Add a configuration file "stm32mp15_st_common.h" to handle the
STMicroelectronics boards configuration and rename stm32mp1.h to
"stm32mp15_common.h" to handle the generic STM32MP15x series configuration.

The configuration file "dh_stm32mp1.h" is also renamed to
"stm32mp15_dh_dhcom" for the configuration of board based on the
dhelectronics STM32MP15x SOM.

In the STMicroelectronics board configuration the default bootcmd
"bootcmd_stm32mp" is updated to only select the extlinux file found on
SD-Card on STM32MP15x EV1 for boot from NOR device.

Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
---

 board/dhelectronics/dh_stm32mp1/Kconfig       |  2 +-
 board/dhelectronics/dh_stm32mp1/MAINTAINERS   |  2 +-
 board/engicam/stm32mp1/Kconfig                |  2 +-
 board/st/stm32mp1/Kconfig                     |  2 +-
 board/st/stm32mp1/MAINTAINERS                 |  3 +-
 .../{stm32mp1.h => stm32mp15_common.h}        | 51 ++++++++++++-------
 .../{dh_stm32mp1.h => stm32mp15_dh_dhsom.h}   |  6 +--
 include/configs/stm32mp15_st_common.h         | 46 +++++++++++++++++
 8 files changed, 87 insertions(+), 27 deletions(-)
 rename include/configs/{stm32mp1.h => stm32mp15_common.h} (78%)
 rename include/configs/{dh_stm32mp1.h => stm32mp15_dh_dhsom.h} (65%)
 create mode 100644 include/configs/stm32mp15_st_common.h

diff --git a/board/dhelectronics/dh_stm32mp1/Kconfig 
b/board/dhelectronics/dh_stm32mp1/Kconfig
index 1fc792c9d1..dc707c2753 100644
--- a/board/dhelectronics/dh_stm32mp1/Kconfig
+++ b/board/dhelectronics/dh_stm32mp1/Kconfig
@@ -7,7 +7,7 @@ config SYS_VENDOR
        default "dhelectronics"
 
 config SYS_CONFIG_NAME
-       default "dh_stm32mp1"
+       default "stm32mp15_dh_dhsom"
 
 config ENV_SECT_SIZE
        default 0x10000 if ENV_IS_IN_SPI_FLASH
diff --git a/board/dhelectronics/dh_stm32mp1/MAINTAINERS 
b/board/dhelectronics/dh_stm32mp1/MAINTAINERS
index 9ce21c3ab2..865588f5b8 100644
--- a/board/dhelectronics/dh_stm32mp1/MAINTAINERS
+++ b/board/dhelectronics/dh_stm32mp1/MAINTAINERS
@@ -6,4 +6,4 @@ F:      arch/arm/dts/stm32mp15xx-dhcom*
 F:     board/dhelectronics/dh_stm32mp1/
 F:     configs/stm32mp15_dhcom_basic_defconfig
 F:     configs/stm32mp15_dhcor_basic_defconfig
-F:     include/configs/stm32mp1.h
+F:     include/configs/stm32mp15_dh_dhsom.h
diff --git a/board/engicam/stm32mp1/Kconfig b/board/engicam/stm32mp1/Kconfig
index c800fd4e60..3802d44cef 100644
--- a/board/engicam/stm32mp1/Kconfig
+++ b/board/engicam/stm32mp1/Kconfig
@@ -7,6 +7,6 @@ config SYS_VENDOR
        default "engicam"
 
 config SYS_CONFIG_NAME
-       default "stm32mp1"
+       default "stm32mp15_common"
 
 endif
diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig
index c5ab7553d4..89e97aec2b 100644
--- a/board/st/stm32mp1/Kconfig
+++ b/board/st/stm32mp1/Kconfig
@@ -7,7 +7,7 @@ config SYS_VENDOR
        default "st"
 
 config SYS_CONFIG_NAME
-       default "stm32mp1"
+       default "stm32mp15_st_common"
 
 source "board/st/common/Kconfig"
 endif
diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS
index 0e6d80fb45..6451195269 100644
--- a/board/st/stm32mp1/MAINTAINERS
+++ b/board/st/stm32mp1/MAINTAINERS
@@ -8,4 +8,5 @@ F:      board/st/stm32mp1/
 F:     configs/stm32mp15_defconfig
 F:     configs/stm32mp15_basic_defconfig
 F:     configs/stm32mp15_trusted_defconfig
-F:     include/configs/stm32mp1.h
+F:     include/configs/stm32mp15_common.h
+F:     include/configs/stm32mp15_st_common.h
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp15_common.h
similarity index 78%
rename from include/configs/stm32mp1.h
rename to include/configs/stm32mp15_common.h
index 30d4e8ff1f..46a92a06e5 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp15_common.h
@@ -5,8 +5,8 @@
  * Configuration settings for the STM32MP15x CPU
  */
 
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __CONFIG_STM32MP15_COMMMON_H
+#define __CONFIG_STM32MP15_COMMMON_H
 #include <linux/sizes.h>
 #include <asm/arch/stm32.h>
 
@@ -104,11 +104,11 @@
        BOOT_TARGET_PXE(func)
 
 /*
- * bootcmd for stm32mp1:
+ * default bootcmd for stm32mp1:
  * for serial/usb: execute the stm32prog command
- * for mmc boot (eMMC, SD card), boot only on the same device
- * for nand or spi-nand boot, boot with on ubifs partition on UBI partition
- * for nor boot, use the default order
+ * for mmc boot (eMMC, SD card), distro boot on the same mmc device
+ * for nand or spi-nand boot, distro boot with ubifs on UBI partition
+ * for nor boot, use the default distro order in ${boot_targets}
  */
 #define STM32MP_BOOTCMD "bootcmd_stm32mp=" \
        "echo \"Boot over ${boot_device}${boot_instance}!\";" \
@@ -126,7 +126,7 @@
 
 #ifdef CONFIG_FASTBOOT_CMD_OEM_FORMAT
 /* eMMC default partitions for fastboot command: oem format */
-#define PARTS_DEFAULT \
+#define STM32MP_PARTS_DEFAULT \
        "partitions=" \
        "name=ssbl,size=2M;" \
        "name=bootfs,size=64MB,bootable;" \
@@ -134,9 +134,14 @@
        "name=rootfs,size=746M;" \
        "name=userfs,size=-\0"
 #else
-#define PARTS_DEFAULT
+#define STM32MP_PARTS_DEFAULT
 #endif
 
+#define STM32MP_EXTRA \
+       "altbootcmd=run bootcmd\0" \
+       "env_check=if env info -p -d -q; then env save; fi\0" \
+       "boot_net_usb_start=true\0"
+
 #include <config_distro_bootcmd.h>
 
 /*
@@ -144,21 +149,29 @@
  * 1M fdt, 1M script, 1M pxe and 1M for overlay
  * and the ramdisk at the end.
  */
+#define __KERNEL_ADDR_R     __stringify(0xc2000000)
+#define __FDT_ADDR_R        __stringify(0xc4000000)
+#define __SCRIPT_ADDR_R     __stringify(0xc4100000)
+#define __PXEFILE_ADDR_R    __stringify(0xc4200000)
+#define __FDTOVERLAY_ADDR_R __stringify(0xc4300000)
+#define __RAMDISK_ADDR_R    __stringify(0xc4400000)
+
+#define STM32MP_MEM_LAYOUT \
+       "kernel_addr_r=" __KERNEL_ADDR_R "\0" \
+       "fdt_addr_r=" __FDT_ADDR_R "\0" \
+       "scriptaddr=" __SCRIPT_ADDR_R "\0" \
+       "pxefile_addr_r=" __PXEFILE_ADDR_R "\0" \
+       "fdtoverlay_addr_r=" __FDTOVERLAY_ADDR_R "\0" \
+       "ramdisk_addr_r=" __RAMDISK_ADDR_R "\0"
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
-       "kernel_addr_r=0xc2000000\0" \
-       "fdt_addr_r=0xc4000000\0" \
-       "scriptaddr=0xc4100000\0" \
-       "pxefile_addr_r=0xc4200000\0" \
-       "fdtoverlay_addr_r=0xc4300000\0" \
-       "ramdisk_addr_r=0xc4400000\0" \
-       "altbootcmd=run bootcmd\0" \
-       "env_check=if env info -p -d -q; then env save; fi\0" \
+       STM32MP_MEM_LAYOUT \
        STM32MP_BOOTCMD \
-       PARTS_DEFAULT \
+       STM32MP_PARTS_DEFAULT \
        BOOTENV \
-       "boot_net_usb_start=true\0"
+       STM32MP_EXTRA
 
 #endif /* ifndef CONFIG_SPL_BUILD */
 #endif /* ifdef CONFIG_DISTRO_DEFAULTS*/
 
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_STM32MP15_COMMMON_H */
diff --git a/include/configs/dh_stm32mp1.h 
b/include/configs/stm32mp15_dh_dhsom.h
similarity index 65%
rename from include/configs/dh_stm32mp1.h
rename to include/configs/stm32mp15_dh_dhsom.h
index 89d317ba2b..c559cd72da 100644
--- a/include/configs/dh_stm32mp1.h
+++ b/include/configs/stm32mp15_dh_dhsom.h
@@ -5,10 +5,10 @@
  * Configuration settings for the DH STM32MP15x SoMs
  */
 
-#ifndef __CONFIG_DH_STM32MP1_H__
-#define __CONFIG_DH_STM32MP1_H__
+#ifndef __CONFIG_STM32MP15_DH_DHSOM_H__
+#define __CONFIG_STM32MP15_DH_DHSOM_H__
 
-#include <configs/stm32mp1.h>
+#include <configs/stm32mp15_common.h>
 
 #define CONFIG_SPL_TARGET              "u-boot.itb"
 
diff --git a/include/configs/stm32mp15_st_common.h 
b/include/configs/stm32mp15_st_common.h
new file mode 100644
index 0000000000..10248bffc1
--- /dev/null
+++ b/include/configs/stm32mp15_st_common.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (C) 2021, STMicroelectronics - All Rights Reserved
+ *
+ * Configuration settings for the STMicroelectonics STM32MP15x boards
+ */
+
+#ifndef __CONFIG_STM32MP15_ST_COMMON_H__
+#define __CONFIG_STM32MP15_ST_COMMON_H__
+
+#include <configs/stm32mp15_common.h>
+
+#ifdef CONFIG_EXTRA_ENV_SETTINGS
+/*
+ * default bootcmd for stm32mp1 STMicroelectronics boards:
+ * for serial/usb: execute the stm32prog command
+ * for mmc boot (eMMC, SD card), distro boot on the same mmc device
+ * for nand or spi-nand boot, distro boot with ubifs on UBI partition
+ * for nor boot, distro boot on SD card = mmc0 ONLY !
+ */
+#define ST_STM32MP1_BOOTCMD "bootcmd_stm32mp=" \
+       "echo \"Boot over ${boot_device}${boot_instance}!\";" \
+       "if test ${boot_device} = serial || test ${boot_device} = usb;" \
+       "then stm32prog ${boot_device} ${boot_instance}; " \
+       "else " \
+               "run env_check;" \
+               "if test ${boot_device} = mmc;" \
+               "then env set boot_targets \"mmc${boot_instance}\"; fi;" \
+               "if test ${boot_device} = nand ||" \
+                 " test ${boot_device} = spi-nand ;" \
+               "then env set boot_targets ubifs0; fi;" \
+               "if test ${boot_device} = nor;" \
+               "then env set boot_targets mmc0; fi;" \
+               "run distro_bootcmd;" \
+       "fi;\0"
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       STM32MP_MEM_LAYOUT \
+       ST_STM32MP1_BOOTCMD \
+       STM32MP_PARTS_DEFAULT \
+       BOOTENV \
+       STM32MP_EXTRA
+
+#endif
+#endif
-- 
2.25.1

Reply via email to