On Thu, 2021-09-02 at 14:08 -0300, Fabio Estevam wrote: > Hi Marcel, > > On Thu, Aug 26, 2021 at 9:14 AM Marcel Ziswiler <mar...@ziswiler.com> wrote: > > > > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > > > > > With the move to using binman to generate SPL aka u-boot-spl-ddr.bin and > > U-Boot proper aka u-boot.itb every board now covers such configuration > > in its own U-Boot specific device tree include. Introduce a new common > > imx8mm-binman.dtsi which covers the common part of that configuration. > > > > The initial patch fixes an issue with intermediate binary naming for the > > imx8mm-cl-iot-gate. And subsequent patches further clean up that dtsi. > > > > This series is based on Peng's binman conversion of late [1], my Verdin > > iMX8M Mini target refresh [2], Fabio's generating a single bootable > > flash.bin again for imx8mm-evk [3], Tim's switching imx8mm_venice to > > using binman to pack images [4] and Frieder's support for Kontron > > Electronics i.MX6UL/ULL and i.MX8MM SoMs [5]. > > > > This series has been run-time tested on Verdin iMX8M Mini. The other > > targets were only compile tested. > > > > Please note that for now, I left out the following intricacies of > > imx8mm-venice-u-boot.dtsi. Not quite sure what exactly those are used > > for. > > The series looks good.
Thanks! > We just need to find a way to not break imx8mm-venice. Yep, yep. I cleaned that up now and will send a v2 shortly. BTW: Now with 2021.10 released I hope somebody will pick up all my in-flight patch sets soon (;-p). > Thanks
