On Sun, Sep 12, 2021 at 10:39 PM Oleksandr Suvorov <oleksandr.suvo...@foundries.io> wrote: > > Move setting the default boot command to the > apalis/colibri_imx6_defconfig. It allows replacing the command > without code modification. > > Signed-off-by: Oleksandr Suvorov <oleksandr.suvo...@foundries.io> > --- > > configs/apalis_imx6_defconfig | 1 + > configs/colibri_imx6_defconfig | 1 + > include/configs/apalis_imx6.h | 4 ---- > include/configs/colibri_imx6.h | 4 ---- > 4 files changed, 2 insertions(+), 8 deletions(-) > > diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig > index a0e85ba23a4..a2e0f8e3936 100644 > --- a/configs/apalis_imx6_defconfig > +++ b/configs/apalis_imx6_defconfig > @@ -23,6 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y > CONFIG_FIT=y > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" > CONFIG_BOOTDELAY=1 > +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout > serial,vidconsole;setenv stdin serial,usbkbd" > # CONFIG_DISPLAY_BOARDINFO is not set > CONFIG_DISPLAY_BOARDINFO_LATE=y > CONFIG_BOARD_EARLY_INIT_F=y > diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig > index 47b1cfb1917..bee4e7edd63 100644 > --- a/configs/colibri_imx6_defconfig > +++ b/configs/colibri_imx6_defconfig > @@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y > CONFIG_FIT=y > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" > CONFIG_BOOTDELAY=1 > +CONFIG_BOOTCOMMAND="run distro_bootcmd;usb start;setenv stdout > serial,vidconsole;setenv stdin serial,usbkbd" > # CONFIG_DISPLAY_BOARDINFO is not set > CONFIG_DISPLAY_BOARDINFO_LATE=y > CONFIG_BOARD_EARLY_INIT_F=y > diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h > index 12de0105c6c..ade479cb943 100644 > --- a/include/configs/apalis_imx6.h > +++ b/include/configs/apalis_imx6.h > @@ -133,10 +133,6 @@ > #endif > #define CONFIG_EXTRA_ENV_SETTINGS \ > BOOTENV \ > - "bootcmd=run distro_bootcmd ; " \ > - "usb start ; " \ > - "setenv stdout serial,vidconsole; " \ > - "setenv stdin serial,usbkbd\0" \ > "boot_file=zImage\0" \ > "console=ttymxc0\0" \ > "defargs=enable_wait_mode=off vmalloc=400M\0" \ > diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h > index 804a144a03e..f91d6b49ea8 100644 > --- a/include/configs/colibri_imx6.h > +++ b/include/configs/colibri_imx6.h > @@ -115,10 +115,6 @@ > #define FDT_FILE "imx6dl-colibri-eval-v3.dtb" > #define CONFIG_EXTRA_ENV_SETTINGS \ > BOOTENV \ > - "bootcmd=run distro_bootcmd; " \ > - "usb start ; " \ > - "setenv stdout serial,vidconsole; " \ > - "setenv stdin serial,usbkbd\0" \ > "boot_file=zImage\0" \ > "console=ttymxc0\0" \ > "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \ > -- > 2.31.1 >
Reviewed-by: Igor Opaniuk <igor.opan...@foundries.io> -- Best regards - Freundliche Grüsse - Meilleures salutations Igor Opaniuk Embedded Software Engineer T: +380 938364067 E: igor.opan...@foundries.io W: www.foundries.io
