On 20/09/2021 10:40, Vyacheslav Bocharov wrote: > Add support for new home automation devices manufactured by JetHome. > Patches prepared for use with the "ARM: meson: Sync Amlogic DT from Linux > 5.14" patch series by Neil Armstrong > > JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation > controller with the following features: > - DIN Rail Mounting case > - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz > - no video out > - 512Mb/1GB DDR3 > - 8/16GB eMMC flash > - 1 x USB 2.0 > - 1 x 10/100Mbps ethernet > - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, > Bluetooth 4.2. > - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and > Zigbee 3.0 support. > - 2 x gpio LEDS > - GPIO user Button > - 1 x 1-Wire > - 2 x RS-485 > - 4 x dry contact digital GPIO inputs > - 3 x relay GPIO outputs > - DC source with a voltage of 9 to 56 V / Passive POE > > JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation > controller with the following features: > - Square plastic case > - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz > - no video out > - 1GB DDR3 > - 8/16GB eMMC flash > - 2 x USB 2.0 > - 1 x 10/100Mbps ethernet > - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0. > - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and > Zigbee 3.0 support. > - MicroSD 2.x/3.x/4.x DS/HS cards. > - 1 x gpio LED > - ADC user Button > - DC source 5V microUSB with serial console > > Changes from v2: > - fix "Alignment should match open parenthesis" in > board/amlogic/jethub-j80/jethub-j80.c > - add missing files to board/amlogic/jethub-j80/MAINTAINERS > - fix unexpected unindent in doc files > > Changes from v1: > - fix BOOT_TARGET_DEVICES in jethub.h (patch 1/3) > - add lore URLs to description (patch 2/3) > > Signed-off-by: Vyacheslav Bocharov <ad...@lexina.in> > > Vyacheslav Bocharov (3): > ARM: amlogic: add JetHub common config header > ARM: amlogic: add JetHub D1/H1 device support > ARM: amlogic: add JetHub D1/H1 docs > > arch/arm/dts/Makefile | 2 + > .../arm/dts/meson-axg-jethome-jethub-j100.dts | 361 ++++++++++++++++++ > .../meson-gxl-s905w-jethome-jethub-j80.dts | 241 ++++++++++++ > board/amlogic/jethub-j80/MAINTAINERS | 9 + > board/amlogic/jethub-j80/Makefile | 6 + > board/amlogic/jethub-j80/jethub-j80.c | 68 ++++ > configs/jethub_j100_defconfig | 55 +++ > configs/jethub_j80_defconfig | 63 +++ > doc/board/amlogic/index.rst | 128 ++++--- > doc/board/amlogic/jethub-j100.rst | 108 ++++++ > doc/board/amlogic/jethub-j80.rst | 97 +++++ > include/configs/jethub.h | 40 ++ > 12 files changed, 1115 insertions(+), 63 deletions(-) > create mode 100644 arch/arm/dts/meson-axg-jethome-jethub-j100.dts > create mode 100644 arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts > create mode 100644 board/amlogic/jethub-j80/MAINTAINERS > create mode 100644 board/amlogic/jethub-j80/Makefile > create mode 100644 board/amlogic/jethub-j80/jethub-j80.c > create mode 100644 configs/jethub_j100_defconfig > create mode 100644 configs/jethub_j80_defconfig > create mode 100644 doc/board/amlogic/jethub-j100.rst > create mode 100644 doc/board/amlogic/jethub-j80.rst > create mode 100644 include/configs/jethub.h >
Applied to u-boot-amlogic-next Neil
