Pandora's config has various flash related macros that are either
not referenced anywhere in the code or are used by drivers that
are not enabled. Remove them.

Signed-off-by: Grazvydas Ignotas <nota...@gmail.com>
---
Alternatively this old patch can be applied to clean up more OMAP boards:
http://lists.denx.de/pipermail/u-boot/2010-April/070860.html

 include/configs/omap3_pandora.h |   20 --------------------
 1 files changed, 0 insertions(+), 20 deletions(-)

diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index b8cd2cd..f386bc4 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -261,40 +261,20 @@
 #define PISMO1_NAND_SIZE               GPMC_SIZE_128M
 #define PISMO1_ONEN_SIZE               GPMC_SIZE_128M
 
-#define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors on */
-                                               /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
 #define CONFIG_SYS_FLASH_BASE          boot_flash_base
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
 
 #define CONFIG_ENV_IS_IN_NAND          1
-#define ONENAND_ENV_OFFSET             0x240000 /* environment starts here */
 #define SMNAND_ENV_OFFSET              0x240000 /* environment starts here */
 
 #define CONFIG_SYS_ENV_SECT_SIZE       boot_flash_sec
 #define CONFIG_ENV_OFFSET              boot_flash_off
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (100 * CONFIG_SYS_HZ)
-
-/* Flash banks JFFS2 should use */
-#define CONFIG_SYS_MAX_MTD_BANKS       (CONFIG_SYS_MAX_FLASH_BANKS + \
-                                       CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND
-/* use flash_info[2] */
-#define CONFIG_SYS_JFFS2_FIRST_BANK    CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS     1
-
 #ifndef __ASSEMBLY__
 extern unsigned int boot_flash_base;
 extern volatile unsigned int boot_flash_env_addr;
-- 
1.6.3.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to