Hi, On 19/09/2021 17:52, Vyacheslav Bocharov wrote: > Add support for new home automation devices.
While applying I had a few warnings: > > JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation > controller with the following features: > - DIN Rail Mounting case > - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz > - no video out > - 512Mb/1GB DDR3 > - 8/16GB eMMC flash > - 1 x USB 2.0 > - 1 x 10/100Mbps ethernet > - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, > Bluetooth 4.2. > - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and > Zigbee 3.0 support. > - 2 x gpio LEDS > - GPIO user Button > - 1 x 1-Wire > - 2 x RS-485 > - 4 x dry contact digital GPIO inputs > - 3 x relay GPIO outputs > - DC source with a voltage of 9 to 56 V / Passive POE > > JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation > controller with the following features: > - Square plastic case > - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz > - no video out > - 1GB DDR3 > - 8/16GB eMMC flash > - 2 x USB 2.0 > - 1 x 10/100Mbps ethernet > - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0. > - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and > Zigbee 3.0 support. > - MicroSD 2.x/3.x/4.x DS/HS cards. > - 1 x gpio LED > - ADC user Button > - DC source 5V microUSB with serial console > > Patches from: > - JetHub H1 > https://lore.kernel.org/r/20210915085715.1134940-4-ad...@lexina.in > https://git.kernel.org/amlogic/c/abfaae24ecf3e7f00508b60fa05e2b6789b8f607 > - JetHub D1 > https://lore.kernel.org/r/20210915085715.1134940-5-ad...@lexina.in > https://git.kernel.org/amlogic/c/8e279fb2903990cc6296ec56b3b80b2f854b6c79 > > Signed-off-by: Vyacheslav Bocharov <ad...@lexina.in> > Reviewed-by: Neil Armstrong <narmstr...@baylibre.com> > --- > arch/arm/dts/Makefile | 2 + > .../arm/dts/meson-axg-jethome-jethub-j100.dts | 361 ++++++++++++++++++ > .../meson-gxl-s905w-jethome-jethub-j80.dts | 241 ++++++++++++ > board/amlogic/jethub-j80/MAINTAINERS | 6 + > board/amlogic/jethub-j80/Makefile | 6 + > board/amlogic/jethub-j80/jethub-j80.c | 68 ++++ > configs/jethub_j100_defconfig | 55 +++ > configs/jethub_j80_defconfig | 63 +++ > 8 files changed, 802 insertions(+) > create mode 100644 arch/arm/dts/meson-axg-jethome-jethub-j100.dts > create mode 100644 arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts > create mode 100644 board/amlogic/jethub-j80/MAINTAINERS > create mode 100644 board/amlogic/jethub-j80/Makefile > create mode 100644 board/amlogic/jethub-j80/jethub-j80.c > create mode 100644 configs/jethub_j100_defconfig > create mode 100644 configs/jethub_j80_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index f0160d2dc0..d1893a9812 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -169,10 +169,12 @@ dtb-$(CONFIG_ARCH_MESON) += \ > meson-gxl-s905x-libretech-cc-v2.dtb \ > meson-gxl-s905x-khadas-vim.dtb \ > meson-gxl-s905d-libretech-pc.dtb \ > + meson-gxl-s905w-jethome-jethub-j80.dtb \ > meson-gxm-khadas-vim2.dtb \ > meson-gxm-s912-libretech-pc.dtb \ > meson-gxm-wetek-core2.dtb \ > meson-axg-s400.dtb \ > + meson-axg-jethome-jethub-j100.dtb \ > meson-g12a-u200.dtb \ > meson-g12a-sei510.dtb \ > meson-g12b-gtking.dtb \ > diff --git a/arch/arm/dts/meson-axg-jethome-jethub-j100.dts > b/arch/arm/dts/meson-axg-jethome-jethub-j100.dts > new file mode 100644 > index 0000000000..5783732dc6 > --- /dev/null > +++ b/arch/arm/dts/meson-axg-jethome-jethub-j100.dts > @@ -0,0 +1,361 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2021 Vyacheslav Bocharov <ad...@lexina.in> > + * Copyright (c) 2020 JetHome > + * Author: Aleksandr Kazantsev <a...@tvip.ru> > + * Author: Alexey Shevelkin <a...@tvip.ru> > + * Author: Vyacheslav Bocharov <ad...@lexina.in> > + */ > + > +/dts-v1/; > + > +#include "meson-axg.dtsi" > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/thermal/thermal.h> > + > +/ { > + compatible = "jethome,jethub-j100", "amlogic,a113d", > "amlogic,meson-axg"; > + model = "JetHome JetHub J100"; > + aliases { > + serial0 = &uart_AO; /* Console */ > + serial1 = &uart_AO_B; /* External UART (Wireless Module) */ > + ethernet0 = ðmac; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + /* 1024MB RAM */ > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x40000000>; > + }; > + > + reserved-memory { > + linux,cma { > + size = <0x0 0x400000>; > + }; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; > + }; > + > + vcc_3v3: regulator-vcc_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vddao_3v3>; > + regulator-always-on; > + }; > + > + vcc_5v: regulator-vcc_5v { > + compatible = "regulator-fixed"; > + regulator-name = "VCC5V"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + vddao_3v3: regulator-vddao_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDAO_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc_5v>; > + regulator-always-on; > + }; > + > + vddio_ao18: regulator-vddio_ao18 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_AO18"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vddao_3v3>; > + regulator-always-on; > + }; > + > + vddio_boot: regulator-vddio_boot { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_BOOT"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vddao_3v3>; > + regulator-always-on; > + }; > + > + usb_pwr: regulator-usb_pwr { > + compatible = "regulator-fixed"; > + regulator-name = "USB_PWR"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc_5v>; > + regulator-always-on; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; > + clocks = <&wifi32k>; > + clock-names = "ext_clock"; > + }; > + > + wifi32k: wifi32k { > + compatible = "pwm-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ > + }; > + > + thermal-zones { > + cpu_thermal: cpu-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + thermal-sensors = <&scpi_sensors 0>; > + trips { > + cpu_passive: cpu-passive { > + temperature = <70000>; /* millicelsius > */ > + hysteresis = <2000>; /* millicelsius */ > + type = "passive"; > + }; > + > + cpu_hot: cpu-hot { > + temperature = <80000>; /* millicelsius > */ > + hysteresis = <2000>; /* millicelsius */ > + type = "hot"; > + }; > + > + cpu_critical: cpu-critical { > + temperature = <100000>; /* millicelsius > */ > + hysteresis = <2000>; /* millicelsius */ > + type = "critical"; > + }; > + }; > + }; > + > + cpu_cooling_maps: cooling-maps { > + map0 { > + trip = <&cpu_passive>; > + cooling-device = <&cpu0 THERMAL_NO_LIMIT > THERMAL_NO_LIMIT>, > + <&cpu1 THERMAL_NO_LIMIT > THERMAL_NO_LIMIT>, > + <&cpu2 THERMAL_NO_LIMIT > THERMAL_NO_LIMIT>, > + <&cpu3 THERMAL_NO_LIMIT > THERMAL_NO_LIMIT>; > + }; > + > + map1 { > + trip = <&cpu_hot>; > + cooling-device = <&cpu0 THERMAL_NO_LIMIT > THERMAL_NO_LIMIT>, > + <&cpu1 THERMAL_NO_LIMIT > THERMAL_NO_LIMIT>, > + <&cpu2 THERMAL_NO_LIMIT > THERMAL_NO_LIMIT>, > + <&cpu3 THERMAL_NO_LIMIT > THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + onewire { > + compatible = "w1-gpio"; > + gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; > + #gpio-cells = <1>; > + }; > +}; > + > +&efuse { > + sn: sn@32 { > + reg = <0x32 0x20>; > + }; > + > + eth_mac: eth_mac@0 { > + reg = <0x0 0x6>; > + }; > + > + bt_mac: bt_mac@6 { > + reg = <0x6 0x6>; > + }; > + > + wifi_mac: wifi_mac@c { > + reg = <0xc 0x6>; > + }; > + > + bid: bid@12 { > + reg = <0x12 0x20>; > + }; > +}; > + > +ðmac { > + status = "okay"; > + pinctrl-0 = <ð_rmii_x_pins>; > + pinctrl-names = "default"; > + phy-handle = <ð_phy0>; > + phy-mode = "rmii"; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, > model_id=0x0c54) */ > + eth_phy0: ethernet-phy@0 { > + /* compatible = "ethernet-phy-id0243.0c54";*/ > + max-speed = <100>; > + reg = <0>; > + > + reset-assert-us = <10000>; > + reset-deassert-us = <10000>; > + reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; > + }; > + }; > +}; > + > +/* Internal I2C bus (on CPU module) */ > +&i2c1 { > + status = "okay"; > + pinctrl-0 = <&i2c1_z_pins>; > + pinctrl-names = "default"; > + > + /* RTC */ > + pcf8563: pcf8563@51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + status = "okay"; > + }; > +}; > + > +/* Peripheral I2C bus (on motherboard) */ > +&i2c_AO { > + status = "okay"; > + pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; > + pinctrl-names = "default"; > +}; > + > +&pwm_ab { > + status = "okay"; > + pinctrl-0 = <&pwm_a_x20_pins>; > + pinctrl-names = "default"; > +}; > + > +/* wifi module */ > +&sd_emmc_b { > + status = "okay"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pinctrl-0 = <&sdio_pins>; > + pinctrl-1 = <&sdio_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <4>; > + cap-sd-highspeed; > + sd-uhs-sdr104; > + max-frequency = <200000000>; > + non-removable; > + disable-wp; > + > + mmc-pwrseq = <&sdio_pwrseq>; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_boot>; > + > + brcmf: wifi@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + }; > +}; > + > +/* emmc storage */ > +&sd_emmc_c { > + status = "okay"; > + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; > + pinctrl-1 = <&emmc_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <8>; > + cap-mmc-highspeed; > + max-frequency = <200000000>; > + non-removable; > + disable-wp; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + > + mmc-pwrseq = <&emmc_pwrseq>; > + > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +/* UART Bluetooth */ > +&uart_B { > + status = "okay"; > + pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; > + pinctrl-names = "default"; > + uart-has-rtscts; > + > + bluetooth { > + compatible = "brcm,bcm43438-bt"; > + shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; > + }; > +}; > + > +/* UART Console */ > +&uart_AO { > + status = "okay"; > + pinctrl-0 = <&uart_ao_a_pins>; > + pinctrl-names = "default"; > +}; > + > +/* UART Wireless module */ > +&uart_AO_B { > + status = "okay"; > + pinctrl-0 = <&uart_ao_b_pins>; > + pinctrl-names = "default"; > +}; > + > +&usb { > + status = "okay"; > + phy-supply = <&usb_pwr>; > +}; > + > +&spicc1 { > + status = "okay"; > + pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; > + pinctrl-names = "default"; > +}; > + > +&gpio { > + gpio-line-names = > + "", "", "", "", "", // 0 - 4 > + "", "", "", "", "", // 5 - 9 > + "UserButton", "", "", "", "", // 10 - 14 > + "", "", "", "", "", // 15 - 19 > + "", "", "", "", "", // 20 - 24 > + "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 > + "Output1", "", "", "", "", // 30 - 34 > + "", "ZigBeeBOOT", "", "", "", // 35 - 39 > + "", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 > + "Input2", "Input1", "", "", "", // 45 - 49 > + "", "", "", "", "", // 50 - 54 > + "", "", "", "", "", // 55 - 59 > + "", "", "", "", "", // 60 - 64 > + "", "", "", "", "", // 65 - 69 > + "", "", "", "", "", // 70 - 74 > + "", "", "", "", "", // 75 - 79 > + "", "", "", "", "", // 80 - 84 > + "", ""; // 85-86 > +}; > + > +&cpu0 { > + #cooling-cells = <2>; > +}; > + > +&cpu1 { > + #cooling-cells = <2>; > +}; > + > +&cpu2 { > + #cooling-cells = <2>; > +}; > + > +&cpu3 { > + #cooling-cells = <2>; > +}; > diff --git a/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts > b/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts > new file mode 100644 > index 0000000000..6eafb90869 > --- /dev/null > +++ b/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts > @@ -0,0 +1,241 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2021 Vyacheslav Bocharov <ad...@lexina.in> > + * Copyright (c) 2020 JetHome > + * Author: Aleksandr Kazantsev <a...@tvip.ru> > + * Author: Alexey Shevelkin <a...@tvip.ru> > + * Author: Vyacheslav Bocharov <ad...@lexina.in> > + */ > + > +/dts-v1/; > + > +#include "meson-gxl.dtsi" > + > +/ { > + compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl"; > + model = "JetHome JetHub J80"; > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x40000000>; > + }; > + > + reserved-memory { > + linux,cma { > + size = <0x0 0x1000000>; > + }; > + }; > + > + aliases { > + serial0 = &uart_AO; /* Console */ > + serial1 = &uart_A; /* Bluetooth */ > + serial2 = &uart_AO_B; /* Wireless module 1 */ > + serial3 = &uart_C; /* Wireless module 2 */ > + ethernet0 = ðmac; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + vddio_ao18: regulator-vddio_ao18 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_AO18"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vddio_boot: regulator-vddio_boot { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_BOOT"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vddao_3v3: regulator-vddao_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDAO_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vcc_3v3: regulator-vcc_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; > + }; > + > + wifi32k: wifi32k { > + compatible = "pwm-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; > + clocks = <&wifi32k>; > + clock-names = "ext_clock"; > + }; > +}; > + > +&efuse { > + bt_mac: bt_mac@6 { > + reg = <0x6 0x6>; > + }; > + > + wifi_mac: wifi_mac@C { > + reg = <0xc 0x6>; > + }; > +}; > + > +&sn { > + reg = <0x32 0x20>; > +}; > + > +ð_mac { > + reg = <0x0 0x6>; > +}; > + > +&bid { > + reg = <0x12 0x20>; > +}; > + > +&usb { > + status = "okay"; > + dr_mode = "host"; > +}; > + > +&pwm_ef { > + status = "okay"; > + pinctrl-0 = <&pwm_e_pins>; > + pinctrl-names = "default"; > + clocks = <&clkc CLKID_FCLK_DIV4>; > + clock-names = "clkin0"; > +}; > + > +&saradc { > + status = "okay"; > + vref-supply = <&vddio_ao18>; > +}; > + > +/* Wireless SDIO Module */ > +&sd_emmc_a { > + status = "okay"; > + pinctrl-0 = <&sdio_pins>; > + pinctrl-1 = <&sdio_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + bus-width = <4>; > + cap-sd-highspeed; > + max-frequency = <50000000>; > + > + non-removable; > + disable-wp; > + > + /* WiFi firmware requires power to be kept while in suspend */ > + keep-power-in-suspend; > + > + mmc-pwrseq = <&sdio_pwrseq>; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +/* SD card */ > +&sd_emmc_b { > + status = "okay"; > + pinctrl-0 = <&sdcard_pins>; > + pinctrl-1 = <&sdcard_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <4>; > + cap-sd-highspeed; > + max-frequency = <50000000>; > + disable-wp; > + > + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +/* eMMC */ > +&sd_emmc_c { > + status = "okay"; > + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; > + pinctrl-1 = <&emmc_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <8>; > + cap-mmc-highspeed; > + max-frequency = <200000000>; > + non-removable; > + disable-wp; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + > + mmc-pwrseq = <&emmc_pwrseq>; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +/* Console UART */ > +&uart_AO { > + status = "okay"; > + pinctrl-0 = <&uart_ao_a_pins>; > + pinctrl-names = "default"; > +}; > + > +/* S905W only has access to its internal PHY */ > +ðmac { > + status = "okay"; > + phy-mode = "rmii"; > + phy-handle = <&internal_phy>; > +}; > + > +&internal_phy { > + status = "okay"; > + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; > + pinctrl-names = "default"; > +}; > + > +&uart_A { > + status = "okay"; > + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; > + pinctrl-names = "default"; > + uart-has-rtscts; > +}; > + > +&uart_C { > + status = "okay"; > + pinctrl-0 = <&uart_c_pins>; > + pinctrl-names = "default"; > +}; > + > +&uart_AO_B { > + status = "okay"; > + pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>; > + pinctrl-names = "default"; > + uart-has-rtscts; > +}; > + > +&i2c_B { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c_b_pins>; > + > + pcf8563: pcf8563@51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + status = "okay"; > + }; > +}; > diff --git a/board/amlogic/jethub-j80/MAINTAINERS > b/board/amlogic/jethub-j80/MAINTAINERS > new file mode 100644 > index 0000000000..1b8fbf8c35 > --- /dev/null > +++ b/board/amlogic/jethub-j80/MAINTAINERS > @@ -0,0 +1,6 @@ > +JetHome JetHub J80 > +M: Vyacheslav Bocharov <ad...@lexina.in> > +S: Maintained > +L: u-boot-amlo...@groups.io > +F: board/amlogic/jethub-j80/ > +F: configs/jethub_j80_defconfig > diff --git a/board/amlogic/jethub-j80/Makefile > b/board/amlogic/jethub-j80/Makefile > new file mode 100644 > index 0000000000..a727a4b222 > --- /dev/null > +++ b/board/amlogic/jethub-j80/Makefile > @@ -0,0 +1,6 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +# > +# (C) Copyright 2021 Vyacheslav Bocharov > +# Author: Vyacheslav Bocharov <ad...@lexina.in> > + > +obj-y := jethub-j80.o > diff --git a/board/amlogic/jethub-j80/jethub-j80.c > b/board/amlogic/jethub-j80/jethub-j80.c > new file mode 100644 > index 0000000000..2a9ffb794f > --- /dev/null > +++ b/board/amlogic/jethub-j80/jethub-j80.c > @@ -0,0 +1,68 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2021 Vyacheslav Bocharov > + * Author: Vyacheslav Bocharov <ad...@lexina.in> > + * Author: Neil Armstrong <narmstr...@baylibre.com> > + * > + */ > + > +#include <common.h> > +#include <dm.h> > +#include <adc.h> > +#include <env.h> > +#include <init.h> > +#include <net.h> > +#include <asm/io.h> > +#include <asm/arch/gx.h> > +#include <asm/arch/sm.h> > +#include <asm/arch/eth.h> > +#include <asm/arch/mem.h> > + > +#define EFUSE_SN_OFFSET 50 > +#define EFUSE_SN_SIZE 32 > +#define EFUSE_MAC_OFFSET 0 > +#define EFUSE_MAC_SIZE 6 > +#define EFUSE_USID_OFFSET 18 > +#define EFUSE_USID_SIZE 32 > + > +int misc_init_r(void) > +{ > + u8 mac_addr[EFUSE_MAC_SIZE]; > + char serial[EFUSE_SN_SIZE]; > + char usid[EFUSE_USID_SIZE]; > + ssize_t len; > + unsigned int adcval; > + int ret; > + char value[16]; > + > + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { > + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, > + mac_addr, EFUSE_MAC_SIZE); > + if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) > + eth_env_set_enetaddr("ethaddr", mac_addr); > + else > + meson_generate_serial_ethaddr(); > + } > + > + if (!env_get("serial")) { > + len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, ERROR: trailing whitespace #777: FILE: board/amlogic/jethub-j80/jethub-j80.c:48: +^I^Ilen = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, $ CHECK: Alignment should match open parenthesis #778: FILE: board/amlogic/jethub-j80/jethub-j80.c:49: + len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, + EFUSE_SN_SIZE); CHECK: Alignment should match open parenthesis #785: FILE: board/amlogic/jethub-j80/jethub-j80.c:56: + len = meson_sm_read_efuse(EFUSE_USID_OFFSET, usid, + EFUSE_USID_SIZE); > + EFUSE_SN_SIZE); > + if (len == EFUSE_SN_SIZE) > + env_set("serial", serial); > + } > + > + if (!env_get("usid")) { > + len = meson_sm_read_efuse(EFUSE_USID_OFFSET, usid, > + EFUSE_USID_SIZE); > + if (len == EFUSE_USID_SIZE) > + env_set("usid", usid); > + } > + > + ret = adc_channel_single_shot("adc@8680", 0, &adcval); > + if (adcval < 3000) > + env_set("userbutton", "true"); > + else > + env_set("userbutton", "false"); > + > + return 0; > +} > diff --git a/configs/jethub_j100_defconfig b/configs/jethub_j100_defconfig > new file mode 100644 > index 0000000000..290ce4db85 > --- /dev/null > +++ b/configs/jethub_j100_defconfig This file isn't part of any MAINTAINERS file, either add it to the s400 one or the j80 one. > @@ -0,0 +1,55 @@ > +CONFIG_ARM=y > +CONFIG_SYS_CONFIG_NAME="jethub" > +CONFIG_ARCH_MESON=y > +CONFIG_SYS_TEXT_BASE=0x01000000 > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_ENV_SIZE=0x2000 > +CONFIG_DM_GPIO=y > +CONFIG_DEFAULT_DEVICE_TREE="meson-axg-jethome-jethub-j100" > +CONFIG_MESON_AXG=y > +CONFIG_DEBUG_UART_BASE=0xff803000 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_IDENT_STRING=" jethubj100" > +CONFIG_DEBUG_UART=y > +CONFIG_OF_BOARD_SETUP=y > +# CONFIG_DISPLAY_CPUINFO is not set > +CONFIG_MISC_INIT_R=y > +# CONFIG_CMD_BDI is not set > +# CONFIG_CMD_IMI is not set > +CONFIG_CMD_GPIO=y > +CONFIG_RANDOM_UUID=y > +# CONFIG_CMD_LOADS is not set > +CONFIG_CMD_MMC=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_USB_MASS_STORAGE=y > +CONFIG_CMD_REGULATOR=y > +CONFIG_PARTITION_TYPE_GUID=y > +CONFIG_OF_CONTROL=y > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_MMC_MESON_GX=y > +CONFIG_MTD_UBI=y > +CONFIG_PHY_REALTEK=y > +CONFIG_DM_ETH=y > +CONFIG_ETH_DESIGNWARE_MESON8B=y > +CONFIG_MESON_GXL_USB_PHY=y > +CONFIG_PINCTRL=y > +CONFIG_PINCTRL_MESON_AXG=y > +CONFIG_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_FIXED=y > +CONFIG_DM_RESET=y > +CONFIG_DEBUG_UART_ANNOUNCE=y > +CONFIG_DEBUG_UART_SKIP_INIT=y > +CONFIG_MESON_SERIAL=y > +CONFIG_USB=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_XHCI_DWC3=y > +CONFIG_USB_DWC2=y > +CONFIG_USB_DWC3=y > +# CONFIG_USB_DWC3_GADGET is not set > +CONFIG_USB_DWC3_MESON_GXL=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e > +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada > +CONFIG_USB_GADGET_DWC2_OTG=y > +CONFIG_USB_GADGET_DOWNLOAD=y > +CONFIG_OF_LIBFDT_OVERLAY=y > diff --git a/configs/jethub_j80_defconfig b/configs/jethub_j80_defconfig > new file mode 100644 > index 0000000000..7db05af3b0 > --- /dev/null > +++ b/configs/jethub_j80_defconfig > @@ -0,0 +1,63 @@ > +CONFIG_ARM=y > +CONFIG_SYS_BOARD="jethub-j80" > +CONFIG_SYS_CONFIG_NAME="jethub" > +CONFIG_ARCH_MESON=y > +CONFIG_SYS_TEXT_BASE=0x01000000 > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_ENV_SIZE=0x2000 > +CONFIG_DM_GPIO=y > +CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905w-jethome-jethub-j80" > +CONFIG_MESON_GXL=y > +CONFIG_DEBUG_UART_BASE=0xc81004c0 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_IDENT_STRING=" jethubj80" > +CONFIG_DEBUG_UART=y > +CONFIG_OF_BOARD_SETUP=y > +CONFIG_CONSOLE_MUX=y > +# CONFIG_DISPLAY_CPUINFO is not set > +CONFIG_MISC_INIT_R=y > +# CONFIG_CMD_BDI is not set > +# CONFIG_CMD_IMI is not set > +CONFIG_CMD_ADC=y > +CONFIG_CMD_GPIO=y > +CONFIG_RANDOM_UUID=y > +# CONFIG_CMD_LOADS is not set > +CONFIG_CMD_MMC=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_USB_MASS_STORAGE=y > +CONFIG_CMD_REGULATOR=y > +CONFIG_PARTITION_TYPE_GUID=y > +CONFIG_OF_CONTROL=y > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_SARADC_MESON=y > +CONFIG_MMC_MESON_GX=y > +CONFIG_MTD_UBI=y > +CONFIG_PHY_MESON_GXL=y > +CONFIG_DM_ETH=y > +CONFIG_DM_MDIO=y > +CONFIG_DM_MDIO_MUX=y > +CONFIG_ETH_DESIGNWARE_MESON8B=y > +CONFIG_MDIO_MUX_MMIOREG=y > +CONFIG_MESON_GXL_USB_PHY=y > +CONFIG_PINCTRL=y > +CONFIG_PINCTRL_MESON_GXL=y > +CONFIG_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_FIXED=y > +CONFIG_DM_RESET=y > +CONFIG_DEBUG_UART_ANNOUNCE=y > +CONFIG_DEBUG_UART_SKIP_INIT=y > +CONFIG_MESON_SERIAL=y > +CONFIG_USB=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_XHCI_DWC3=y > +CONFIG_USB_DWC2=y > +CONFIG_USB_DWC3=y > +# CONFIG_USB_DWC3_GADGET is not set > +CONFIG_USB_DWC3_MESON_GXL=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e > +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada > +CONFIG_USB_GADGET_DWC2_OTG=y > +CONFIG_USB_GADGET_DOWNLOAD=y > +CONFIG_OF_LIBFDT_OVERLAY=y > Thanks, Neil
