Falcon mode requires a board-specific mechanism to select between
fast and normal boot. This is done via spl_start_uboot()
Use the B2 button as the selection mechanism. This is connected to
GPIO PA13. Incidentally, this GPIO is already accessible via the
"st,fastboot-gpios" devicetree node.
Offsets for raw MMC loading are defined. These point to the partition
after "ssbl".
Signed-off-by: Alexandru Gagniuc <mr.nuke...@gmail.com>
---
board/st/stm32mp1/spl.c | 39 ++++++++++++++++++++++++++++++++++++++
include/configs/stm32mp1.h | 13 +++++++++++++
2 files changed, 52 insertions(+)
diff --git a/board/st/stm32mp1/spl.c b/board/st/stm32mp1/spl.c
index 8e4549a1b3..bb210d7727 100644
--- a/board/st/stm32mp1/spl.c
+++ b/board/st/stm32mp1/spl.c
@@ -8,6 +8,7 @@
#include <init.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include "../common/stpmic1.h"
@@ -29,6 +30,44 @@ int board_early_init_f(void)
return 0;
}
+#if IS_ENABLED(CONFIG_SPL_OS_BOOT)
+int spl_start_uboot(void)
+{
+ ofnode node;
+ struct gpio_desc gpio;
+ int boot_uboot = 1;
+
+ node = ofnode_path("/config");
+ if (!ofnode_valid(node)) {
+ pr_warn("%s: no /config node?\n", __func__);
+ return 0;
+ }
+
+ if (gpio_request_by_name_nodev(node, "st,fastboot-gpios", 0, &gpio,
+ GPIOD_IS_IN)) {
+ pr_warn("%s: could not find a /config/st,fastboot-gpios\n",
+ __func__);
+ return 1;
+ }
+
+ boot_uboot = dm_gpio_get_value(&gpio);
+ dm_gpio_free(NULL, &gpio);
+
+ return boot_uboot;
+}
+
+#if IS_ENABLED(CONFIG_ARMV7_NONSEC)
+/*
+ * A bit of a hack, but armv7_boot_nonsec() is provided by bootm.c. This is not
+ * available in SPL, so we have to provide an implementation.
+ */
+bool armv7_boot_nonsec(void)
+{
+ return 0;
+}
+#endif /* CONFIG_ARMV7_NONSEC */
+#endif /* CONFIG_SPL_OS_BOOT */
+
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
index 9fcd60285a..0849a1bddb 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp1.h
@@ -10,6 +10,19 @@
#include <linux/sizes.h>
#include <asm/arch/stm32.h>
+/*
+ * Arguments if falcon mode is used
+ * CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR is the partition after "ssbl"
+ * CONFIG_SYS_SPL_ARGS_ADDR is not used, but needs to point to valid RAM.
+ */
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 5154
+#define CONFIG_SYS_SPL_ARGS_ADDR 0xc4000000
+
+/* Falcon mode from SPI is not supported, but the defines are needed */
+#define CONFIG_SYS_SPI_KERNEL_OFFS (~0)
+#define CONFIG_SYS_SPI_ARGS_OFFS (~0)
+#define CONFIG_SYS_SPI_ARGS_SIZE 0
+
#ifndef CONFIG_TFABOOT
/* PSCI support */
#define CONFIG_ARMV7_SECURE_BASE STM32_SYSRAM_BASE
--
2.31.1
