It has long been known that we need to enable SPL_OF_CONTROL on this
platform, as some included drivers do not function correctly without it,
but were also stuck due to size constraints. Resolve this problem by:
- Updating the generic board.c file to use CONFIG_IS_ENABLED(USB_ETHER)
to distinguish between SPL and full U-Boot.
- Disable SPL_ETH support as the CPSW driver (and related PHY/etc) are
were we need SPL_OF_CONTROL support, but cannot due to size constraints.
- Update the documentation on how to enable this mode and recommend what
to remove in order to fit within size constraints.
Cc: Simon Glass <s...@chromium.org>
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
arch/arm/mach-omap2/am33xx/board.c | 2 +-
configs/am335x_evm_defconfig | 2 +-
doc/board/ti/am335x_evm.rst | 10 ++++++++++
3 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/am33xx/board.c
b/arch/arm/mach-omap2/am33xx/board.c
index d390f2e1f3e8..db268b1381e7 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -338,7 +338,7 @@ int arch_misc_init(void)
if (ret || !dev)
return ret;
-#if defined(CONFIG_DM_ETH) && defined(CONFIG_USB_ETHER)
+#if defined(CONFIG_DM_ETH) && CONFIG_IS_ENABLED(USB_ETHER)
ret = usb_ether_init();
if (ret) {
pr_err("USB ether init failed\n");
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index ef8de5999e0d..d497ca8d96ba 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -14,7 +14,6 @@ CONFIG_LOGLEVEL=3
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_FIT_IMAGE_TINY=y
-CONFIG_SPL_ETH=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_MUSB_NEW=y
@@ -37,6 +36,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)"
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIST="am335x-evm am335x-bone am335x-sancloud-bbe am335x-boneblack
am335x-evmsk am335x-bonegreen am335x-icev2 am335x-pocketbeagle"
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
diff --git a/doc/board/ti/am335x_evm.rst b/doc/board/ti/am335x_evm.rst
index a90f32da7aea..55315e0ad79b 100644
--- a/doc/board/ti/am335x_evm.rst
+++ b/doc/board/ti/am335x_evm.rst
@@ -86,6 +86,16 @@ Step-2: Flashing NAND via MMC/SD
Step-3: Set BOOTSEL pin to select NAND boot, and POR the device.
The device should boot from images flashed on NAND device.
+Ethernet Boot
+-------------
+
+The AM335x SoC supports booting from CPSW ethernet. This feature is not
+enabled in U-Boot by default. In order to support this ``CONFIG_SPL_ETH``
+needs to be enabled and in order to have U-Boot fit within size constraints you
+will need to disable some other functionality. Disabling
+``CONFIG_SPL_USB_GADGET`` and ``CONFIG_SPL_MUSB_NEW`` is recommended as this is
+used to provide SPL support via USB networking instead, which is unlikely to be
+used in the same design.
Falcon Mode
-----------
--
2.17.1
