The WDT devices described in the general .dtsi file
should be marked as "disabled" by default.
A WDT should be then enabled in the board specific
.dts file on demands.
Signed-off-by: Chia-Wei Wang <chiawei_w...@aspeedtech.com>
---
arch/arm/dts/ast2600.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi
index ac0f08b7ea..f121f547e6 100644
--- a/arch/arm/dts/ast2600.dtsi
+++ b/arch/arm/dts/ast2600.dtsi
@@ -474,21 +474,25 @@
wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e785000 0x40>;
+ status = "disabled";
};
wdt2: watchdog@1e785040 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e785040 0x40>;
+ status = "disabled";
};
wdt3: watchdog@1e785080 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e785080 0x40>;
+ status = "disabled";
};
wdt4: watchdog@1e7850C0 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e7850C0 0x40>;
+ status = "disabled";
};
lpc: lpc@1e789000 {
--
2.17.1
