older ld emitted all ELF relocations in input sections named .rel.dyn, whereas newer ld uses names of the form .rel*. The linker script only collected .rel.dyn input sections. Rewrite to collect all .rel* input sections and overlay with .bss.
Signed-off-by: Albert Aribaud <albert.arib...@free.fr> --- V1 Initial submission V2 arm926ejs: added ALIGN between bss and .rel.dyn sections tx25: removed GOT and datarel output sections tx25: fixed typo in config file commit message V3 arm926ejs: overlaid .bss and .rel.dyn sections tx25: overlaid .bss and .rel.dyn sections V4 arm926ejs and tx25: fixed overlay tx25: removed third patch as u-boot size remains small enough arch/arm/cpu/arm926ejs/u-boot.lds | 30 ++++++++++++++++++------------ 1 files changed, 18 insertions(+), 12 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/u-boot.lds b/arch/arm/cpu/arm926ejs/u-boot.lds index 72f45f8..28c91f9 100644 --- a/arch/arm/cpu/arm926ejs/u-boot.lds +++ b/arch/arm/cpu/arm926ejs/u-boot.lds @@ -45,24 +45,30 @@ SECTIONS . = ALIGN(4); - __rel_dyn_start = .; - .rel.dyn : { *(.rel.dyn) } - __rel_dyn_end = .; - - __dynsym_start = .; - .dynsym : { *(.dynsym) } - - . = ALIGN(4); - . = .; __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } __u_boot_cmd_end = .; . = ALIGN(4); - __bss_start = .; - .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } - _end = .; + + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .dynsym : { + __dynsym_start = .; + *(.dynsym) + } + + .bss __rel_dyn_start (OVERLAY) : { + __bss_start = .; + *(.bss) + . = ALIGN(4); + _end = .; + } /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } -- 1.7.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot