From: Michael Walle <mich...@walle.cc>
Enable support for update over EFI UpdateCapsule mechanism. This board
doesn't support setting EFI variables after ExitBootservices().
Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS.
Signed-off-by: Michael Walle <mich...@walle.cc>
Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---
Changes in v4:
- Re-based on top of imx/master.
Changes in v3:
- use CONFIG_EFI_CAPSULE_FIRMWARE_FIT instead of
CONFIG_EFI_CAPSULE_FIRMWARE_RAW
Changes in v2:
- new patch
configs/kontron_sl28_defconfig | 6 ++++++
include/configs/kontron_sl28.h | 2 ++
2 files changed, 8 insertions(+)
diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig
index e066fe87771..accd1b04006 100644
--- a/configs/kontron_sl28_defconfig
+++ b/configs/kontron_sl28_defconfig
@@ -64,6 +64,8 @@ CONFIG_FSL_CAAM=y
CONFIG_SYS_FSL_DDR3=y
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_SF=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_I2C_MUX=y
CONFIG_MMC_HS400_SUPPORT=y
@@ -95,3 +97,7 @@ CONFIG_USB_XHCI_DWC3=y
CONFIG_OF_LIBFDT_ASSUME_MASK=0x0
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_IGNORE_OSINDICATIONS=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h
index 6769592101d..4152851ba41 100644
--- a/include/configs/kontron_sl28.h
+++ b/include/configs/kontron_sl28.h
@@ -88,6 +88,8 @@
"envload=env import -d -b ${env_addr}\0" \
"install_rcw=source 20200000\0" \
"fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \
+ "dfu_alt_info=sf 0:0=u-boot-bin raw 0x210000 0x1d0000;" \
+ "u-boot-env raw 0x3e0000 0x20000\0" \
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV
--
2.26.2
