_POWEROFF);
+       if (ret < 0)
+               return ret;
+
+       return -EINPROGRESS;
+}
+
+static struct sysreset_ops axp_sysreset_ops = {
+       .request        = axp_sysreset_request,
+};
+
+U_BOOT_DRIVER(axp_sysreset) = {
+       .name           = "axp_sysreset",
+       .id             = UCLASS_SYSRESET,
+       .ops            = &axp_sysreset_ops,
+};
+#endif
 
 static int axp_pmic_reg_count(struct udevice *dev)
 {
@@ -16,6 +45,24 @@ static struct dm_pmic_ops axp_pmic_ops = {
        .write          = dm_i2c_write,
 };
 
+static int axp_pmic_bind(struct udevice *dev)
+{
+       int ret;
+
+       ret = dm_scan_fdt_dev(dev);
+       if (ret)
+               return ret;
+
+       if (CONFIG_IS_ENABLED(SYSRESET)) {
+               ret = device_bind_driver_to_node(dev, "axp_sysreset", 
"axp_sysreset",
+                                                dev_ofnode(dev), NULL);
+               if (ret)
+                       return ret;
+       }
+
+       return 0;
+}
+
 static const struct udevice_id axp_pmic_ids[] = {
        { .compatible = "x-powers,axp152" },
        { .compatible = "x-powers,axp202" },
@@ -33,6 +80,6 @@ U_BOOT_DRIVER(axp_pmic) = {
        .name           = "axp_pmic",
        .id             = UCLASS_PMIC,
        .of_match       = axp_pmic_ids,
-       .bind           = dm_scan_fdt_dev,
+       .bind           = axp_pmic_bind,
        .ops            = &axp_pmic_ops,
 };
-- 
2.32.0

Reply via email to